Forum Lighting ZN-41102-BRNZ Wall Light Brac Double Spotlight Instruction Manual
- June 1, 2024
- Forum Lighting
Table of Contents
Forum Lighting ZN-41102-BRNZ Wall Light Brac Double Spotlight
Product Using Instructions
Step-by-Step Visual Guide
- Step 1: Initial Configuration
- An image of an electrical terminal block with multiple connections. A hand is shown pulling a lever on the block downwards.
- Step 2: Preparing for Installation
- An image depicting the ‘OFF’ position, showing a hand turning a screw into a wall, with a curved arrow indicating the turning direction.
- Step 3: Electrical Connections
- An image showing the electrical wires being connected to the back of the terminal. The wires are color-coded: Blue and Brown. Labels “N” and “L” indicate the neutral and live wire terminals respectively.
- Step 4: Mounting the Device
- An image of a cylindrical device being mounted onto a wall with a curved arrow indicating the direction to rotate the device for proper installation.
- Step 5: Securing the Device
- An image displaying the device with its top part detached. An arrow points downwards, indicating the top should be placed over the bottom and turned to secure it in place.
- Step 6: Finalizing Installation
- An image of the electrical terminal block with a hand pushing the lever upwards. An arrow labeled ‘ON’ points in the direction of the lever’s movement, indicating the power is now activated.
Please take time to read this leaflet carefully and retain it for future reference.
Specifications
Model | INS ZN 41102 – A |
---|---|
Electrical Connections | Blue (Neutral), Brown (Live) |
Operation | Mounting and securing the device, turning ON/OFF |
FAQ
- How do I ensure the device is properly secured?
- After mounting the device, place the top part over the bottom and rotate it as indicated by the downward arrow to secure it in place.
- What do the ‘N’ and ‘L’ labels signify on the electrical terminal?
- The ‘N’ stands for Neutral and the ‘L’ stands for Live. These labels indicate where to connect the blue and brown wires respectively.
- How do I know if the power is activated after installation?
- Once the installation is complete, push the lever on the electrical terminal block upwards. The lever pointing upwards with the label ‘ON’ indicates that the power is activated.
Power
Power Off
Power On
Installation Instructions
Please take time to read this leaflet carefully and retain it for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>