Intenso XC10000 Powerbank Black Plus USB-A User Manual

May 15, 2024
Intenso

POWERBANK
XC10000
User Manual

Intenso XC10000 Powerbank Black Plus USB A - Cover

Version 2.0 (22/12)

XC10000 Powerbank Black Plus USB-A

Please read this manual carefully and observe and follow all the instructions mentioned in it to ensure a long service life and reliable use of the device. Keep this manual handy and pass it on to other users of the device.

OPERATING INSTRUCTION

SAFETY

Intended use
This Powerbank is intended exclusively for the power supply of devices with an operating voltage of 5V direct current (mobile phones, MP3 player, etc.) Another use, or one going beyond this, is deemed as not intended and can lead to damages and injuries. This product is not intended for commercial use or for medical and special applications, where the failure of the product can cause injuries, mortalities or considerable material damages. In the case of use which does not correspond to the intended use, the liability expires. The opening as well as conversion of the device and the use of additional devices and accessories, which are not approved by us, must be refrained from. Do not use the device under extreme environmental conditions and observe the safety instructions. Non- observance of the information and safety instructions in these Instructions is deemed as non-observance of the intended use and leads to expiry of the liability and can lead to personal or material damages.
The firmware and/or hardware may be changed at any time without prior notice. For this reason it is possible that parts of these instructions, technical data and images in this documentation differ slightly from the product in your possession. All points described in these instructions only serve the purpose of clarification and must not inevitably correspond to a certain situation. Legal claims cannot be made on the basis of these instructions.

Safety instructions
Dangers for children and persons with restricted physical, sensory or mental abilities:
Children often underestimate dangers or do not recognize them at all. This device is not intended to be used by persons (including children) with restricted sensory, physical or mental abilities or lack of experience and/or knowledge, unless they are supervised by a person responsible for their safety or received instructions from the person on how to use the device and they have understood the resultant dangers. Unsupervised children should not have access to the device. Make sure that children do not play with the device.

Danger of asphyxiation!
Children can put the packaging film or small parts in their mouths and choke on them.

Risk of short circuit!
To avoid injury, do not operate this appliance with wet hands. Do not insert any items, which are not intended for its use, into the openings of the device. This could lead to an electrical short-circuit and a resultant fire. Do not use the device if there is visible damage to the device itself or to the USB cable, as this may result in injury or damage. The device may not be exposed to spray or dripping water. Do not place containers filled with liquids (vases, glasses, etc.) on the device or in its immediate vicinity. There is a risk that the container will tip over and the liquid will affect the electrical safety.

Tripping hazard!
When positioning the device, pay attention that no one can tread on the cable or trip over it. Do not place any objects onto the cable.

Damage!
Do not use the device in extremely cold, hot, humid or dusty areas. Do not subject it to direct sunlight. Protect the product from open fire. There is danger of explosion! Protect the device in every operating state against impact and falling. This device is sensitive to electrostatic discharge. Therefore protect the device against every possible electrostatic discharge. To avoid malfunctions, do not connect the USB output ports of the device with USB ports of computers or other devices. They are only intended for charging devices. To avoid overheating, do not block or cover the openings of the product. Do not cover the product completely during operation to ensure heat dissipation. Do not open the housing of the device and do not disassemble it into its component parts. Do not try to repair it yourself. The guarantee expires in this case.

WARNING! Hot surface!
Holding the device for longer periods when in use can result in the surface becoming hot, causing skin injuries. When using the device, avoid holding it for too long, especially in areas which become very hot. Do not carry the device directly on your body. The device can be touched for longer periods after it has cooled down.

Declaration of conformity
The CE marking says that this product meets the requirements of all EU Directives applicable for this product.
The UKCA marking says, that this product meets the requirements of all UK Directives applicable for this product.

SCOPE OF DELIVERY

  1. Intenso Powerbank XC10000
  2. USB-A to USB-C charging cable
  3. Operating instruction

Please check whether the contents of the packaging (see also graphic at the beginning of the manual on page 2) are complete and undamaged. If this is not the case, please contact the seller or our service department: rma@intenso- international.de

USE

Device overview

Intenso XC10000 Powerbank Black Plus USB A - USE 1

  1. Function key (ON/OFF)
  2. Status LEDs
  3. USB-A Out
  4. USB-C In
  5. USB-C Out

Operation
Function key (On/Off)
If the charging process does not start automatically, you can start it manually by briefly pressing the function key. You can stop the charging process and deactivate the Powerbank by briefly pressing the key twice.

LED Status display
If no device is connected to the Powerbank, or the connected device is fully charged, the Powerbank changes automatically into standby mode after a time interval of approx. 30 seconds.

| LED light
---|---
%  – Energy| LED 1| LED 2| LED 3| LED 4
1 %  – 25 %| | | |
26 %  – 50%| | | |
51 %  – 75%| | | |
76 % – 100%| | | |

Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB-C cable with the USB-C connection (USB-C In) of the Powerbank and connect the other end of the USB cable with a standard USB-A connection of a computer or USB adapter. The charging process and the current charge status is signalled via the LED status lights. When the Powerbank is fully charged, the LED status lights are permanently on. The required charging time of the Powerbank is dependent on the selected charging source and its output (max. 5V / 3A).
b) Charging devices with the Powerbank
This Powerbank has an USB-A port (USB-A OUT- Output 2.4A) and an integrated USB cable with USB-C plug (USB-C OUT- Output 3A).
There are two options of charging a device via the Powerbank:

  • Option 1: Connect the USB-C port (USB-C OUT) of the integrated cable with the USB-C port of the device to be charged. The charging procedure starts automatically.
  • Option 2: Connect the supplied USB cable with the USB-A port (USB-A OUT) on the Powerbank and the other end of the USB cable with the USB-C port of the device to be charged.

You can charge two devices simultaneously with the Powerbank, for example, a Tablet at the USB-A (USB-A OUT) port and a Smartphone via the integrated cable with USB-C plug (USB-C OUT).
Of course you can also use your own USB charging cable to connect the Powerbank with your device.
If a device is charged with the Powerbank and the capacity of the Powerbank is almost exhausted, this is signalled by blinking of the last status LED. Please re-charge the Powerbank.
Please note that while charging a device with a Powerbank, about 30% of the total capacity is used up just through the charging process. This is due, for example, through the loss of power from circuit warmth and voltage conversion.
The Powerbank has to be used regularly for optimum performance. If this is not the case, charge the Powerbank fully at least every three months.
Make sure that the warmth created through the charging process can be emitted from the device (ideally place the Powerbank on a firm and heat-resistant base while in use).

SERVICE / DISTRIBUTOR

INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta

Email (technical support):| support@intenso-international.de
---|---
Email (RMA number):| rma@intenso-international.de
Internet:| www.intenso.eu
Telephone (technical support):| +49 (0) 4441 ­ 999 111 (Mon. ­ Thur. 09:00 ­ 16:30; Fri. 09:00 ­ 14:00)

DISPOSAL

Disposal of old batteries: The devices marked with this symbol are subject to the European Directive 2006/66/EC All old batteries must be disposed of separate from the municipal waste stream via designated collection facilities appointed by the government or the local authorities You avoid environmental damage with the proper disposal.
Disposal of old electronic equipment: The devices marked with this symbol are subject to the European Directive 2012/19/ EC. All electrical appliances and old electrical appliances must be disposed of separate from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. You avoid environmental damage with the proper disposal of old electrical equipment.
Packaging: Packaging is raw material. The packaging material of this product is suitable for recycling and can be re-used. Please pay attention to the local recycling provisions when disposing of any materials.

OPERATING CONDITIONS

Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85% (for a short time). If you do not use your device for a longer period, store it at between-10 and 45 degrees Celsius at max. 90 % relative humidity (for a short time) and charge this every three months to maintain full capacity.

TECHNICAL DATA

Dimensions: 102 x 65 x 23 mm
Power consumption (Input): 5V – 3A
Charging current delivery (Output): USB-A Out: 5V – 2.4A

USB-C Out: 5V- 3A
Total: max. 5V – 3A
Internal battery:| 10000 mAh / 3.7 V Lithium polymer battery
Status display:| 4 LED lights
Integrated overcharge protection /discharge protec- tion / overvoltage protection / short circuit fuse:| Yes
Simultaneous charging of the Powerbank and
charging of a connected device:| Yes
Standby time:| Up to 3 months

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals