PHILIPS RC048B LED32S LED Light Instructions
- June 1, 2024
- Philips
Table of Contents
PHILIPS RC048B LED32S LED Light
Specifications:
- Light source engine type: LED
- Luminous Flux: 3,200 lm
- Correlated Color Temperature: 4000 K
- Luminous Efficacy: 88 lm/W
- Color rendering index (CRI): >80
- Operating Voltage: 220-240 V
- Power Consumption: 36 W
- Power Factor: 0.9
- Dimensions: 34 x 295 x 1195 mm
- Ingress protection code: IP20 [Finger-protected]
- Mech. impact protection code: IK02 [0.2 J standard]
- Safety class: II
Product Usage Instructions
Installation:
- Ensure the power supply is switched off before installation.
- Mount the SmartBright Direct Panel G2 securely on the ceiling using appropriate fixtures.
- Connect the panel to the power source following the electrical specifications provided.
- Verify the panel is properly installed and secure before turning on the power.
Operation :
- The SmartBright Direct Panel G2 operates at an input voltage of 220-240V and consumes 36W of power.
- The panel emits a neutral white light with a color temperature of 4000K, suitable for everyday ceiling lighting.
- The luminous flux can be controlled by connecting the panel to a compatible dimmer switch.
Maintenance:
- Regularly clean the panel using a soft, dry cloth to remove dust and dirt buildup.
- Avoid using harsh chemicals or abrasive materials that may damage the optical cover.
- If the panel malfunctions or shows signs of damage, contact a qualified technician for repair or replacement.
FAQ :
-
Q: Is the SmartBright Direct Panel G2 dimmable?
A: No, the SmartBright Direct Panel G2 is not dimmable. -
Q: What is the power consumption tolerance of the panel?
A: The power consumption tolerance of the panel is +/-10%. -
Q: What is the ambient temperature range for operating the panel?
A: The ambient temperature range for operating the panel is not specified in the manual. It is recommended to operate within normal room temperature ranges for optimal performance.
SmartBright Direct Panel G2
RC048B LED32S/840 PSU W30L120 NOC CFW
SmartBright Direct Panel G2, 88 lm/W, 840 neutral white
The new Philips Smartbright Direct panel offers exceptional value. It is
Perfect for your everyday ceiling lighting installations. It is available in 2
standard sizes and 2 different CCT options to suit your need.
Product data
Product data|
---|---
General Information| | | Power Factor (Fraction)| 0.9
Light source engine type| LED| | Number of products
on MCB of 16 A type B| 15
CE mark| CE mark| | |
Flammability mark| For mounting on normally flammable| |
Temperature|
| surfaces| | Ambient temperature range| -10 to +35 °C
| | | |
Light Technical| | | Controls and Dimming|
Luminous Flux| 3,200 lm| | Dimmable| No
Correlated Color Temperature (Nom)| 4000 K| | Control
interface| –
Luminous Efficacy (rated) (Nom)| 88 lm/W| | |
Color rendering index (CRI)| >80| | Mechanical and
Housing|
Light source color| 840 neutral white| | Housing
Material| Steel
Optical cover type| Acrylate| | Optical cover
material| Polystyrene
| | | Housing Color| White RAL 9003
Operating and Electrical| | | Optical cover finish|
Opal
Input Voltage| 220 to 240 V| | Overall length| 1,195 mm
Line Frequency| 50 or 60 Hz| | Overall width| 295 mm
Inrush current| 22 A| | Overall height| 34 mm
Power Consumption| 36 W| | Effective projected area|
0.353 m²
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
- www.lighting.philips.com
- 2024, March 25 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>