Boboli OLAR1 Recessed LED Walkable Outdoor Spotlight Instruction Manual
- June 1, 2024
- Boboli
Table of Contents
Boboli OLAR1 Recessed LED Walkable Outdoor Spotlight
Product Information
Specifications
- Date: 22.01.2024
- Model: OLAR1
- RoHS Compliant
Product Usage Instructions
Connection
- Ensure assembly and maintenance are performed by specialized personnel only.
- Before assembly, verify that the network is not under tension.
- Follow instructions carefully for correct and safe operation.
- Use only original spare parts for repairs or maintenance.
- Avoid pulling the power cord or lifting the appliance by it.
Safety Notes
- Avoid damages resulting from improper assembly or use.
- Contact the supplier for any problems.
- Avoid using a pressure washer to clean the product.
- Avoid contact of any part with chemical agents; check compatibility with the manufacturer.
- Manufacturer’s warranty void in case of modifications or tampering.
- Installation must be carried out in a workmanlike manner.
- Maintain a minimum safety distance before activating the light source to prevent glare.
- Power supply connections must comply with IEC/EN 60598-1.
- The installer must ensure IP protection degree of connection cables using appropriate terminal blocks and connectors.
Links
Contact Information
For further assistance or inquiries, please visit www.boboliluce.it.
FAQ
Q: Can I clean the product with a pressure washer?
A: No, it is advised not to use a pressure washer to clean the product as it may cause damage.
Q: What should I do if I encounter any issues with the product?
A: Contact the supplier for any problems or inquiries regarding the product.
PRODUCT OVERVIEW
GENERAL SAFETY NOTES
- Assembly and maintenance can only be carried out by specialized personnel.
- Before proceeding with assembly, check that the network is not under tension.
- Follow the instructions carefully to ensure correct and safe operation.
- Use only original spare parts for any repairs or maintenance.
- Do not pull the power cord or lift the appliance by it.
- The manufacturer does not guarantee for damages resulting from improper assembly or use.
- For any problems contact the supplier.
- Do not use a pressure washer to clean the product.
- No part of the appliance must come into contact with chemical agents. Contact the manufacturer for compatibility checks.
- The manufacturer will not recognize the warranty in case of modifications or tampering with the product.
- Installation must be carried out in a workmanlike way.
- Maintain a minimum safety distance before activate the light source, in order to prevent any glare.
- Power supply connections in the final application must comply with IEC/EN 60598-1.
- The installer must guarantee the IP protection degree of the connection cables by using adequate terminal blocks and adequate connectors. The IP rating of the final cable connection must be guaranteed by the installer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>