FARO 68610 Ceiling lamp Amelia Installation Guide
- June 1, 2024
- Faro
Table of Contents
FARO 68610 Ceiling lamp Amelia
Product Information
Specifications
- Light Source: 1 x E27 MAX 15W LED (not included)
- IP Rating: IP44
- Cable Length: 225cm
Product Usage Instructions
Installation
- Ensure the power source is switched off before installation.
- Mount the fixture securely in the desired location using appropriate hardware.
- Connect the light source (E27 MAX 15W LED) to the fixture following the manufacturer’s instructions.
- Ensure all connections are secure before turning on the power.
Maintenance
- Regularly clean the fixture using a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or abrasive materials that may damage the surface.
Safety Precautions
- Avoid exposing the fixture to direct water contact as it is rated IP44.
- Do not exceed the recommended wattage for the light source (E27 MAX 15W LED).
- If the fixture shows any signs of damage, discontinue use immediately and seek professional assistance.
FAQ
- What is the IP rating of the product?
- The product has an IP44 rating, indicating protection against solid objects larger than 1mm and water splashes from any direction.
- Can I use a higher-wattage bulb than recommended?
- No, it is recommended to use a maximum 15W LED bulb to prevent damage to the fixture and ensure safe operation.
POWER
Installation Instructions
TECHNICAL FEATURES
- 1 x E27 MAX 15W LED no incl
Dimension
- When the luminaire reaches its end of life, take it to the nearest clean point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>