INKEE GC12 Flexible Photography LED Video Air Light User Guide
- June 1, 2024
- INKEE
Table of Contents
INKEE GC12 Flexible Photography LED Video Air Light
Product Information
Specifications
- Product Name: GOLD CROW 12 Airbag Light
- Material: TPU
- Dimensions: 120mm x 600mm
- Color Temperature: 5600K
- Brightness: Adjustable
- Power: 16.7V
- Charging Port: Type-C
Product Usage Instructions
- Safety Tips: Please inflate the airbag before turning on the light.
- Initial Setup: Inflate the lamp first. After inflating, turn on the light.
- Charging: When using for the first time, complete a charge-discharge cycle. Discharge the battery completely and then fully charge it.
- Power On/Off: Long press the ON/OFF button for 1 second to turn on or off. Double-click the button to enter mode setting.
- Mode Selection: Use K+ and K- buttons to select different modes.
- Avoid Water Damage: The Type-C port is designed to prevent rainwater splashing. Ensure it stays dry during use.
- Avoid High Temperature Area: Do not touch the magnetic suction area while the product is working (area marked with High Temperature Caution).
Effect Mode Introduction
-
Strobe Mode: Description of strobe mode
functionality. -
Flash Mode: Description of flash mode
functionality.
Warranty Information
For warranty details and troubleshooting, refer to the warranty card included
with the product.
Remote Control and Mobile Phone Connection
Refer to the user manual for instructions on connecting the product to a
remote control or mobile phone.
Disclaimer
The GOLD CROW 12 Airbag Light is intended for specific usage as outlined in
the product manual. Please read all instructions carefully before use.
FAQ
-
Q: How do I adjust the brightness and color temperature?
A: Use the Color Temperature + Brightness buttons to adjust these settings. -
Q: What should I do if the light is not turning on?
A: Ensure that the airbag is properly inflated and try recharging the product.
Product Structure
Disclaimer
Gold crow12 is an airbag light made of TPU
- Before use, make sure the airbag is filled with air before turning on the light. If you turn on the light directly without filling it with air, high temperature will occur and may cause damage to the airbag.
- Avoid contact with sharp objects, corrosive liquids and high-temperature substances during use, which may cause damage to the air bag.
- Although Gold Crow12 is an airbag light body, please try to avoid squeezing and falling from high altitude, which may also cause damage to the airbag.
The above damages are outside our company’s warranty, and our company has nothing to do with the secondary injuries and losses caused by this.
Product Use
Safety Tips
- Please inflate the air before turning on the light.
- When using it for the first time, please complete a charge-discharge cycle, that is, discharge it completely until the battery is exhausted and then fully charge it.
- The Type-C port prevents rainwater from splashing in.
- When this product is working, do not touch the magnetic suction area (i.e. the area with the “High Temperature Caution” mark).
Effect Mode Introduction
Warranty Card
Shenzhen Yingzhiqi Technology Co., Ltd
Room 705, Building 8, Area 41, No. 31, Jia’an Road, Haile Community, Xin’an
Street, Bao’an District, Shenzhen
Tel: +86 40096 80096 86 18928447616
URL: www.in-kee.com
Shenzhen Yingzhiqi Technology Co.,Ltd
Inspection: qualified.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>