JDTDC JDA01 JD Finder User Manual

JDTDC JDA01 JD Finder

Product specifications

• MODEL: JDA01
• Battery: CR2032
• Bluetooth version: BLE 5.1
• Compatibility: Compatible with Apple devices only; iPhone and iPod touch models with iOS 15.0 or later; iPad models with iPad OS 15.0 or later; iMac and MacBook with macOS 11 or later

Packing

1. JD Finder
2. Instruction manual

Product setup

1. You need an iPhone,iPad, or iPod touch with iOS 15.0 or iPad 15.0 or later and Apple-ID two-factor authentication turned on
2. Tum on Bluetooth on your Apple device, and go to Settings→ Privacy→ Turn on Location Services, then scroll down and tap Find MMe to allow location access ss, and turn on Precise Location.
3. Open the Find My app, then select the Items tab.
4. Click Add Item and then click Add Other Items.
5. After finding the item, press Connect and follow the onscreen instructions until the setup is successful

Setup the Lost mode

1. When the tracker is a certain distance away from the host device, to mark an item as lost, you need to turn on Lost Mode.
2. Tap items at the bottom of the screen, then tap the name of the lost item. 4.3.Below Lost Mode, tap Enable.
3. Follow the onscreen instructions to enter a phone number where you can be reached.
4. Make sure you allow notifications for the Find My app.

See your Tracker on the map

1. Open the Find My app, then tap the Items Tab.
2. Choose the tracker you want to locate in the Items List.
3. If the tracker is within range of your device or the Find My network has recently detected it, you will see it on the map. An updated location and timestamp will appear under its name.
4. If the tracker isn’t within range of your device or any devices in the Find My network, you will see its last known location and timestamp. To be notified when your tracker is within range of your device or detected by the Find My network, turn on Notify When Found under Notifications

Play a sound

1. Open the Find My app on your iPhone, iPad, or iPod touch, then tap the Items Tab.
2. In the items list, choose the tracker that you want to play a sound.
3. Tap Play Sound. If your tracker is within Bluetooth range, it will play a sound.
4. To stop this sound before it ends automatically, tap Stop Sound.

Anti-stalking

1. If any tracker and other Find My network accessory products leave their owners and move with you for some time, you will receive a notification to your Apple device through the Find My app and be able to observe the route and duration.
2. These features are purpose-built to prevent unknowing attempts to track you, and if you feel your safety has been threatened, please contact local law enforcement*.
   • This product include features to guard against unwanted tracking. They should not be used to track people, and should not be used to track property that does not belong to you. Using these products to track people without their consent is a crime in many countries and regions around the world.

Replacing the battery

1. Open the battery cover from the top opening
2. Remove the old battery and replace it with a new CR2032 3V battery, with the positive electrode facing upwards. After the battery is successfully installed, a prompt sound will sound
3. Cover the battery cover

Key functions

1. Turn on the battery, open the battery cover, and click the On/Off button to turn on the device
2. Shut down, press and hold the button for 10 seconds to shut down
3. Reset function, quickly and continuously press the button 5 times, and the 5th time requires a long press for 5 seconds to complete the reset
4. If the tracker is not working properly, please make sure the product is ready for setup, remove and replace the battery， bring JD Finder closer to the device you want to connect to, or reset the product before trying to connect JD

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Warranty & Contact US

1. Warranty All of our Products are covered by an 18-month Limited warranty from the original purchase date. If any questions, please contact our after-sales support team, we will be standing by to help!

Contact US

• Email: doralin147@gmail.com
• service@szjdtech.com
• Website: www.jdtdc.com
• For operation videos, please visit
• YouTube: Dora JDTDC

Specifications

• Model: JDA01
• Battery: CR2032
• Bluetooth version: BLE 5.1
• Compatibility: Compatible with Apple devices only; iPhone and iPod touch models with iOS 15.0 or later; iPad models with iPad OS 15.0 or later; iMac and MacBook with macOS 11 or later

FAQ

Q: Can I use JD Finder with Android devices?
A: No, JD Finder is only compatible with Apple devices as per product specifications.

Q: What should I do if my tracker stops working?
A: Try replacing the battery following the provided instructions. If issues persist, contact customer support for further assistance.

Q: Is tracking individuals without consent legal?
A: No, tracking individuals without their consent is illegal in many countries and regions. The product is designed for item tracking purposes only.

References

• SZJDTech.com | Future Network for Today

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>