INKEE GoPro Series Falcon Plus Gimbal Stabilizer User Guide
- June 15, 2024
- INKEE
Table of Contents
INKEE GoPro Series Falcon Plus Gimbal Stabilizer
Left and right Balance adjustment steps
-
Check the center of gravity of the camera. If the camera is tilted to the left, it means that the center of gravity of the camera is biased to the left, and the balance need to be adjusted.
-
Losen the left and right balance adjustment locking screws and move the mounting base and camera to the right.
-
Keep it level with the ground when it is still, tighten the screws, and the left and right balance is adjusted.
Front and rear balance adjustment steps
Check the center of gravity of the camera.
-
if the camera lens is tilted forward, it means that the center of gravity of the camera is forward , and the balance needs to be adjusted.
-
Loosen the screws and move the mounting base3 and camera forward.
-
Keep it level with the ground when it is still, then tighten the screws, and the front and rear balance adjustment is completed.
Note: Try to keep th camera and tilt motor in a straight line.
Move the lens up until it is no the same level as the tilt motor, and the leveling is completed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>