HYUNDAI HY-B06 Bone Conduction Earphones Instruction Manual

HY-B06
Bone Conduction Earphones Manual

Please read all instructions carefully and retain for future use

Usage instruction

1. Don’t attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual.
2. Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
3. Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
4. Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
5. Don’t expose the unit to extremely high temperature or dispose of the unit in fire as it will result in an explosion.
6. Don’t place the unit in an electromagnetic interference environment to avoid malfunction.

Packing list

| |
---|---|---
Earphones X1 T| TYPE-C Charging cable X1| Instruction & Warranty card X1

Product specification

BT Version: V5.3
Transmission distance: 10m
The loudspeaker specification: φ16mm
Rated input: 5V ****100mA
Battery capacity: 150mAh
Charging time: About 2 hours
Playing time: About 8 hours

Product schematic diagram

1. Open the key
2. Plus key
3. The minus key
4. The microphone
5. Light
6. Type- C

Product Operation Guide

1. Power on/off

2. BT Pairing Procedure
   Power on: Long press 3S，Alternating red and blue lights flashing；
   Power off: Long press 3S，The red lights flashes once and then light off.

3. Open the devices BT list ,Find the “HY – B06” and connect.

4. When the earphones connect to the devices ，the blue light will flash.

Pairing status: alternating red and blue lights flashing
Paired success: Blue light flashing

Button Operation Guide

Charging indicator

1. Please Power off the earphones before charging.
2. Please charge the earphones according to the picture，Unable to charge if voltage exceeds 5 V.
3. Charging time about 2 hours.

Rated input：5V ****100mA

Restore factory settings
When the earphones power on is not connect with devices, press ① & ② at the same time for 4S ,and then all of pairing will be clear.

Name and content of hazardous substances in products

Name and content of hazardous substances in products

This form is compiled in accordance with SJ/T 11364.
◯: Indicates that the content of the hazardous substance in all homogeneous materials of the part is in Below the limit requirements specified in GB/T 26572.
X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds
The limit requirements specified in GB/T 26572.
The parts marked with “Ｘ”on the form are all harmful due to the limitations of global technological development.Substitution of substances.
Printed circuit board components*:including printed circuit boards and their parts,electronic components,etc.,Depending on the product model,the product you purchased may not contain all the above components
Electronic and electrical products sold in the People’s Republic of China must mark this Logo,the number in the logo represents the product under normal use Environmental protection use period.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill ti out and keep ti for future use！

User info

User name| | | Email
Contact number| | | Postal code
Mailing address|
Product information
Product name| | Product number|
Product barcode/Serial number/Batch number|
Vendor information

Name|
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|

Authorized by Hyundai Corporation
Authorized Party: Shenzhen Hyundai Digital Electronics Co., Ltd.
ddress: 601A.Chentian Research and Development Building,No.50. Baotian 1st
Road.Xixiang Street, Bao’an District.Shenzhen City.
HYUNDAL Creative(Shenzhen)Technology Development Co., Ltd
1915, Block A, Rongchuang Zhihui Building, intersection of Long Sheng Road and
Jing Long Construction Road ,Shang Fen Community, Minzhi Street, Longhua
District.Shenzhen.

F C C Statement

According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees In providing reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy,If this instruction is not installed and used inaccordance with the regulations, it may causeharmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particular installation. If this device has built for radio or television reception Into harmful interference, the device can be determined by turning it off and on when the user is encouraged to try to pass through one or Several more measures below

• Redirect or reposition the receiving antenna.
  Increase the distance between device and rec iver.

• Sockets connected to devices on circuits different from the receiver are connected.

• Please consult a dealer or experienced radio/TV technician for assistance.

This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions

1. The device shall not cause harmful interference.
2. The device must accept any received interference, including interference that may cause unexpected operation.

Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission tooperate the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cmbetween the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>