WYBOT A1 Cordless Robotic Pool Cleaner User Manual
- June 1, 2024
- WYBOT
Table of Contents
WYBOT A1 Cordless Robotic Pool Cleaner
Product Information
Specifications :
- Product Name: Pool Cleaner XYZ
- Designed for: Floor cleaning only
- Power Source: Rechargeable battery
- Usage: Suitable for flat floors
- Additional Features: Cycle timer, obstacle detection
Product Usage Instructions
Floor Cleaning:
The Pool Cleaner XYZ is designed for floor cleaning in swimming pools.
Follow these steps for optimal performance:
- Ensure the cleaner is fully charged before use.
- Select the desired cleaning cycle using the cycle timer.
- Gently place the cleaner in the pool, ensuring it is fully immersed.
- Avoid restarting or charging the cleaner once it has begun its cleaning cycle.
Troubleshooting:
If you encounter issues such as the device not rotating or beeping, follow
these steps:
- Check if the flipper is stuck and attempt to manually rotate it.
- If issues persist, contact after-sales service at support@wybotpool.com .
Obstacle Detection:
The Pool Cleaner XYZ may encounter obstacles in the pool. Here’s how to
handle them:
- Avoid placing the cleaner in areas with high obstacles that may cause it to get stuck.
- If the machine encounters obstacles like steps or drains, gently remove and reposition it.
Frequently Asked Questions (FAQ):
-
Q: Could this machine do wall and waterline cleaning?
A: This pool cleaner is specifically designed for floor cleaning only. It does not support wall or waterline cleaning. -
Q: Will obstacles affect the running of the machine?
A: The machine operates best on flat floors. High obstacles may cause the device to become stuck. -
Q: Why does the device continue to beep or impeller not rotate after immersion?
A: Check if the flipper is stuck. Contact after-sales service if issue persists. -
Q: Why did the cycle timer not work?
A: Ensure the cleaner is fully charged before selecting a cycle. Avoid restarting or charging it once in the pool. -
Q: Why does the device not reverse while touching the wall?
A: Check power, swing plate, and clear any obstacles near the machine. -
Q: Why does my machine not have full coverage for the floor?
A: Check wheel angle settings and shut down water circulation during cleaning.
Frequently Asked Questions (FAQ)
Could this machine do wall and waterline cleaning?
This pool cleaner is specifically designed for floor cleaning only. It does not support wall or waterline cleaning.
Will obstacles such as steps, shallow water areas, drains, slopes, etc., in the swimming pool affect the running?
The machine operates best on flat floors. High obstacles may cause the device to become stuck.
Why did I set the cycle timer, but it didn’t work?
Ensure the cleaner is fully charged before selecting a cycle cleaning. Once placed in the pool, avoid restarting or charging it, as this could reset the previously set program.
Why does the device not reverse while touching the wall?
Check if the machine has no power and automatically parked by the wall. Examine if the swing plate is stuck; clear the movable cavity if necessary. Verify if there are any obstacles hindering the machine.
Why does my machine not have full coverage for the floor?
Check if you've set the proper wheel angle according to your pool shapes. Shut down the swimming pool water circulation system.
Q: Why does the device continue to beep, or the impeller does not rotate
after the cleaner is fully immersed in the water?
A: Check if the flipper is stuck. Remove the cleaner from the pool and attempt
to manually rotate the flipper. If the issue persists, contact the after-sales
service ( support@wybotpool.com ).