Intenso WPD10000 Powerbank User Manual

User Manual POWERBANK
WPD10000

WPD10000 Powerbank

Please read this manual carefully and observe and follow all the instructions mentioned in it to ensure a long service life and reliable use of the device. Keep this manual handy and pass it on to other users of the device.

OPERATING INSTRUCTION

SAFETY

Intended use
This Powerbank can be used to power devices having an operating voltage of 5V direct current (cell phones, MP3 players, etc.), as well as devices supporting the Power Delivery Standard (PD) or the Qualcomm® Quick Charge™ technology standard and for wireless charging devices which are Qi-enabled. Please check the operating instructions or ask the manufacturer whether your device supports the Qi standard.
Any other use or use beyond what is specified is deemed as not intended use and can lead to damages and injuries. This product is not intended for commercial use or for medical and special applications, where the failure of the product can cause injuries, mortalities or considerable material damages. Claims of any type for damages resulting from use other than for the intended purpose or non-observance of the safety instructions are excluded.
The firmware and/or hardware may be changed at any time without prior notice. For this reason it is possi-ble that parts of these instructions, technical data and images in this documentation differ slightly from the product in your possession. All points described in these instructions only serve the purpose of clarification and must not inevitably correspond to a certain situation. Legal claims cannot be made on the basis of these instructions.
Safety instructions
Dangers for children and persons with restricted physical, sensory or mental abilities:
Children often underestimate dangers or do not recognize them at all. This device is not intended to be used by persons (including children) with restricted sensory, physical or mental abilities or lack of experience and/or knowledge, unless they are supervised by a person responsible for their safety or received instruc-tions from the person on how to use the device and they have understood the resultant dangers. Unsuper-vised children should not have access to the device. Make sure that children do not play with the device.
Danger of asphyxiation!
Children can put the packaging film or small parts in their mouths and choke on them.
Risk of short circuit!
To avoid injury, do not operate this appliance with wet hands.
Do not insert any items, which are not intended for its use, into the openings of the device. This could lead to an electrical short-circuit and a resultant fire.
Do not use the device if there is visible damage to the device itself or to the USB cable, as this may result in injury or damage.
The device may not be exposed to spray or dripping water.
Do not place containers filled with liquids (vases, glasses, etc.) on the device or in its immediate vicinity.
There is a risk that the container will tip over and the liquid will affect the electrical safety.
Tripping hazard!
When positioning the device, pay attention that no one can tread on the cable or trip over it. Do not place any objects onto the cable.

Damage!
Do not use the device in extremely cold, hot, humid or dusty areas. Do not subject it to direct sunlight.
Protect the product from open fire. There is danger of explosion!
Protect the device in every operating state against impact and falling.
This device is sensitive to electrostatic discharge. Therefore protect the device against every possible elec-trostatic discharge.
To avoid malfunctions, do not connect the USB output ports of the device with USB ports of computers or other devices. They are only intended for charging devices.
To avoid overheating, do not block or cover the openings of the product.
Do not cover the product completely during operation to ensure heat dissipation.
Do not open the housing of the device and do not disassemble it into its component parts. Do not try to repair it yourself. The guarantee expires in this case.

WARNING! Hot surface!
Holding the device for longer periods when in use can result in the surface becoming hot, causing skin injuries. When using the device, avoid holding it for too long, especially in areas which become very hot. Do not carry the device directly on your body. The device can be touched for longer periods after it has cooled down.

Declaration of conformity
** The CE marking says that this product meets the requirements of all EU Directives applicable for this product.
The UKCA marking says, that this product meets the requirements of all UK Directives applicable for this product.
Declaration of conformity**
Hereby Intenso International declares that the radio installation type Powerbank WPD10000 complies with the Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available at the follo-wing Internet address www.intenso.eu.

SCOPE OF DELIVERY

1. Intenso Powerbank WPD10000
2. Operating instruction
3. USB-C to USB-C charging cable (supports PD)

Please check whether the contents of the packaging (see also graphic at the beginning of the manual on page 2) are complete and undamaged. If this is not the case, please contact the seller or our service depart-ment: rma@intenso- international.de

USE

Device overview

1. Status LED
2. Function key (ON/OFF)
3. USB-A 1 Out (QC)
4. USB-C Out (PD/QC) / In (PD)
5. USB-A 2 Out (QC)
6. Wireless Charging Area

Operation
Function key (On/Off)
By briefly pressing, the current battery status is displayed through the LED lights and the wireless charging function of the Powerbank is activated.
If there is no device connected to the Powerbank, or the connected device signals to the power bank that it is entirely charged, the power bank will automatically switch to the standby mode after a time interval of approximately 40 seconds.
LED Status display
The individual LEDs display the remaining energy of the Powerbank:

| LED lights
---|---
% – energy| LED 1| LED 2| LED 3| LED 4
1 % – 25 %| •| º| º| º
26 % – 50 %| •| •| º| º
51 % – 75%| •| •| •| º
76 % – 100 %| •| •| •| •

Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied cable USB-C to the port USB-C (USB-C Out/In) of the Powerbank; then connect the other end of the USB cable to a power supply USB-C or to a port USB-C on your compu- ter. The charging process and current charging status will be indicated by the LED status lights. If the Powerbank is entirely charged, the LED status lights remain illuminated. The required char-ging time of the Powerbank depends on the selected charging source and the output power.
Normal charging:
Use a standard USB power supply or a port with USB on a computer to charge the Powerbank via the USB-C Out/In port (maximum 5V-3A = maximum 15 watts).

Fast charging:
To charge the Powerbank with a maximum power (18 watts), please use a power supply unit supporting the Power Delivery Standard (PD). The fast charging is indicated by an LED as well which now lights up blue.
If the LED does not change from white to blue, your power supply unit or the cable used are incompatible with the PD standard and the Powerbank will be charged normally.
b) Charging devices with the Powerbank
Wireless charging:
Activate the wireless charging function by pressing the On/Off button on the Powerbank. Now place your Qi-capable device centrally across the wireless charging area. The charging process starts automatically. If this is not the case, please check whether

• the Powerbank is adequately charged. For this purpose, at least one of the status LEDs must be per-manently lit.
• a foreign body is located between the devices.
• your device is Qi-capable.
• where the correct position for wireless charging is located on your device. You may possibly have to place it in another position.

The activated wireless charging process will be displayed by an orange LED.
The positioned device will be charged with a maximum of 10 watts. The amount of watt which are actually transferred depends on the charged device. If another device is charged through a cable, the maximum power will be reduced to 5 watts.
In order to end the charging process, you just have to remove your device from the Powerbank.
The ambient temperature level influences the charging speed, since the charging control of most mobile devices reduces the power consumption when reaching higher temperatures.
Wired charging:
This Powerbank is equipped with two USB-A ports (USB-A 1 Out/USB-A 2 Out) and a port USB-C (USB-C Out/In).
The two USB-A ports support the Qualcomm Quick Charge (QC) 3.0 standard (normal output: 5V-3A max.;
Output QC: 5V-3A, 9V-2A, 12V-1.5A = max. 18 Watt). The connection USB-C supports the Power Delivery
(PD) standard (normal output: 5V-3A max.; PD output: 5V-3A, 9V-2A, 12V-1.5A = max. 18 Watt) as well as the above-described QC standard.
You can charge several devices at the same time with the Powerbank as well, for example a tablet on the out port USB-A 1 and a smartphone on the Out/in port of USB-C or without wire through the Qi area. In this case, please note that neither the QC nor the PD standard are available, but a maximum of 5V with a total of maximum 15 watts (maximum 5 watts wireless) can be reached.
To charge your device, just connect the supplied cable to the connection USB-C (USB-C Out/ In) of the Powerbank and the other end to the connection USB-C of the device to be charged.
In alternative, connect your own cable to the port USB-A (USB-A 1 Out/USB-A 2 Out) or the port USB-C (USB-C Out/In) of the power bank and the other end to the device to be charged, according to the cable type. The charging process starts automatically and the devices independently determine the respective charging current. If the charging process does not start automatically, please activate the functional key.
The fast charging is indicated by an LED as well which now lights up blue. If the LED does not change from white to blue, your connected device or the cable used are incompatible with the PD standard and the power bank will be charged normally.

If a device is charged with the Powerbank and the capacity of the Powerbank is almost exhausted, this is signalled by blinking of the last status LED. Please re-charge the Powerbank.
Please note that while charging a device with a Powerbank, about 30% of the total capacity is used up just through the charging process. This is due, for example, through the loss of power from circuit warmth and voltage conversion.
The Powerbank has to be used regularly for optimum performance. If this is not the case, charge the Power-bank fully at least every three months.
Make sure that the warmth created through the charging process can be emitted from the device (ideally place the Powerbank on a firm and heat-resistant base while in use).

SERVICE / DISTRIBUTOR

INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta

Email (technical support): support@intenso-international.de
Email (RMA number): rma@intenso-international.de
Internet: www.intenso.eu
Telephone (technical support): +49 (0) 4441 – 999 111 (Mon. – Thur. 09:00 – 16:30; Fri. 09:00 – 14:00)

DISPOSAL

| Disposal of old batteries:
The devices marked with this symbol are subject to the European Directive 2006/66/EC All old batteries must be disposed of separate from the municipal waste stream via desig-nated collection facilities appointed by the government or the local authorities You avoid environmental damage with the proper disposal.
---|---
**| Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European Directive 2012/19/ EC. All electrical appliances and old electrical appliances must be disposed of separate from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. You avoid environmental damage with the proper disposal of old electrical equipment.
**| Packaging:
Packaging is raw material. The packaging material of this product is suitable for recycling and can be re-used. Please pay attention to the local recycling provisions when disposing of any materials.

OPERATING CONDITIONS

Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85% (for a short time). If you do not use your device for a longer period, store it at between -10 and 45 degrees Celsius at max. 90 % relative humidity (for a short time) and charge this every three months to maintain full capacity.

TECHNICAL DATA

Power Delivery: 5V- 3A, 9V- 2A, 12V- 1,5A
Charging current delivery (Output):| USB-A: 5V- 3A total (each 2.4 max.)
USB-A QC: 9V-2A, 12V-1.5A
USB-C: 5V- 3A max.
USB-C QC/PD: 9V- 2A, 12V-1.5A
Qi Version:| 1.2.4
Frequency band:| 125.8 – 129.49 kHz
Max. rediated power:| 10 watt
Internal battery:| 10000 mAh / 3.7V lithium polymer akku
Status display:| 4 LED lights
Integrated overcharge protection / discharge protection / overvoltage protection / short circuit fuse:| Yes
Overheat protection:| Yes
Forein object detection:| Yes
Cover-friendly:| Yes (depending from cover material and thickness. Maximum 5mm and no metal.)
Standby time:| Up to 3 months

References

• international.de - This website is for sale! - Hotels Resources and Information.
• Intenso | for everyday life
• Intenso – for everyday life - Intenso
• Intenso - for everyday life - Intenso

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>