Tefal IH201840 Everyday Induction Hob User Guide
- June 1, 2024
- Tefal
Table of Contents
IH201840 – Induction Hob Quick Start Guide
Induction Technology – Induction is a more efficient way of cooking, that uses less energy and reduces cooking times. It works by an induction hob producing a magnetic field which adgitates the material in a suitable induction piece of cookware, heating the cookware to enable cooking. The induction hob itself does not produce heat.
Induction Compatible Cookware
Cooking utensils
Suitable cooking pots
Double bottom pots made of iron series (enamel, cast iron or stainless steel)
or magnetic induction materials with flat bottom diameter of over 12 cm and
less than 24 cm.
Please refer to the cooking utensil manufacturer to confirm suitability for
induction cooking.
Product Structure
A. Ceramic plate
B. Air entry
C. Air exit
D. Control panel
E. Digital Display Screen
F. Manual Button
G. Heat milk Button
H. Stew Button
I. Fry Button
J. Deep fry Button
K. Boil water Button
L. Timer Button
M. “+”/“-”Button
N. On/off Button
Get started:
Plug in the hob and switch on the power.
Place suitable cookware on the hob.
Select a program or select manual mode for more control.
Full details of programs found in manual.
Tips for use:
- Automatic alarm function: if no pot or an unsuitable pot is sensed on the ceramic plate the internal detection system will generate an alarm.
- When the temperature of the ceramic plate is higher than 50°C at the end of cooking , LCD blinks and displays “H”. The fan continues to operate to cool the plate.
- The hob automatically switches-off after 5 minutes without any action.
ERROR CODES
E1 • No-pot or unsuitable pot material protection:
if the pot base diameter is less than 12 cm or if the pot material is
unsuitable, the buzzer will sound and the digital display shows E1. Change
cookware.
E2 • Power tube overheating protection:
when the power tube is overheating, the induction cooker will close the input
power and the display shows E2 .
E3/E4:• Over or under- voltage protection:
when the voltage is over 265V-285V, the induction cooker will shut off the
input power and the digital display shows E3; when the voltage is under 150V-
170V, the induction cooker will close the input power and the digital display
shows E4. Check that the mains voltage corresponds to that shown on the
appliance (alternating current).
E5/E6• Sensor detecting function:
when the sensor is open circuit, the cooker will continue working for one
minute and the digital display shows E5; when the sensor is short circuit, the
cooker will display E6 immediately. Contact the after-sale service.
Réf. : 1520015671
www.tefal.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>