WYBOT 2024 Handheld Pool Vacuum with Dual Suction Heads User Manual
- June 1, 2024
- WYBOT
Table of Contents
WYBOT 2024 Handheld Pool Vacuum with Dual Suction Heads
Product Information
Specifications:
- Brand: Wybot
- Model: Handheld Pool Cleaner
- Usage: Cleaning pool surfaces
- Power: Battery-operated
- Charging Time: 3-4 hours
- Usage Time: Up to 60 minutes
Product Usage Instructions
Maintenance and Charging:
- Ensure the device is turned off before charging to prevent any issues.
- Inspect the charging port for debris or water damage; ensure it is clean and dry before charging.
- Charge the device for 3-4 hours for optimal performance.
Starting and Operating
- Press and hold the red power button for 3-5 seconds to start the device.
- Submerge the machine fully into the water and wait for 1 minute before it starts operating.
- Ensure the device is not obstructed by any debris or tangled items.
Troubleshooting:
If you encounter any issues such as the machine not functioning properly or stopping unexpectedly, follow these steps:
- Check if the machine is fully submerged in water.
- Inspect the impeller for obstructions.
- Ensure the casing is securely in place.
Frequently Asked Questions
Q: Why is the machine not functioning properly?
- Ensure the machine is fully charged before use, as low battery levels may hinder proper functioning.
- Press and hold the red power button for 3-5 seconds. Wait for 1 minute after submerging the machine into the water, as there is a 1-minute interval before it starts.
- Check if the motor is starting; if not, contact Wybot customer service (support@wybotpool.com) for further assistance.
Q: Why won’t the machine charge?
- Turn off the device before charging, as it won’t charge when powered on.
- Inspect the charging port for any signs of water damage or dirt that may obstruct charging. Additionally, confirm that the charger is connected correctly to facilitate proper charging.
- Verify that the charger indicator is red during charging; if not, contact Wybot customer service: support@wybotpool.com.
Q: Why does my machine keep stopping?
A: 1. Check whether the machine is completely submerged in water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>