KING S RACK GT0918 Storage Bin Rack System

Product Information

This product is a Bin Rack designed to provide storage space for bins. It consists of various components including upper and lower posts, post connectors, hex key, nuts, screws, plastic caps, particle board, short beams, rails, long beams, U shape beams, mini long beams, and bins.

Components

• Upper post x 4 (Longer post)
• Lower post x 4 (Shorter post)
• Post Connector x 4
• Hex key x 1
• Nut x 16
• Screw x 16
• Plastic cap x 4
• Particle board x 1
• Short beam x 4
• Rail x 48
• Long beam x 2
• U shape beam x 2
• Mini long beam x 14
• Bin x 24

Product Usage Instructions

• Step 1: Connect the upper and lower posts
  Take the longer upper post and the shorter lower post. Connect them using the post connectors. Use the hex key to secure the connectors in place. Repeat this process for all four sets of posts.

• Step 2: Set up a Rectangle
  Assemble two posts with two short beams to create a rectangle shape. Place one beam at the top and another at the bottom. Insert the rivets into the posts and tap them to seat the rivets.

• Step 3: Finish the framework
  Mount two U shape beams to the rectangle. The front U shape beam should head up and mount to the #2 and #3 holes. The rear U shape beam should head down and mount to the #1 and #2 holes. Place two posts at the other ends of the U shape beams. Connect the two posts by placing one short beam at the bottom and another at the top. Connect the two rectangles with two long beams at the top.

• Step 4: Set up the layers
  Add mini long beams to the posts in parallel at the #7, #12, #17, #22, #27,

  32, and #37 holes from the top. Leave a space of 4 holes for each tier for

  the bins. Ensure that the V shape slot is heading down at the front and heading up at the back.

• Step 5: Mount the rails
  Mount the rails to the mini beams accordingly.

• Step 6: Put the bins on the rails
  Place the bins on the rails. There are a total of 48 rails available.

• Step 7: Place the wooden board on top
  Finish by placing the provided wooden board on top of the bin rack.

Now, the system is ready for use. You can start organizing your items in the bins and utilize the storage space efficiently.

Tools Required

Thank you for choosing King’s Rack.
We work to help you organize things better.

Kindly notice

• Make sure the slots of the posts are pointing down and the ledge of the braces are heading up.
• Experiment proves that interference fit (tight fit) improves the sturdiness of the rack. So the rivets don’t have to fully seat into the slot. 1 or 2mm gap at the bottom of the slot is acceptable.
• Use a mallet to let the rivet seal to the slot.

Assembly Instructions

1. Step 1
   Connect the upper posts and the lower posts with post connectors.

   • The upper post is the longer one while the lower post is the shorter one.

2. Step 2
   Set up a “Rectangle” by assembling 2 posts with 2 short beams.

   • One beam at the top & another at the bottom.
   • Place the rivets into the posts.
   • Tap to seat the rivets.

3. Step 3
   Finish the framework.

   • Mount 2 “U” shape beams to the ” Rectangle”. Front “U” shape beam heading up to mount to the #2  #3 hole. Rear “U” heading down to mount to the #1 & #2 hole.
   • Place 2 posts to the other ends of the “U” shape beams.
   • Connect the 2 posts by placing 1 short beam at the bottom & another at the top.
   • Connect the 2 “Rectangle’s with 2 long beams at the top.
     

4. Step 4: Set up the layers.

   • Add the mini long beams to the post in parallel, at the #7, #12,#17, #22,#27,#32 & #37 hole from the top.
   • Leaving the space of 4 holes each tier for the bins.
   • Let the “V” shape slot heading down at the front while heading up at the back.

5. Step 5

   • Mount the rails to the mini beams accordingly.

6. Step 6

   • Put the bins on the rails.

7. Step 7

   • Place the wooden board on the top.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>