Boboli OLAR3 Walkable LED Recessed Outdoor Spotlight Instruction Manual

Table of Contents

Boboli-OLAR3-Walkable-LED-Recessed-Outdoor-Spotlight-
PRODUCT

Specifications

Safety Guidelines

Assembly and maintenance should only be done by specialized personnel.
Ensure the power network is not under tension before assembly.
Follow instructions carefully for safe and proper operation.
Use only original spare parts for repairs or maintenance.
Avoid pulling the power cord or lifting the appliance by it.
Avoid contact with chemical agents or using pressure washers for cleaning.
Maintain a minimum safety distance to prevent glare when activating the light source.
Power supply connections must comply with IEC/EN 60598-1.
Installer must ensure IP protection degree of connection cables with appropriate terminal blocks and connectors.
Installation should be done professionally to ensure proper functioning.

Q: Can I clean the product with a pressure washer?

A: No, it is advised not to use a pressure washer to clean the product as it may cause damage.

Q: What should I do if I need repairs?

A: Use only original spare parts for any repairs and contact the supplier for assistance.

Q: Can I modify the product?

A: The manufacturer does not recognize warranty in case of modifications or tampering with the product, so it is advised not to modify it.

Q: How should I ensure IP protection degree of connection cables?

A: The installer must guarantee the IP protection degree by using appropriate terminal blocks and connectors during installation.

Boboli-OLAR3-Walkable-LED-Recessed-Outdoor-Spotlight-
PRODUCT

Assembly and maintenance can only be carried out by specialized personnel.
Before proceeding with assembly, check that the network is not under tension.
Follow the instructions carefully to ensure correct and safe operation.
Use only original spare parts for any repairs or maintenance.
Do not pull the power cord or lift the appliance by it.
The manufacturer does not guarantee for damages resulting from improper assembly or use.
For any problems contact the supplier.
Do not use a pressure washer to clean the product.
No part of the appliance must come into contact with chemical agents. Contact the manufacturer for compatibility checks.
The manufacturer will not recognize the warranty in case of modifications or tampering with the product.
Installation must be carried out in a workmanlike way.
Maintain a minimum safety distance before activate the light source, in order to prevent any glare.
Power supply connections in the final application must comply with IEC/EN 60598-1.
The installer must guarantee the IP protection degree of the connection cables by using adequate terminal blocks and adequate connectors. The IP rating of the final cable connection must be guaranteed by the installer.