INKEE GC30 Three Legged Crow Film and Television Light User Guide
- June 13, 2024
- INKEE
Table of Contents
INKEE GC30 Three Legged Crow Film and Television Light User Guide
Read Before Using
Note: This manual uses Bi-color as an example!
Product Structure
Safety Tips
- In order to avoid accidental touch and slide switch when not using this product, it is recommended to enter the transport mode when not using this product.
- When using for the first time, please complete a charging and discharging cycle, that is, fully discharge until the battery is exhausted, and then fully charge it!
- The Type-C port should be protected from rainwater splashing.
- When this product is working, do not look directly at the COB lamp bead; do not cover the lamp head with objects; do not touch the COB lamp bead under any circumstances.
- There must be no shields on the ventilation holes, so as not to affect heat dissipation and cause equipment damage.
Transport Mode
-
When using this product for the first time, please exit the transportation mode first: Rotate the control ring to activate the screen, and the transportation mode interface will be displayed ①， Next, you need to continuously rotate the control ring clockwise several times ② until the progress bar at the top of the screen is full③. Enter the main menu and successfully exit the transport mode.④
-
Enter the transportation mode: When the machine is locked①, continuously rotate the control ring ② counterclockwise until the green progress bar at the top of the screen is full③, and the green airplane icon appears④, which means entering the transportation mode.
Product Use
-
Rotate the control ring in either direction to activate the screen
-
After activation, quickly rotate clockwise to unlock; (When the brightness is 0%, quickly turn counterclockwise the control ring to lock, and wait 10 seconds to enter shutdown
-
Turn clockwise to increase brightness after unlocking
-
Turn counterclockwise to decrease brightness
-
Each turn of the control ring adjusts the brightness by 1%, and quickly turns the control ring to adjust the brightness by marked as turned one frame
-
Turn half a block clockwise and hold on for 2 seconds to enter the color temperature adjustment
-
Turn half a block counterclockwise without letting go and hold on for 2 seconds to enter the mode adjustment(rotate the control ring while maintaining this interface to select the mode
Effect Mode Introduction
Constant light mode
Light stays on|
Bad TV Mode
The lights go into a simulated bad TV state, Random irregular brightness
variations|
Bad Bulb Mode
Simulate the flickering of a damaged light bulb, flickering at random and high
frequency.
---|---|---
Flashing Mode
The more star icons, the faster the blinking, The less the star icon blinks,
the slower it will be. Blinking is random|
Lightning Mode
The light enters the lightning state, the more lightning icons, the denser the
lightning speed, the fewer the lightning icons, the longer the flashing
interval, and the lightning is triggered randomly|
SOS Mode
The light enters the state of SOS distress flashing, three short, three long
and three short international distress lights.
Warranty Card
Shenzhen Yingzhiqi Technology Co.,Ltd
Room 705, Building 8, Area 41, No. 31, Jia’an Road, Haile Community, Xin’an
Street, Bao’an District, Shenzhen
Tel:+864009680096
86 18928447616
URL: www.in-kee.com
Shenzhen Yingzhiqi Technology Co.,Ltd Inspection: qualified