FRIGIDAIRE FHWW184WE2 Window Room Air Conditioner with Wi-Fi Instruction Manual

FRIGIDAIRE FHWW184WE2 Window Room Air Conditioner with Wi-Fi

Product Information

Specifications

• Model: Room Air Conditioner
• Mode: Eco mode, Auto Fan
• Timer: Up to 24 hours
• Filter: Dust Filter, PureAirTM Premium Allergen Filter (sold separately)
• Special Feature: Child Lock

Product Usage Instructions

Getting Started

Before starting, ensure the unit is installed according to the supplied Installation Instructions. Press the RESET button on the Current Device when plugging in the unit.

Control Settings

1. Set the Timer or Get Started: Press the On/Off button to start the unit in Eco mode. Adjust the temperature by pressing – or + buttons.
2. Change Mode: Press the Mode button to select the desired mode.
3. Adjust Fan Speed: Press the Fan button to increase fan speed. Auto Fan option is available for automatic adjustments based on room temperature changes.
4. Clean the Dust Filter: After 250 hours of use, clean the dust filter when the Dust Filter light illuminates. Press and hold the Fan button for 5 seconds to reset the light.
5. Go to Sleep: Press the Sleep button for a 7-hour elevated temperature setting.
6. Activate Child Lock: Press and hold the Mode button for 3 seconds to activate Child Lock. Press Sleep button for 5 seconds to deactivate.

PureAirTM Premium Allergen Filter

If you have the PureAirTM Premium Allergen Filter installed, enjoy fresher room air by capturing household dust, pet hair, smoke, and other particles. Press Sleep button for 5 seconds to reset the filter light.

FAQ

• Q: How do I change the temperature unit?
  • A: Press and hold the – and + buttons together for 3 seconds to switch the display temperature unit.
• Q: How do I cancel the timer setting?
  • A: Press and hold the Timer button for 2 seconds to cancel the timer setting.
• Q: What should I do when the PureAirTM Filter light illuminates red?
  • A: Replace the PureAirTM Premium Allergen Filter. Press Sleep button for 5 seconds to reset the light.

Before you start

Only install unit according to the supplied Installation Instructions When plugging unit in, always press the RESET button on the Current Device.

You’re in control

1. Get Started
   Press the On/Off button. That’s it! The unit is programmed to start in Eco mode, with auto fan speed and a temperature setting of 72°F. To change the temperature setting press – or + button.

• In Eco mode (Energy Saver mode), cooling will turn off once the set temperature is reached. Every 10 minutes fan will run so room temperature can be sensed 2. Change Mode
  Press the Mode button to choose the desired mode.

  3. Adjust Fan Speed
     Press Fan button to increase fan speed. You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature.

  4. Go to Sleep
     Press the sleep button. Temperature increases 4°F or 2°C over 1 hour and then holds this elevated setting for 7 hours.

  5. Activate Child Lock
     Press and hold the Mode button for 3 seconds. In the Child Lock state, the control panel will be locked. Press the Mode button for another 3 seconds to deactivate.

  6. Set the Timer
     Press the Timer button. Then enter up to 24 hours for automatic turn on or shut off. When unit is On, the value entered is the time that the unit will shut off. When unit is Off, the value entered is the time that the unit will turn on. Press and hold the Timer button for 2 seconds to cancel the timer setting.

  7. Change Temperature Unit
     Press and hold the – and + buttons together for 3 seconds to change the display temperature unit between °F and °C

  8. Clean the Dust Filter
     After 250 hours of use the Dust Filter light will illuminate to remind you to clean dust filter. Press and hold the “Fan” button 5 seconds and the light will go off

  9. PureAirTM Premium Allergen Filter (sold separately)
     If the PureAirTM Premium Allergen Filter is installed, the PureAirTM Filter light will illuminate white. After 1440 hours of use the light will illuminate red to remind you to replace a new Filter. Press Sleep button for 5 seconds to reset light.

Upgrade your AC with a PureAirTM Premium Allergen Filter

Your air conditioner has a reserved space for PureAirTM Premium Allergen Filter (sold separately). Enjoy fresher room air with the PureAirTM Filter that captures household dust, dust mite debris, pet hair, dander, smoke, and other fine particles.

Remember

Your Use & Care Guide has complete descriptions of all these features and more. Please read it carefully and keep in a safe place.

We are here for you

Scan the QR Code to the right or visit

• frigidaire.com
• frigidaire.ca for owner support

References

• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Frigidaire

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>