ABLEGRID ANU- Power Supply Adapter User Manual

ABLEGRID ANU- Power Supply Adapter

INTRODUCTION

An adaptable and trustworthy way to power a variety of AC-DC converters is using the ABLEGRID ANU-Power Supply Adapter. Introduced by ABLEGRID in 2024, this power supply adapter is made to provide a steady 12-volt output with a 24-watt power rating, which makes it perfect for a range of electronic equipment. It guarantees a safe connection for steady power delivery with its barrel connector, which has a male-to-male gender. The adapter is lightweight (2.82 ounces) and small, measuring 8.6 x 7 x 1.4 inches. This makes it convenient to use and transport. The ABLEGRID ANU-Power Supply Adapter gives your gadgets the dependable power they require whether you’re at home, at work, or on the go. At a reasonable $9.99, it provides outstanding value without sacrificing quality, making it an essential accessory for anyone in need of trustworthy power solutions.

SPECIFICATIONS

WHAT’S IN THE BOX

• Adapter
• Manual

FEATURES

• Standard Voltage Output: Suitable for powering equipment that needs a 12V supply, it offers a steady 12V DC output.
• 2.5 amps of current are delivered by this current rating, making it appropriate for devices with moderate power needs.
• Power Rating: With a 24-watt rating, it provides enough power for a range of uses.
• Connector Specifications: This connector has a center-positive tip and measures 5.5 mm on the outside and 2.5 mm on the inside. It is compatible with a wide range of devices.
• Universal Input Voltage: It is useful anywhere in the globe and supports a broad input voltage range of 100-240VAC @ 50/60Hz.
• Built-in protections: To protect your devices and the adapter, there is built-in short circuit protection (SCP), over-voltage protection (OVP), and over-current protection (OCP).
• Assurance of Quality: We guarantee that the tested units are in excellent operating order.
• Manufacturer’s Guarantee: Includes a one-year service warranty and a 30-day money-back guarantee.
• Compact Size: Measuring only 8.6 x 7 x 1.4 inches, it is small enough to fit easily in confined spaces.
• Lightweight: With a weight of just 2.82 ounces, it is easy to travel with.
• AC Power supply: Fits into normal electrical outlets, this device runs on an AC power supply.
• Connector Type: Suitable with a range of AC-DC converters, it has a male-to-male barrel connector.
• Operating at a frequency range of 60 Hz, it provides consistent performance over a range of geographical locations.
• Reasonably priced at $9.99, this product provides an economical answer for power supply requirements.
• Adaptable Use: Compatible with various gadgets needing a 12V DC power source.

SETUP GUIDE

• Take the power adapter out of its package to unbox it.
• Examine the specifications: Make sure the output voltage (12V) and current (2.5A) are appropriate for the needs of your device.
• Connect to gadget: Insert the barrel connector’s male end into the power input on your gadget.
• Connect to Power Source: Place the AC plug of the adapter into a regular wall outlet.
• Check Connection: Make sure the adapter is connected into the wall outlet and your device correctly, and that the connection is secure.
• Power On gadget: To ensure that your gadget powers up properly, turn it on.
• Verify Correct Operation: Using the new power supply, make sure the gadget performs as it should.
• Watch for Problems: Keep an eye out for any indications of abnormal activity or malfunctioning in the adapter and device.
• Unplug When Not in Use: To conserve energy and extend the life of the adapter, unplug it from the power source when not in use.
• Maintain Clean Connections: To ensure a strong connection, make sure the connectors are clear of dust and debris.
• Prevent Overloading: In order to avoid damaging the adapter, do not exceed its maximum current rating of 2.5A.
• Examine Often: Make sure the adapter is regularly inspected for wear or evident damage.
• Use in Appropriate Environment: Steer clear of utilizing the adapter in very damp or humid areas.
• Store Correctly: When not in use, keep the adapter in a cool, dry area.

CARE & MAINTENANCE

• Keep Dry: To avoid electrical dangers, keep the adapter away from moisture and water.
• Prevent Physical Damage: Take caution when handling the adapter to avoid causing any physical harm to the housing or connector.
• Clean Gently: To clean the adapter’s exterior, use a dry, gentle cloth. Steer clear of abrasive items and harsh chemicals.
• Examine Frequently: Before each usage, look for wear or damage on the adapter.
• Avoid Overloading: Make sure the gadget plugged into the adapter doesn’t draw more current than the 2.5A maximum.
• put Correctly: To prevent damage, put the adapter in a cold, dry place when not in use.
• Verify that all connections are tight and clear of any dust or debris by checking them.
• Replace Faulty Components: If the integrated fuse blows, swap it out for the spare fuse that comes with it, or, if you’re unsure, get in touch with the manufacturer.
• Avoid Extreme Temperatures: To avoid damaging the adapter, keep it out of areas with a lot of heat or cold.
• Use with Compatible Devices: Make sure the adapter is utilized with gadgets that meet the specifications for their voltage and current.
• Regular Maintenance: Look for wear or malfunctions on a regular basis, and take quick action when necessary.
• Prevent Extended Use: Unplug the adapter from the power supply if it will not be used for a long time.
• Prevent Physical Stress: Take care not to bend or twist the connections or cables on the adapter too much.

TROUBLESHOOTING

Ensure proper connection of the barrel connector
The device not receiving power| Incompatible voltage or wattage| Verify device requirements match the adapter’s output
Adapter overheating| Continuous use with high-power device| Allow the adapter to cool down; avoid using it with high-power devices
The plug is loose in the socket| Poor connection| Adjust or use a different socket
Power cuts out intermittently| Loose connection or faulty wiring| Reinsert securely or try a different outlet
The adapter not fitting properly| Wrong connector size| Check compatibility or use an appropriate adapter
Device charging slowly| Insufficient power output| Ensure device power requirements are met
The adapter not working at all| Internal fault or damaged connector| Contact customer support for replacement
Sparking when plugging in| Poor contact in the socket| Try a different socket or contact support
The adapter light not turning on| Power source issue| Check the outlet or try a different one
Adapter making noise| High load or internal issue| Disconnect and contact support if the noise persists
The adapter stuck in the socket| Plug type mismatch| Carefully remove and use a different adapter
Device overheating during use| Incompatible voltage| Ensure the device is compatible with the output voltage

PROS & CONS

Pros:

1. Provides stable 12-volt output for consistent performance.
2. Compact and lightweight design, easy to carry.
3. The affordable price of $9.99, offering great value.
4. Compatible with a wide range of AC-DC converters.
5. Reliable and durable construction from ABLEGRID.

Cons:

1. Limited to 24 watts, may not support high-power devices.
2. Barrel connectors might not fit all device types.
3. No adjustable voltage feature for different device requirements.
4. Requires AC power source, limiting portability.
5. May not be compatible with non-standard connectors.

WARRANTY

The ABLEGRID ANU-Power Supply Adapter comes with a 12-month warranty provided by ABLEGRID. This warranty covers any manufacturing defects or issues with the adapter, ensuring that customers receive a fully functional and reliable product. In the event of any problems within the warranty period, ABLEGRID offers repair or replacement options, providing peace of mind to users.

FREQUENTLY ASKED QUESTIONS

What is the ABLEGRID ANU- Power Supply Adapter?

The ABLEGRID ANU- Power Supply Adapter is an AC-DC adapter designed to convert AC power from a wall outlet into a stable DC output for various electronic devices.

What is the input voltage of the ABLEGRID ANU- Power Supply Adapter?

The input voltage is 12 volts, which allows it to be compatible with devices requiring this specific voltage for operation.

What is the output voltage of the ABLEGRID ANU- Power Supply Adapter?

The output voltage of the adapter is also 12 volts, providing a consistent power supply for devices that require this voltage.

What is the wattage of the ABLEGRID ANU- Power Supply Adapter?

The adapter has a wattage of 24 watts, indicating its capacity to provide power to connected devices.

What is the current rating of the ABLEGRID ANU- Power Supply Adapter?

The adapter is rated for 2.5 amps, which defines the maximum current it can deliver safely.

What type of connector does the ABLEGRID ANU- Power Supply Adapter use?

The adapter uses a barrel connector, specifically male to male, for connecting to devices.

What is the connector type of the ABLEGRID ANU- Power Supply Adapter?

The connector type is a barrel connector, which is commonly used for various types of electronic equipment.

What is the power source for the ABLEGRID ANU- Power Supply Adapter?

The power source for this adapter is AC (alternating current), which is converted to DC (direct current) by the adapter.

What is the frequency range of the ABLEGRID ANU- Power Supply Adapter?

The adapter operates at a frequency range of 60 hertz, standard for most AC power systems.

What are the dimensions of the ABLEGRID ANU- Power Supply Adapter?

The product dimensions are 8.6 x 7 x 1.4 inches, providing a compact size that is convenient for use and storage.

How much does the ABLEGRID ANU- Power Supply Adapter weigh?

The adapter weighs approximately 2.82 ounces, making it lightweight and easy to handle.

What devices are compatible with the ABLEGRID ANU- Power Supply Adapter?

The adapter is compatible with AC-DC converters and devices that require a 12-volt power supply.

What is the price of the ABLEGRID ANU- Power Supply Adapter?

The adapter is priced at $9.99, offering a cost-effective solution for power conversion needs.

What type of devices are typically powered by the ABLEGRID ANU- Power Supply Adapter?

The adapter is typically used to power small electronic devices and equipment that require a 12-volt DC input, such as certain AC-DC converters and similar devices.

Why is my ABLEGRID ANU-Power Supply Adapter not powering my device?

Ensure that the ABLEGRID ANU-Power Supply Adapter is securely plugged into both the power outlet and the device. Verify that the power outlet is functioning by testing it with another device. If the problem persists, the adapter may need to be replaced.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>