Kmart Bell 19S I005503 3MP Wi-Fi Doorbell Camera User Guide
- June 1, 2024
- Kmart
Table of Contents
Kmart Bell 19S I005503 3MP Wi-Fi Doorbell Camera
Specifications
- Model: Bell 19S
- Resolution: 3 MP
- Connectivity: Wi-Fi
- Power Source : USB charging
- Storage: Micro SD card slot (8GB – 128GB, FAT32 format)
Product Usage Instructions
Connection Preparation
Ensure your phone is connected to a 2.4Ghz Wi-Fi network and has a strong
signal where the camera will be installed.
Install the APP and Register the Account
Download the Mirabella Genio APP from your app store. Insert a compatible
Micro SD card into the camera. Charge the battery using the provided USB cable
and charger.
Doorbell Camera Installation
Unlock the mounting screw at the camera bottom, fix the bracket to the wall,
install the camera in the bracket, and lock it with the bracket screw.
Pairing the Camera using the Mirabella Genio App
- Turn on the camera and ensure the status light is blinking.
- Press and hold the reset button until you hear the reset sound.
- Open the Mirabella Genio App, select Security & Sensor, and choose your doorbell camera.
- Confirm the red indicator blinking, and enter your 2.4GHz Wi-Finame and password.
Welcome, Thank you for choosing our smart camera, getting started is easy
What’s included
Product Details
Connection Preparation
- Your phone must be connected to the 2.4Ghz Wi-Fi and not to the 5 GHz network.
- To verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the Settings menu and click on Wi-Fi. In this menu, you will see all the detectable networks in your area. Locate the SSID (the name of your network) and ensure that the Wi-Fi SSID does not end with a 5G / 5GHz.
Check that you have a strong Wi-Fi signal (at least two bars) in the location
where the smart camera is to be installed.
If you don’t have at least two two-bar signals on your phone, then you may
need to reconsider relocating the camera to a different location or obtain a
Wi-Fi extender to boost the Wi-Fi signal strength.
Install the APP and register Account
Download the “Mirabella Genio” APP to your smartphone from the App Store or
Google Play.
Insert the Micro SD card (not included) (Please note that the camera will
work without an SD card, but it will not be able to record any footage.)
- Take off the rubber cap to reveal the SD card slot. Carefully insert the Micro SD card into the slot, paying close attention to its orientation. Avoid applying excessive force during insertion. Once the card is in place, reattach the rubber cap.
- Make sure to use a Micro SD card with a capacity greater than 8GB, but not exceeding 128GB. It must be formatted in FAT32; the camera does not support the NTFS system.
We recommend using Scandisk, Verbatim, Kingston, and Samsung Class 10 high-
speed micro SD for the best performance.
To recharge the battery, first remove the plastic cover on the side to reveal
the charging port. Next, insert the provided USB cable and a standard phone
charger with a 5V 1A output (not included) to charge the battery.
Doorbell Camera Installation
- Unlock the mounting screw at the camera bottom with a screwdriver Fix the bracket to the wall with mounting screws
- Install the camera in the bracket and lock it with a bracket screw
Pairing the camera using the Mirabella Genio App
-
Remove the plastic cover on the side to expose the ON/OFF switch, and slide the switch to ON.
-
Press and hold the reset button, until you hear the “bug” reset sound, the status light will start to blink red, (1 blink per second), and the doorbell will be ready to pair with the Genio APP
If you are unsure whether the status light speed is correct or not, simply reset it, and then the doorbell will be in the pairing mode for sure. -
Please ensure your mobile phone is connected to your 2.4Ghz Wi-Fi network (DO NOT use Wi-Fi name ending with -5G)
-
Open the Mirabella Genio APP, tap on +, then choose Security & Sensor
Select your doorbell camera from the list of smart camera icon
-
Double-check and ensure that the LED indicator light is still red and blinking, tap confirm red indicator blinking and enter your 2.4GHz Wi-Fi name and password (not your genio password)
-
Tap continue and the QR code will appear, place this QR code in front of the camera at approximately 15-20cm, until you hear a sound, the indicator light will now change from blinking red to blinking blue
If the doorbell is unable to scan the QR code, then the doorbell is not in the pairing mode, please reset it
-
Please wait for the indicator light to switch to solid blue, then tap the beeped/indicator switch button
-
The camera is now successfully added to your APP. Please refer to the FAQ section for troubleshooting if this method does not connect.
Connecting Device added successfully
-
Q. LED indicator is not blinking red as per the APP screen
A. Power off the camera, wait for 20 seconds, then power on. Depress the reset button until you hear the reset sound, and then the indicator light starts to blink red (1 blink every second). -
Q. Camera doesn’t scan the QR code
A. Please ensure the camera is in the pairing mode, and the indicator light is blinking red, if you are unsure, please reset it, also check your screen brightness setting, and make sure the phone is not in the dark mode -
Q. After scanning the QR code, the indicator light doesn’t turn into a solid blue
A. This is an indication of a communication error with the router, please ensure you are using the correct 2.4Ghz Wi-Fi name and password, and please manually disable the 5GHz Wi-Fi signal on the router setting
Pairing the Wireless Chime
- Insert the chime into any standard USB outlet or adaptor (not included), the chime needs to be in the 5-metre range of the doorbell
- Open the Mirabella Genio app, tap on doorbell -›setting-> bell setting > Chime Type, select Wireless Chime.
- Press the reset button located on the rear side of the chime and ensure that the blue indicator light is blinking continuously. Then, proceed to press the “add” button on the app to link the chime. If you press the “add” button after the chime’s indicator light has ceased blinking, it will not function, and you will need to reset the chime and attempt the process once more.
- The chime’s indicator light will cease blinking as soon as you press “add,” indicating a successful pairing. You can verify this by testing it with the doorbell button. If the chime’s indicator light does not stop blinking or if there is no ringtone, please select “unbind” on the app and then repeat steps 3 to 4. The critical aspect for a successful chime pairing is to ensure that the blue indicator light on the chime is blinking when you press the “add” button on the app.
The camera interface is subject to slight alterations based on firmware updates Tap on the … icon you can access the camera’s Settings page
- Device Name: You can customize the camera name here
- Share Device , If you wish to share or remove this camera with other Genio APP user
- Basic Function Settings: Please ensure Talk Mode is set as Two Way Talk,
- IR Night Vision: please set it as Auto
- Detection Alarm Settings: human body filtering please ensure it is on
- PIR set : this is a motion detection sensitivity setting
- Memory Card Settings: This will only appear when 8GB-128GB Micro SD card is inserted
- Remove Device: Remove the device from the current account so you can repair it again or pair under a different account
FAQ
How to connect camera to another router/genio account?
Go the camera’ settings page, look for “remove device” Remove it and reset the camera and pair it again through the APP.
Poor performance, takes a long time to load the live footage?
Please check the Wi-Fi signal, if it is less than 60%, you will need consider changing the camera location or purchase a Wi-Fi extender to boost the signal.
Camera goes offline and doesn’t reconnect back?
Go the camera’ settings page, look for “remove device” Remove it and reset the camera and pair it again through the APP.
Still receive the Cannot find Device error?
Manually disable the 5Ghz Wi-Fi signal on the router setting Ensure that the 2.4Ghz Wi-Fi signal is on. Ensure the indicator light is blinking RED not blue Please check you have entered the correct 2.4Ghz Wi-Fi SSID and password
How to turn on or turn off notifications?
On the Genio APP home screen, Tap on Me -> Settings -> Push Notification -> turn on/off Enable notifications
turn on/off Enable notifications How to change view or arrange device sequences and manage room?
A. In the Genio APP home screen, tap on … on the top right corner, to access these options, tap on the family name to switch below rooms
Q. Need more help or further technical assistance from Mirabella engineer?
A. In the genio APP home screen, tap on, Me, -> FAQ & Feedback -> Report issue Fill the fault information or suggest for the APP/product, then submit
Remember the performance of a Wi-Fi camera relies heavily on the performance of your router, If you are using Telstra NBN or a dual-band router, you must disable the 5GHz Wi-Fi to make a successful connection and for best overall performance.
All trademarks are used for reference purposes only. Made in China
MIRABELLA INTERNATIONAL PTY LTD
1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043
TOLL FREE: 1800 636 528,
www.mirabellagenio.com.au
WARNING: Li-ion battery handling notice Always read the instruction manual and any warnings on the device before using a lithium-ion battery. Rechargeable lithium-ion batteries can explode, release flames, and/or cause burns if disassembled, punctured, cut, crushed, short-circuited, incinerated, recharged incorrectly, or exposed to water, fire, or high temperatures.
- Use the battery charger and AC adapter specified for use with the lithium-ion battery.
- Do not force the lithium-ion battery into a battery charger or device if it does not fit.
- Do not throw lithium-ion batteries into a fire or heat source also leads to overheating, explosion or fire.
- Do not connect the positive and negative terminals of the lithium-ion battery with a metal object.
- Do not throw lithium-ion batteries, drop them from high places, or otherwise subject them to strong impacts.
- Do not put a lithium-ion battery in a microwave oven, pressure container, or other such devices.
- Do not place combustible materials on top of or over a lithium-ion battery when charging or discharging.
- Do not disassemble or modify a lithium-ion battery.
- When the electric device is not being used for an extended period, remove the lithium-ion batteries from the device and store them in a dry place.
- Keep devices that contain batteries and batteries themselves out of reach of children. The mishandling of lithium-ion batteries is dangerous.
- Lithium-ion batteries have finite life spans. If the batteries require constant recharging, replace them with new ones.
- If the battery leaks or gives off an unusual odour, immediately remove it and place it away from any naked flame.
- Never dispose of a lithium-ion battery in your regular trash or recycling bin, contact your local council for recycling options.