navlinkz ARC-U004 Steering Wheel Remote Set Installation Guide
- June 1, 2024
- NavLinkz
Table of Contents
Manual
Steering wheel remote set
ARC-U004
Interface-box
ARC-004
Universal harness
ARC-UNI
Harnesses device-specific
ARC-10x (not included in the set)
Product features
- Steering wheel control for after-market devices
Alpine, Blaupunkt, Clarion, Digitaldynamic, JVC, Kenwood, Pioneer, Zenec
Information
Changes/updates of the vehicle’s software can cause malfunctions of the
interface. We offer free software-updates for our interfaces for one year
after purchase. To receive a free update, the interface must be sent in at own
cost. Labor cost for and other expenses involved with the software-updates
will not be refunded.
Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for
installation. The place of installation must be free of moisture and away from
heat sources.
1.1. Delivery contents
1.2. Setting of dip switches 1-4 (radio specific)
To use the steering wheel control is dependent on the manufacturer of the
after-market device a device-specific IR control cable ARC-1xx needed. The dip
switches 1-4 of the interface-box ARC-004 have to be set on the
manufacturer/port. The following table shows the IR control cable and the dip
switch settings for the supported manufacturers.
Harness | Description | Dip1 | Dip2 | Dip3 | Dip3 |
---|
ARC- 104
| Control cable set for Alpine| OFF| OFF| OFF| OFF
Control cable set for Clarion| OFF| ON| ON| OFF
Control cable set for JVC (Mini-Jack connection)| OFF| ON| OFF| ON
ARC- 105| Control cable set for Kenwood (open wire)| OFF| ON| ON| ON
Control cable set for JVC (open wire)| OFF| ON| OFF| ON
ARC- 106| Control cable set for Kenwood (DIN connection)| OFF| ON|
ON| ON
ARC- 107
| Control cable set for Pioneer| OFF| OFF| ON| ON
Control cable set for Sony (remote control version 1)| OFF| ON| OFF| OFF
Control cable set for Sony (remote control version 2)| OFF| OFF| ON| OFF
Blaupunkt (Mini-Jack connection)| OFF| OFF| ON| ON
ARC- 108| Control cable set for Zenec| OFF| OFF| OFF| ON
1.3. Setting of dip switches 5-8 (vehicle specific)
Dip switch 5-8 sets the vehicle brand.
Vehicle | Dip5 | Dip6 | Dip7 | Dip8 |
---|---|---|---|---|
Audi | OFF | OFF | OFF | ON |
Alfa Romeo | ON | OFF | ON | ON |
BMW | OFF | OFF | OFF | OFF |
Fiat | ON | OFF | ON | ON |
Ford | OFF | OFF | OFF | OFF |
GM – Version 1 | OFF | OFF | OFF | ON |
GM – Version 2 | OFF | OFF | ON | OFF |
Honda | OFF | ON | ON | OFF |
Hyundai | OFF | OFF | ON | ON |
Mazda | OFF | ON | ON | ON |
Mitsubishi | OFF | OFF | ON | ON |
Nissan – Version 1 | OFF | ON | OFF | OFF |
Nissan – Version 2 | ON | OFF | OFF | OFF |
Opel | OFF | OFF | ON | ON |
Skoda | OFF | OFF | OFF | ON |
Subaru – Version 1 | ON | OFF | OFF | ON |
Subaru – Version 2 | ON | OFF | ON | OFF |
Toyota | OFF | ON | OFF | ON |
VW | OFF | OFF | OFF | ON |
1.4. ARC-004 LED functions
LED | Status | Function |
---|---|---|
Red | Flashes | Control commands are sent |
Blue | Lights | Interface is ON |
1.5. Steering wheel functions
Button | Function | Vehicle / radio support |
---|---|---|
VOLUME + / – | Volume up / volume down | All vehicle brands , all radio |
brands
TRACK + / –| Next track / radio station, previous track / radio station|
All vehicle brands , all radio brands
SOURCE| Source switching| Compatible vehicle brands, all radio brands
MUTE| Mute ON/OFF| Compatible vehicle brands, all radio brands
PICK UP PHONE / HANG UP PHONE| Answer call / end call| Compatible
vehicle brands, all radio brands
PHONE| Answer call OR end call| Compatible vehicle brands, all radio
brands
VOICE CONTROL| Activation of voice control| Compatible vehicle brands,
compatible radio brands
1.6. Assignment of the 12-pin Molex plug on ARC-UNI harness
Cable colour | Assignment |
---|---|
Pin 1 __ black (ø0,8) | POWER GROUND |
Pin 2 grey | SWC 4 |
Pin 6 __ black (ø0,5) | SWC GROUND |
Pin 7 red | +12V ACC (ignition) |
Pin 9 ____ white / black | SWC 1 |
Pin 10 __ brown | SWC 3 |
Pin 11 ____ blue / red | SWC 2 |
Connection schema
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to
factory rules disconnecting the battery has to be avoided, it is usually
sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not
show success, disconnect the battery with a resistor lead.
Place of installation of the ARC-U004 set is usually in the radio slot on the
vehicle’s radio port. Depending on the vehicle, connect the SWC 1
(white/black), SCW 2 (blue/red), SWC 3 (brown), SWC 4 (grey) and SWC GROUND
(black ø0.5) wires to the original radio plug as described below. Connect the
open red wire “+ 12V ACC” to ignition and the open black wire “POWER GROUND”
(ø0,8) to vehicle ground.
Vehicle-specific assignments
As additional support the following pages give information about vehicle-
specific steering wheel buttons pin definitions. This information is subject
to change and must be verified by the installer.
Link to the vehicle compatibility list:
http://www.caraudio-systems.de/arc_00x_compatibility.pdf
ALFA ROMEO
Vehicles with MINI-ISO socket in the radio slot
– SWC 1 > Pin 10
– SWC 2 > Pin 11
– SWC GROUND > Pin 12
AUDI
Vehicles with MINI-ISO socket in the radio slot (without CAN-BUS)
– SWC 4 > Pin 11
BMW
Vehicles with round contact socket in the radio slot
– SWC 4 > Pin
BMW
Vehicles with Quadlock socket in the radio slot
– SWC 4 > Pin 9
FORD
Vehicles with 17-pin socket in the radio slot
– SWC 1 > Pin 11
– SWC GROUND > Pin 12
FORD
Vehicles with Quadlock socket in the radio slot
– SWC 1 > Kammer A – Pin 6
– SWC GROUND > Kammer A – Pin 8
FORD
Vehicles with 24-pin socket in the radio slot
– SWC 1 > Pin 18
– SWC GROUND > Pin 19
HONDA
Vehicles with 17&20-pin or 20-pin socket in the radio slot
– SWC 1 > Pin 7
– SWC GROUND > Pin 6
HONDA
Vehicles with 24&20-pin or 24&12-pin socket in the radio slot
– SWC 1 > Pin 16
– SWC GROUND > Pin 5
HYUNDAI
Vehicles with 24-pin socket in the radio slot
– SWC 1 > Pin 4
– SWC GROUND > Pin 17
HYUNDAI
Vehicles with MINI-ISO socket in the radio slot
– SWC 1 > Pin 11
– SWC GROUND > Pin 8
KIA
Vehicles with 24-pin socket in the radio slot
– SWC 1 > Pin 4
– SWC GROUND > Pin 17
KIA
Vehicles with MINI-ISO socket in the radio slot
– SWC 1 > Pin 11
– SWC GROUND > Pin 8
MAZDA
Vehicles with 24-pin socket in the radio slot
– SWC 1 > Pin 10
– SWC GROUND > Pin 9
OPEL
Vehicles with an 8-pin ISO socket in the radio slot
– SWC 1 > Pin 1
– SWC GROUND > Pin 8
NISSAN
Vehicles with 20-pin socket in the radio slot
– SWC 1 > Pin 6
– SWC 2 > Pin 16
– SWC GROUND > Pin 15
SEAT
Vehicles with MINI-ISO socket in the radio slot (without CAN-BUS)
– SWC 4 > Pin 11
SKODA
Vehicles with MINI-ISO socket in the radio slot (without CAN-BUS)
– SWC 4 > Pin 11
TOYOTA
Vehicles with 20-pin socket in the radio slot
– SWC 1 > Pin 7
– SWC 2 > Pin 8
– SWC GROUND > Pin 6
TOYOTA
Vehicles with 28-pin socket in the radio slot
– SWC 1 > Pin 21
– SWC 2 > Pin 22
– SWC GROUND > Pin 23
VW
Vehicles with MINI-ISO socket in the radio slot (without CAN-BUS)
– SWC 4 > Pin 11
Specifications
Operation voltage | 10.5 – 14.8V |
---|---|
Stand-by power drain | 0mA |
Operation power drain | ~50mA |
Temperature range | -30°C till +80°C |
Weight | 44g |
Measurements (box only) W x H x D | 76 x 27 x 54 mm |
Technical Support
CAS GmbH
manufacturer/distribution
In den Fuchslöchern 3
D-67240 Bobenheim-Roxheim
email support@casgermany.com
Legal disclaimer: Mentioned company and trademarks, as well as product
names/codes are registered trademarks ® of their corresponding legal owners.
Version 05.04.2024
ARC-U004
Documents / Resources
|
navlinkz ARC-U004 Steering Wheel Remote
Set
[pdf] Installation Guide
ARC-U004 Steering Wheel Remote Set, ARC-U004, Steering Wheel Remote Set, Wheel
Remote Set, Remote Set, Set
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>