Steinigke TMH-H90 Hybrid Moving Head Spot User Manual
- June 1, 2024
- Steinigke
Table of Contents
Steinigke TMH-H90 Hybrid Moving Head Spot User Manual
★Please read these instructions carefully before installing and using the product★
Before using the product for the first time
- Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to operate a damaged fixture.
- Package:
3. Check that the voltage and frequency of the local power source match the
mains power requirements of the fixture.
4. Operate the fixture in accordance with the procedures described in this
manual.
5. The fixture needs to be installed in a well-ventilated area.
6. Verify the weight bearing of the fixture before its suspended.
7. Turn off the power when you do any installation, maintenance, or cleaning
work for the fixture.
Specification
- Volate：AC110-240V 50Hz
- Power comsuption: 100W
- Light source for Gobo: LED 60W, 11000K
- Light source for Wash: LED 6 x 10W RGBW
- Connector: RJ45 In/Out
- Control option: Auto,Sound, DMX512 (16CH/12CH), Master/Slave
- Prism: 6-Facet rotating prism
- Color wheel: 7 + 1
- Gobo wheel: 7 + 1
- X axis: 540°, * Y axis: 180°
- NW: 3.75KG
- Dimension: 205205341mm
- Installation methods: Hanging on truss, Surface, Conceal mounted (Hole-cutting diameter: 235mm, Hole-cutting depth: ≥ 120mm)
-
- Notice: When the device is in an abnormal situation, “ERRO” is displayed and the keys are locked ( when the LEDs temperature is >75℃).
Fixture Overview:
Installation Intruction:
Note: The following instructions are only for the optional recessed mounting method. The flat head self-tapping screws need to be prepared by the user, and the length depends on the installation situation.
DMX Channel Instruction
DMX 19 Channel
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>