EMAX DC36 Weather Station Qi Charger Instruction Manual
- June 1, 2024
- Emax
Table of Contents
EMAX DC36 Weather Station Qi Charger
Thank you for purchasing the DC36 Weather Station Qi charger
- Please use the original or manufacturer-specified attachments or accessories.
- Please do not disassemble products, so as not to cause trouble or safety hazards
- Do not use this product in a place near the water source, and do not place this product in a damp place
- Due to improper use of product damage, odor, smoke, and other phenomena, please immediately terminate the use
- Do not place the product in a strong electromagnetic wave, strong static electricity, and easy condensation.
- Please do not place the magnetic stripe card (including credit card, telephone card, bank card, boarding card, etc.) near the product, Otherwise, it will be damaged by the magnetic field
- If you use a wireless charger in an area with weak network signals, your mobile device may not be able to receive the network.
- Do not place metal, magnet, magnetic stripe card and other foreign matters between the mobile device and the wireless charger, otherwise, the mobile device will not charge normally or be damaged due to overheating.
- If a thick protective shell is installed for the mobile device, the wireless charging may not work properly. If the cover is thick, remove it, and then put the mobile device on the wireless charger for charging
Main features
- Smart home wireless charger charge any equipment that works with QI wireless charging standard
- Wireless charging output: MAX.10W
- High definition and super large digital LCD screen time display
- Perpetual Calendar Up to Year 2099
- Time format in optional 12/24 HR
- Daily Alarm clock and snooze function
- Remote sensor low battery indicator
- 433.92MHz wireless outdoor temperature sensor
- Wireless transmission distance greater than 60 meters, 197feet in an open area
- Temperature unit in optional °C /°F
- INDOOR temperature measurement ranges: -9.9°C (14.2°F) ~ 50°C (122°F)
- OUTDOOR temperature measurement ranges: -40°C (-40°F) ~ 70°C (158°F)
- Humidity measurement ranges: 20-95%
- Power Supply:
- Spare battery: CR2032-3V
- Working power supply :DC–9V 2.0A【QC3.0】
- Remote sensor: 2 x LR03 AAA size 1.5V
Appearance description
- Push the ALARM on/off switch to the “ON” position, The LCD display the “ ” icon, the alarm function is ON, Push the ALARM switch to the “OFF” position, the “ ” icon will disappears from the display, the alarm function is OFF.
- In normal mode, press the button , the date display position can be switched to alarm time display mode.
- Press and hold the button for 3 seconds until hour of the Alarm time starts to flash, then press buttons to set the required HOUR of alarm, hold the buttons can be adjusted quickly.
- Press the button to confirm the item has been set and go to the next one, the sequence of setting items is as follows: HOUR of alarm MINUTE of alarm SNOOZE time
- The default snooze time is 10 minutes, and can be set to 5/10/15/20/25/30/OFF, when set to OFF, there is no snooze function. F.Y.I.:
- If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the alarm time set mode.
- The Alarm will sound for 2 minutes if you do not deactivate it by pressing any button.
Switching off the alarm signal
- When it’s ringing, press any button except the【SNOOZE】 key to stop the Alarm sound.
- When it’s ringing, touch and hold the【SNOOZE】 key for 3 seconds to stop the Alarm sound.
Snooze function
- When it’s ringing, touch the SNOOZE key once the alarm sounds to get to snooze mode, when the set snooze time is over, it will ring again.
Backlight mode settings
- Touch and hold the【LIGHT】button for 3 seconds to switch between manual or automatic backlight adjustment modes.
- Default manual adjustment of backlight brightness after power on, when the automatic adjustment mode is switched, the symbol is displayed.
- In the manual adjustment mode, press the button to manually adjust the backlight brightness.
- In the automatic adjustment mode, the product will detect the ambient brightness through the light sensor. When the environment is very bright, the backlight brightness is also bright. When the ambient brightness is dark, the backlight brightness will also be automatically dimmed.
Temperature unit switch
- Press the button to switch the temperature unit in ℃ or ℉.
RF Transmission Procedure
- The main unit automatically starts receiving transmission from the remote sensor for temperature and humidity after inserting the charger for the power supply.
- The remote sensor will automatically transmit temperature and humidity signal to the main unit after the batteries are inserted.
- If the main unit fails to receive a transmission from the remote sensor (“- -.-” and “- -” appear at the remote sensor temperature and humidity display position ), press and hold the + button for 2 seconds, RF icon will be flashing,the main unit will rescan the launch signal of the channel.
- If the main unit is paired with multiple remote sensors, pressing + the button can switch to displaying the temperature and humidity data of different channels, when the symbol appears, the data of different channels will be displayed automatically every 5 seconds.
Low Battery
- When the low battery symbol appears and flashing, Please replace the remote sensor with a new battery as soon as possible.
Query Maximum/minimum numerical value
- When the temperature and humidity are shown in the LCD, The production begins to record the temperature/humidity maximum and minimum numerical values.
- Press the once【MEM】button, and the LCD will display the maximum value of temperature and humidity, The LCD will display the minimum value of temperature and humidity if press once “MEM” button again when the maximum value is displayed.
- At the same time, there are “MAX” or “MIN” displayed on the LCD.
- The temperature and humidity maximum/minimum value will RE recorded after pressing and holding the “MEM” button for 3 seconds.
- The memory value of the day will be automatically cleared at 0:00 every night. F.Y.I.:
- If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above ranges, the HH.H will be displayed.
Weather forecasting function
- Please take the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
- The weather forecast is calculated from the evaluation of fluctuations in the barometric pressure and may deviate from the actual weather conditions.
- The weather station displays the following weather symbols:
Main unit
- A: Light sensor
- B: Weather forecast pattern
- C: Time
- D: Automatic backlight brightness indicator
- E: Alarm ON indicator
- F: Wireless charging indicator
- G: Date
- H: Remote sensor low battery indicator
- I: Remote sensor channel number
- J: Indoor temperature
- K: Remote sensor temperature
- L: Indoor humidity
- M: Remote sensor humidity
- N: Battery compartment cover
- O: Power input socket (type-C)
- P: 【MEM】button
- Q : button
- R :【+】button
- S : button
- T : button
- U :【Alarm on/off 】Toggle Switch
- V :【Light/snooze】touch keys
- W: Wireless charging center location
Remote sensor
- LCD
- Transmit indicating lamp
- Wall mounting hole
- Battery compartment cover
- Temperature unit switching button
- Manual pairing transmit button
- Channel switch
Initial operation
- Open the main unit battery compartment cover
- Insert CR2032 batteries observing polarity (“+” and “ –“ marks), If there is a battery insulating sheet, just pull out the insulating sheet.
- Insert the TYPE-C interface of the data cable into the corresponding socket on the back of the product, and plug the other end into the USB-A output port for phone charging (Must be able to output DC9V2.0A).
- Enter RF pairing mode after the screen is on, this process lasts for a maximum of 3 minutes and will displayed by a flashing reception antenna symbol next to “channel number” . Now, Open the remote Sensor battery compartment cover, push the channel switch to the “1” position, Insert 2 x AAA batteries observing polarity (“+” and “–” marks), close the battery cover.
- If there are multiple remote controls, according to the same method, push the channel switch to the “2” or “3” position, and establish another 2 remote sensor connections.
- After main unit has created a connection to the remote sensor, pairing mode will exit after 3 minutes.
Clock settings
- Press the button to switch 12/24Hr timing format.
- Press and hold the button for 3 seconds, the HOUR start to flash, and press buttons to set the hour you need.
- Press the button to confirm the item has been set and go to the next one, the sequence of setting items is as follows: HOUR MINUTE Format of DATE (D/M or M/D) YEAR MONTH DATE Current weather
- When adjusting the value, press and hold the button to adjust quickly.
- Press the button to confirm the last item to end the setting procedures, then it will return to the normal mode.
- When choosing the 12-hour format, if “PM” is displayed before the hours, it means that the hour is post-midem. F.Y.I.:
- If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the set mode.
Alarm settings
The weather symbols indicate the weather fluctuation over the next 8 hours and not the current weather. Trend display
- The barometric pressure is rising.
- The barometric pressure is falling.
- The barometric pressure is relatively stable.
Wireless charging
- Place the mobile device which supporting QI standard on the Wireless charging center location, the red icon light on.
- During normal charging, icon remains on, but disappears when fully charged (currently only supported by Samsung and some I phone mobile devices). The icon flashes when metal or similar items are detected.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Specifications
- Main Unit Dimensions:
- Remote Sensor Dimensions:
- Power Input: Type-C
- Display: LCD
- Wireless Charging: Yes
FAQ
Q: How do I set the alarm?
A: Toggle the ALARM switch to set it ON or OFF. Press the button to switch
between date and alarm time display modes.
Q: How do I stop the alarm?
A: Press any button except the SNOOZE key when it’s ringing or touch and
hold the SNOOZE key for 3 seconds to stop the alarm sound.