ALLPOWERS R600 Portable Power Station User Guide

: June 10, 2024
: ALLPOWERS

Table of Contents

ALLPOWERS R600 Portable Power Station
Product Information
Radiation Exposure Statement
Product Usage Instructions
Safety Instructions
Specifications
User guide
- APP operation guide
FAQ
Troubleshooting
Package Contents
Statement
Contact us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ALLPOWERS R600 Portable Power Station

Product Information

The R600 device is a wireless charger that complies with FCC and Canada RF radiation exposure limits for an uncontrolled environment. It also contains a licence-exempt transmitter/receiver that complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). The device should not cause any harmful interference and must accept any interference received during operation. Any modifications not approved by the responsible party could void the user’s authority to operate the equipment.

Radiation Exposure Statement

The wireless charger emits RF radiation and must be operated with caution to avoid unwanted exposure. During operation, a distance of 15cm surrounding the device and 20cm above the top surface of the device must be respected. The Bluetooth component of the device should also be installed and operated with a minimum distance of 20cm between the radiator and the user’s body.

Product Usage Instructions

Ensure the device is plugged into a power source.
Place your compatible device on the wireless charging surface of the device.
The charging process will begin automatically.
During charging, ensure that no foreign objects are placed between the wireless charger and the device being charged.
When charging is complete, remove your device from the wireless charging surface.

Note : During operation, it is important to maintain a distance of 15cm surrounding the device and 20cm above the top surface of the device to avoid unwanted exposure to RF radiation. The Bluetooth component of the device should also be operated with a minimum distance of 20cm between the radiator and the user’s body.

The products and materials described in this manual will be changed at any time due to technical upgrades. The company reserves the final right to change and explain the contents of the manual.

Safety Instructions

This product is an power station battery, please make sure to take basic precautions, be sure to take basic precautions including:

Be sure to operate the product in a dry and well ventilated place, and if it gets wet, dry it thoroughly before use.
To reduce the risk of injury, close monitoring is required when using this product near children.
Do not stick your fingers into the product, otherwise it may cause electric shock or other dangers.
Do not touch the AC interface with metal, otherwise it may cause electric shock, fire and other dangers.
During charging or using the product, do not block the product vents, otherwise it may cause permanent damage to the product.
Please do not expose the product to rain and snow.
It is forbidden to use this product in the environment of strong static electricity or strong magnetic field.
. Please use the cable specially designed for the product, the company does not assume any responsibilty for the damage caused by the third party equipment.
Do not disassemble the product at will. f this product needs service or maintenance, please find a qualified repairer.
Improper use, falling or excessive force may cause damage to the product.
When disposing of used batteries, please separate batteries of different electrochemical systems.
In case of fire, dry powder fire extinguisher can be used or immersed in water.
Be sure to keep the product away from fire and heat sources.

Specifications

General Information

Net weight : Approximately 5.8KG (12.8lbs)
Size: 285X195X190mm(11.2×7.6×7.5inch)
Battery capacity : 299Wh (25.6V-11.68Ah)
Bluetooth : Support
UPS (uninterruptible power supply): Support

Input Ports

AC Input Voltage : (100-120)V-4A, (220-240)V-2A 400w(Max.) 50Hz/60Hz
Solar Charge : MPPT(12-60)V=12A, 300W(Max.)
Car Charger : Support 12V/24V

Output Ports

*AC Output 2** : 100-120V/220-240V 600W Max (Surged 1200W)
US 110-120V=5 A ; CN 220V2.7 A; EU 230V-2.6 A; AU 240V=2.5 A (max.)
*USB-A Output 2** : 5V=3A, 9V= 2A, 12V1.5A, 36W Max(QC3.0)
USB-C Output “2 : 5/9/15V 3A, 20V 5A, 200W Max(PD)
Car port/ DC5525 2 : 12V= 10A, 120W Max
Wireless charger : 15WN Max(Ql)

Battery Info

Battery type : LFP Lithium Iron Phosphate
Cycle life : 3500 cycles to 80%+ capacity
Protection type : High temperature protection, Low temperature protection, Over discharge protection, Over charge protection, Overload protection, Short circuit protection, Over current protection

Environmental Operating Temperature

Charge Temperature : 0°C ~ 40°C (32°F 104°F)
Discharge Temperature : -10°C~40°C(14°F~104° F)
Storage Temperature : -20°C-40°C(-4°F-104°F)
Operating humidity range : 10-90%

Certification
CE/UL/PSE/UKCA/ FCC/ ROHS/ UN38.3 / MSDS/ ISED

User guide

Product appearance introduction

ALLPOWERS-R600-Portable-Power-Station-FIG-1

Introduction of Display (Touch) lcons

ALLPOWERS-R600-Portable-Power-Station-FIG-2

AC charging
The AC power of this product adopts AP-POWER fast charging technology, and the charging power can be adjusted through the AC charging Fast Mode/Standard Mode/Mute Mode. The maximum input of Fast Mode can reach 400W; the maximum input of charging in Standard Mode can reach 300W; Mute Mode 200W (self- adjusting technology) to achieve mute. The default input power of custom charging is Mute Mode, and the charging power is adjustment needs to be set in the mode switch of this product. Please use the original standard AC charging cable of the product, ALLPOWERS will not bear any damage caused by the use of other unofficial charging cables bear any responsibility. Please connect directly to the wall power socket. It is not recommended to go through the extension power socket. At the same time, pay attention to whether the householdline can last for 10A current.lf the above conditions are not met, please switch to standard mode or mute mode for charging

Solar charging
Users can charge the product by connecting solar panels in series as shown in the figure.

ALLPOWERS-R600-Portable-Power-Station-FIG-5

When charge power station by solar panel,please according to user manual. Before connecting the solar panel,please confirm that the output voltage specification of the solar panel is within 12-60V, the maximum current is 12A, and the maximum charging power is within 300W.

UPS function (uninterruptible power supply)
This product supports UPS (Uninterruptible Power Supply) function. You connect the power grid and the AC input port of this product through the AC charging cable, and the electrical appliance can use the AC output port of this product to work (at this time, the AC power comes from the power grid, not the battery). When After the power grid is suddenly cut off, this product can automatically switch to the battery power Supply mode of this product within 1oms. It is recommended to use only one device during use, and do not use multiple devices at the same time to avoid overload protection of this product. If the power station fails to operate normally or data is lost if the operation is not in accordance with the instructions, our company does not assume the corresponding responsibility.

Note : When connecting to the power grid, you need to turn on the AC output first, and make sure that the UPS function icon is lit before power off and enter the UPS switching function.

Normally When fully charged, the power grid supply directly supplies power to the device.
Power cut off The R600 automatically powers the device.

APP operation guide

APP download:
Use your mobile phone to scan the QR code below to download and install the APP

Bluetooth connection power station:

Confirm that the power station and mobile phone Bluetooth are turned on;
Click the icon in the Bluetooth device bar on the mobile APP to enter the Bluetooth connection interface
Click Next to scan and search for power station
Select the corresponding power station and click to connect
After the connection is successful, AP R600 V2.0 will be displayed in the Bluetooth device bar

ALLPOWERS-R600-Portable-Power-Station-FIG-9

Mobile APP Operation Instructions

ALLPOWERS-R600-Portable-Power-Station-FIG-10

Charging power working mode setting: can be set to Fast Mode/Standard Mode/Mute Mode;
Operation mode setting, set to power saving mode, you can set the AC or DC off time to 1 hour or 2 hours, 4 hours, 6 hours, the power station working in this mode,AC or DC will be turned off after the set time.

ALLPOWERS-R600-Portable-Power-Station-FIG-11

FAQ

What type of battery does the product use?
This product use high-quality lithium iron phosphate batteries(LFP).
What devices can R600 power?
The AC output port of this product has a rated power of 100V-120V 600VW (peak 1200W) or 220V-240V 600w (peak 1200W), which can supply power to most household appliances. It is recommended that you confirm the power of the electrical appliance and ensure that the sum of the power of all load devices is less than the rated power
How to know how long the product can supply power?
The LCD screen of this product will display the battery life, which can be estimated for devices with stable power consumption.
How to judge the product is charging?
When charging, the LCD screen will display the remaining charging time, and the battery indicator circle outside the battery percentage has a breathing animation effect.
How to clean the product?
Wipe this product with a dry, soft, clean cloth or paper towel.
How to store the product?
When storing, please turn off this product first, and then store in a dry, ventilated place with room temperature. Do not place this product in water nearby. For long-term storage, it is recommended to discharge the battery to 30% and recharge to 60% every three months to prolong the service life of this product.
Can this product be brought on the plane?
No.
Can the R600 be charged while using?
Yes, the product supports simultaneous charging and discharging.
Is the actual output capacity of the product consistent with the target capacity in the user manual?
The capacity indicated in the user manual is the rated capacity of the battery pack of this product. Since this product has a certain efficiency loss during the charging and discharging process Therefore, the actual output capacity of the product is lower than the capacity specified inthe user manual. and display the input power.

Troubleshooting

The fault code is displayed at the position of the display screen, and the related fault type and recovery method are as follows.

ALLPOWERS-R600-Portable-Power-Station-FIG-12

Package Contents

ALLPOWERS-R600-Portable-Power-Station-FIG-13

Statement

Before using this product, please read the user manual of this product to ensure correct use after full understanding. If you do not operate this product correctly, you could cause serious injury to yourself or others, or result in product damage and property damage. Once you use this product, you are deemed to have understood, recognized and accepted all terms and content of this document. The user undertakes to be responsible for his own actions and all consequences arising therefrom. ALLPOWERS is not responsible for all losses caused by the user’s failure to use the product in accordance with the User Manual. In compliance with laws and regulations, the company reserves the right of final interpretation of this document and all related doCuments of this product. If it is updated, revised or terminated without prior notice, please visit the ALLPOWERS official website for the latest product information. This product is not intended for use in applications that require extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear power control equipment, and medical equipment. Please make a judgment after fully confirming the suitability of this product and this device by yourself. If this product is used in the above equipment or equipment, we will not be held responsible for any personal injury, fire, or malfunction of the equipment or equipment caused by the failure of this product.