hama 176545 WiFi Ceiling Light Instruction Manual

00
176545

WiFi Ceiling Light

WiFi-Deckenleuchte

Link to App

http://de.hama.com/qrc-smarthome-app?qr=bda

de.hama.com/smarthome#smart-solution

Operating instruction

1. Explanation of product marking symbols

| Identification of the connection point for the protective conductor for devices of protection class I Protection against electric shocks through protective conductor terminal
---|---
| The product must be used only with alternating current.
| Please note the following: Risk of electric shock on contact

Safety Notes

•  Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep this product, as all electrical products, out of the reach of children!
• The product may only be operated with the type of power supply the network described on the nameplate.
• Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas, or other lines running through the wall at the mounting site.
• The product is intended for indoor use only.
•  Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not continue to operate the device if it becomes visibly damaged.
• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.

Mounting

• Switch off the fuse (fuse box) that corresponds to the room in which you want to install the lamp. Verify that the wires are dead using a suitable measuring device (for example, multimeter).
•  Pull the supplied cable protection conduits over the wires on your ceiling (see Pic 1), and shorten the conduits accordingly.
• Remove the cover of the lamp by turning anti-clockwise.
• Pull the wires through the hole with the rubber insulation.
• Mount the lamp using the supplied screws and rawl plugs.
• Connect the wires to the terminal block of the lamp (see Pics 2 and 3).
• Put the cover back on the lamp.

It’s so simple:

•  Just download the app Hama Smart Solution from the Apple app store or the Google Play store
• Start the Hama Smart Solution app
• If you’re using it for the first time, you’ll have to register and create a new account. If you already have an account, log in using your login details
• The LED should start flashing quickly (if it does not, then switch it off and back on three times quickly).
• ow click + in the upper-right corner and select Lighting Devices.
•  Confirm that the lamp flashes quickly.
•  Now enter the name of your WiFi network and the password, and confirm with Confirm.
•  The lamp will now be connected. Once the connection has been established, the lamp stops flashing
•  Now you can set up, control, and configure your WiFi Smart LED lamp using the app

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Declaration of Conformity

Hereby, Hama GmbH &CoKGdeclares that the radio equipment type [00176545] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00176545 -> Downloads.

Technical data

Note
Detailed operating instructions are available at
www.hama.com

Warning

• The device may only be operated on an a230 V50HzACvoltage supply. Work with the 230 Vmains supply may only be carried out by electricians certified in your country. The applicable accident prevention regulations are to be observed.
•  To avoid an electric shock from the device, please disconnect the mains voltage (switch off circuit breaker). Failure to observe the installation instructions can cause fire or other hazards.

Risk of electric shock

• Do not open the product. Do not continue to operate the product if it is damaged, which may be indicated by smoke, odor or loud noises. Immediately contact your dealer or our service department (see item “Service and Support”).
• The light source of this light is not replaceable; when the light source has reached the end of its life, you need to replace the entire light.

Hama GmbH &CoKG
86652 Monheim /Germany

Service &Support
www.hama.com
+49 9091 502-0

“Google andGoogle Play are trademarks of Google LLC.” All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.00176545/07.20

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>