INOPOOL HHC-321 Electric Cordless Rechargeable Pool And Spa Vacuum Cleaner Instruction Manual
- June 1, 2024
- INOPOOL
Table of Contents
- 1. Charger connection
- 2. Body assembly
- 3. Power On and Turbo speed mode
- 4. When to use the cartridge filter ?
- 5. Cleaning the front cover & filters
- Maintenance and storage
- LIMITED WARRANTY
- Troubleshooting
- HHC-321 PARTS LIST
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
INOPOOL HHC-321 Electric Cordless Rechargeable Pool And Spa Vacuum Cleaner Instruction Manual
SAFETY WARNING
When installing and using this electrical equipment, you should always follow
the basic safety precautions. Please read the following carefully
⚠ Warning!
This cleaner is not a toy and must be operated by people older than 8 years
old. Any person who operates this cleaner has to read the manual carefully
before operating the cleaner.
- The cleaner is designed to clean swimming pools.
- Please use the original battery and charger when using this cleaner.
- Only charge the cleaner when the cleaner is off.
- Store the cleaner in a clean and dry place. Do not store or expose the cleaner to direct sunlight, or close to explosive materials.
- The cartridge filter may be damaged if exposed to sharp objects while vacuuming under water.
- Do not block the suction port beneath the vacuum head while using the cleaner. Should the port opening become blocked, remove the object(s).
- Do not attempt to disassemble the cleaner without professional guidance from an authorized repair center.
- Should an oil leak occur from the motor, remove the cleaner and contact an authorized repair center or your dealer.
- Stop using the cleaner if it is not operating correctly. Contact an authorized repair center for further guidance.
- Cleaner working conditions: (10)-1 Maximum applicable water depth: 3 m (10 ft) (10)-2 Water temperature: 4°C( 39.2°F )-35°C( 95°F )
1. Charger
- Use the original charger provided. DO NOT use another charger.
- For indoor use only. The charger should not be used outdoors and should not be exposed to rain, humidity, liquid, or heat.
- Keep the charger out of reach of children.
- Never use the charger if any physical damage is observed.
- Do not handle the cleaner and charger with wet hands and bare feet while charging the cleaner.
- Disconnect the charger from power when not in use.
- If the wire going to the charger is damaged, it must be replaced by a new charger to avoid danger.
- Make sure the cleaner and charger are totally dry before use.
- Charge the cleaner 3 hours prior to the first use. After fully charged, it runs 90mins in basic speed, and 60mins in high speed;
2. Battery disposal
- The cleaner battery is a lithium battery, it must be disposed properly, please contact with your local authority for more information.
- Never attempt to disassemble the lithium battery.
- Remove all personal items such as rings, bracelets, necklaces and watches when unwiring a lithium battery from the vacuum unit.
- The battery may cause a short circuit and can cause severe burning.
- Wear protective eye protection, gloves and clothing when removing the battery pack.
- DO NOT expose the cleaner to cigarette smoke or flames or, it may causes gas to escape from the cleaner.
- If acid comes in contact with skin or clothing, wash immediately with plenty of soap and water.
- If acid comes in contact with eyes, immediately flush eyes with cool water for at least 15 minutes. Seek medical attention immediately.
Above warnings and cautions are not intended to incorporate all possible instances for risks and/or severe injury. Pool/spa owners should always exercise extreme caution and common sense when operating the cleaner.
How to use it
Assembly
- A: Front filter B:
- Cartridge filter
- C: Motor body
- D: Micro filter & Check Valve
- E: Charger
Telescopic Pole not included
- A: Elbow
- B: Hose ( 20cm )
- C: V clip
- D: Main connector
- E: Nut
- F: Lock adapter
1. Charger connection
- Plug one end of the charger into the power socket, and then plug the USB cable into the charging port of the cleaner. At this time, the three green indicator lights on the cleaner flash circularly, indicating normal charging.
- After about 4 hours, three green indicator lights remain on to indicate that charging is complete.
2. Body assembly
2.1 Filter element assembly and body parts assembly
Assemble the body parts in the direction of the arrows.
2.2 Pole assembly
Connect all parts as follows:
Telescopic pole not included
3. Power On and Turbo speed mode
3.1 Press and hold the power button down on the cleaner for 2-3 seconds. If
the “green” indicator light remains on, the cleaner is on . Initially, the
cleaner is in the “low-speed mode”.
3.2 Press the power button again, a “blue” indicator light appears, and the
cleaner ON/OFF is in the “high speed mode”. In high-speed mode, the cleaner
can vacuum large and small debris to include sand, dead algae and other
sediment.
3.3 When you press the power button a third time, the indicator lights are off
and the cleaner itself is turned off.
Note: The high and low speed mode of the cleaner is switched from “low speed mode” to “high speed mode”, If you want to switch from “high speed mode” to “low speed mode”, you need to shut down and operate 3.1 again.
4. When to use the cartridge filter ?
The cartridge filter is used to collect fine dust, sand, dead algae and other small debris; The cartridge filter is not necessary if your vacuuming large debris such as leaves, acorns or other large items.
5. Cleaning the front cover & filters
5.1 Front transparent cover and cartridge filter
- Lift up the (2) clips located on each side of the transparent cover as shown below. Remove the transparent cover and the cartridge filter from the body;
- Remove all debris and clean and rinse the transparent cover.
- Use a high-pressure hose end nozzle to thoroughly clean the cartridge filter or purchase a filter cleaning tool as shown.
- Reinstall the cartridge filter into the grooved section located at the bottom of the upper body. Securely attach the transparent cover to the body of the cleaner by closing the (2) clips located on each side.
(Reference: 2.1: Body assembly)
5.2 Cleaning the fine metal filter
- Press and hold the button at the front end of the filter cover to remove the filter cover from the body.
- Unscrew and remove the cap located at the top of the body to access the metal filter screen.
- Thoroughly clean the metal filter screen removing all debris.
- Replace the filter cover and reattach the filter cover to the body.
5.3 Battery replacement
NOTE: Please contact an authorized repair center to replace the battery.
Follow the steps below to replace the battery.
Maintenance and storage
- The battery discharges during storage. Make sure the robot is fully charged before storing the cleaner.
- When the cleaner is not in use, charge the battery every three months. ·Be sure to unplug the charger from the GFCI electrical outlet and from the cleaner during storage.
·Remove the filters from the cleaner during storage. Clean the filters prior to storing them.
·Make sure all water is removed from the cleaner prior to storing it.
·Use a wet cloth to clean and dry the cleaner and its accessories.
·Store in a well-ventilated location away from sunlight, heat, fire sources, pool chemicals and children.
·Store in temperatures between 10 º C – 25 º C (50 º F – 77 º F).
Note: higher temperatures may shorten the life of the battery.
LIMITED WARRANTY
– USA/CANADA
General Terms
Note: Please retain the original box/packaging and internal packaging
materials for any Inovasia product to facilitate warranty returns. You are
solely responsible for damage during shipping. You may need to purchase
packaging / shipping materials from Inovasia’s repair center to ship your
product.
Inovasia (“Inovasia”) warrants this product (“Product”) against defects in
material or workmanship for the time period set forth below (“Warranty
Period”) for each product type. Pursuant to this Limited Warranty, during the
Limited Warranty Period upon receipt of verification of the purchase date of
Product and warranty return in accordance herewith, Inovasia will, in its sole
discretion:
(i) repair the Product (or parts thereof determined to be defective) to the
original specifications, or
(ii) replace the Product with a new or refurbished* Product. In the event of a
covered defect, these are your exclusive remedies.
- For purposes of this Limited Warranty, “refurbished,” means a product or part that has been returned to its original specifications.
The HHC-321 model comes with a 1-year limited warranty period
Warranty Claim Procedure
To obtain warranty service, you must comply with the following requisite
instructions:
-
Visit website at https://inopool-us.com. You will be guided through the process on how to obtain an RMA# (Return Merchandise Authorization Number), which is required for all approved warranty returns. All customers must obtain an RMA number before any Product will be accepted for warranty service. For additional help go to: customerservice@avalancheind.com
-
If instructed to do so, package the Product properly and securely, along with the Inovasia battery charger (if the unit requires an Inovasia charger), in the original box.
-
Attach the printed RMA number you received from the website to the outside of the package. Note: It is advisable to also place a copy of the RMA inside of the package. If you are not able to print the RMA number from the website, you must write your RMA number legibly on two sides of the box. We recommend using thick black indelible marker. Packages lacking an RMA or having illegible RMA will not be accepted for warranty service.
-
Ship the Product with the RMA clearly legible to:
Attention: Avalanche 3PL 144 Dixon St, Selbyville, DE 19975
Inovasia is not responsible for lost, stolen or damaged property in transit to Avalanche 3PL & recommends that you insure the contents of your package. -
Repair/Replacement Warranty. This Limited Warranty shall apply to any repair, or replacement of any Product or part(s) for the lesser of the remainder of the original Limited Warranty Period or for (1) year whichever is shorter. Any original Products or parts replaced during Warranty Service shall become the exclusive property of Inovasia.
Limitations and Exclusions
THIS LIMITED WARRANTY IS SOLELY APPLICABLE TO NEW PRODUCTS PURCHASED IN THE US
AND CANADA FROM AN AUTHORIZED INOPOOL DEALER BY THE ORIGINAL PURCHASER AND IS
NOT TRANSFERABLE TO SUBSEQUENT PURCHASERS. This Limited Warranty covers only
defects in material or workmanship that arise in manufacturing or in the
course of ordinary consumer use and which preclude normal use of the Product
for its intended purpose. REFURBISHED PRODUCTS ARE NOT SUBJECT TO THIS
WARRANTY BUT ARE INSTEAD SUBJECT THE TERMS OF THEIR SALE, INCLUDING ANY
WARRANTY PERIOD SPECIFIED AT THE TIME OF PURCHASE.
Exclusions. This Limited Warranty does not cover defects that are solely cosmetic in nature, or which do not interfere with function of a warranted Product. Also excluded are issues caused by other than manufacturing or normal consumer use, including but not limited to Product issues caused by commercial use of any kind or extent, misuse, abuse, accidental damage, limitations in technology, or unauthorized access to or modification of any part of the Product. This Limited Warranty is void if the factory-applied serial number has been altered or removed from the Product. This Limited Warranty does not cover any Inovasia products sold AS IS or WITH ALL FAULTS or consumables (such as batteries), or those which are expressly excluded from warranty coverage, including but not limited to accessories and supplemental items provided with various Products.
Disclaimer of Other Warranties. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND EXCEPT AS PROVIDED HEREIN, INOVASIA EXPRESSLY DISCLAIMS ALL WARANTIES EXPPRESS OR IMPLIED IN CONNECTION WITH THE PRODUCTS, INCLUDING BUT NOT LIMITED TO WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.
Exclusion of Damages and Limits of Liability. IN NO EVENT, REGARDLESS OF THE LEGAL BASIS FOR THE CLAIM, WILL INOVASIA, ITS AFFILIATES, AND/OR REPRESENTATIVES’ BE LIABLE FOR SPECIAL, INDIRECT, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES, EVEN IF INOVASIA HAS KNOWLEDGE OF OR BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND WHETHER OR NOT THEY ARE FORESEEABLE. STATUTORY DAMAGES AWARDED UNDER ANY LAW WILL BE DEEMED TO BE DIRECT AND COMPENSATORY, AND NOT PUNITIVE OR EXEMPLARY DAMAGES; AND IN NO EVENT SHALL INOVASIA BE LIABLE TO CUSTOMER OR ANY OTHER PERSON OR ENTITY FOR LIABILITY ARISING OUT OF THIS WARRANTY, WHETHER ARISING IN CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY.
INOVASIA’S AGGREGATE LIABILITY UNDER THIS WARRRANTY SHALL BE LIMITED TO DIRECT DAMAGES UP TO THE GREATER OF THE AMOUNT PAID BY CUSTOMER FOR ANY PRODUCT COVERED UNDER THIS WARRANTY OR ONE THOUSAND DOLLARS (US) (US $500). THIS LIMITATION APPLIES REGARDLESS OF WHETHER THE ALLEGED LIABILITY IS BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF WARRANTIES, OR ANY OTHER LEGAL THEORY.
NOTWITHSTANDING THE FOREGOING, THE LIMITATIONS AND THE EXCLUSIONS SET FORTH IN THIS WARRANTY DO NOT APPLY TO (I) INOVASIA’S LIABILITY FOR ANY DAMAGES AWARDED OR ANY AMOUNTS TO SETTLE LITIGATION OR THREATENED CLAIMS RESULTING FROM DEATH, BODILY INJURY, OR ITS GROSS NEGLIGENCE OR WILLFUL MISCONDUCT. CUSTOMER ACKNOWLEDGES THAT INOVASIA HAS SET ITS PRICES FOR THE PRODUCT AND PROVIDED THIS WARRANTY IN RELIANCE UPON THE LIMITATIONS OF LIABILITY AND THE DISCLAIMERS OF WARRANTIES AND DAMAGES SET FORTH HEREIN, AND THAT THE SAME FORM AN ESSENTIAL BASIS OF THE BARGAIN BETWEEN THE PARTIES WITH RESPECT TO THIS WARRRANTY.
ENVIRONMENTAL REGULATIONS
Please respect the local regulations and help to protect the environment.
Return non-working electrical equipment to a facility appointed by your
municipality that properly recycles electrical and electronic equipment. DO
NOT dispose of the device illegally. Remove all batteries before disposing of
the device.
Inovasia reserves the right to change all or part of the contents in this
document without prior notice
Troubleshooting
If you have problems with your cleaner, follow the troubleshooting steps below
to restore performance.
Note: Turn off the power before making any repairs.