Xiaomi ES 6 Bluetooth Earphone User Manual
- June 1, 2024
- Xiaomi
Table of Contents
Xiaomi ES 6 Bluetooth Earphone
Product Information
Specifications
- Product Name : ES 6 Bluetooth Earphone
- Bluetooth Version : BT 5.3
- Frequency Response: Not specified
- Bluetooth Name : ES 6
- Operating Distance: 10 meters
- Playback Duration : About 6 hours
- Talk Time : 4 hours
- Battery Capacity: Not specified
- Battery Capacity of Charging Chamber: Not specified
- Charging Duration : 2 hours
Product Overview
- Microphone LED light
- Charging contact
- Touch the multifunction button
- USB charging port
Package Contents
- 2 x ES 6 Bluetooth Headset
- 1 x User Manual
- 1 x Type-C Charging Cable
- 1 x Headphone Charging Compartment
Product Usage Instructions
Charging
- Charge: Put the headset into the charging chamber, connect the charging chamber with the Type-C charging cable, and connect the power supply for charging. If the charging is incomplete, the LED will flash red.
- Open: The indicator light of the headset in the charging compartment is on, indicating that the headset is turned on.
- Close: Put the headset back into the charging compartment to turn off the headset.
Playback Controls
- Play/Pause: Connect the mobile phone with Bluetooth and touch the multifunction button to play; touch the multifunction button again to pause.
- Change Song: While playing, touch the multifunction button three times to change the song.
- Answer/End Call: Touch the multifunction button to answer or end a call.
- Reject Call: Long-touch the multifunction button for 2 seconds to reject an incoming call.
- Voice Assistant: Touch the multi-function button for 3 seconds to activate the smart voice assistant.
- Volume Control: Short-touch the left headset multifunction button twice to reduce volume; touch the right headset button twice to increase volume.
Bluetooth Pairing
-
1. **Bluetooth Pairing Steps:**- Open the Bluetooth function on your mobile phone.
- Select “ES 6” to connect.
- The headset will emit a prompt tone upon successful connection.
Note: Charge the headset before initiating Bluetooth pairing.
FAQ
- Q: How long does it take to charge the ES 6 Bluetooth earphones?
- A: The charging duration for ES 6 Bluetooth earphones is approximately 2 hours.
- Q: Can I change songs using the ES 6 earphones?
- A: Yes, you can change songs by touching the multifunction button three times while playing music.
Product Overview
- ES 6 Bluetooth headset*2
- User Manual*1
- Type-C charging cable*1
- Headphone charging compartment*1
Charge
Put the headset into the charging chamber, connect the charging chamber with Type-C charging cable and connect the power supply for charging; If the charging is incomplete, the LED will flash red.
Open
The indicator light of the headset in the charging compartment is on, which means the headset is turned on.
Close
Put the headset back into the charging compartment to turn off the headset.
Play/Pause
Connect the mobile phone with Bluetooth and touch the multi-function button to play; Touch the multifunction button again to pause
Change Song
When playing, touch the multifunction button three times to change the song.
Answer the phone
When you receive a call, touch the multifunction button to answer the call.
Terminate a call
When you are in a call, touch the multifunction button to end the call.
Reject Phone
When you receive a call, long touch the 2-second multifunction button to reject the call.
Insufficient power
When the headset is low on power, there will be an audible reminder every 30 seconds until the headset is turned off due to low power
Voice Assistant
Touch the multi-function button for 3 seconds to call up the smart voice assistant.
Increase or decrease volume
Short touch the left headset multifunction button twice to reduce the volume; Touch the multifunction button of the right headset twice to increase the volume
Bluetooth pairing
Bluetooth name: ES 6
- Open the Bluetooth function on the mobile phone.
- Select “ES 6” to connect.
- The headset pops up a prompt tone, and then the Bluetooth connection is successful.
- Note : Before Bluetooth pairing, please charge the headset.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>