PPSK LA-064-MHL Moving Head DJ Lights User Manual

PPSK LA-064-MHL Moving Head DJ Lights

Specifications

• Dimensions: 3.9 inches x 7.1 inches x 5.5 inches
• Weight: 4.8 pounds
• Power Supply: 110-240 VAC, 50/60 Hz

Product Usage Instructions

Before You Begin

Unpacking Instructions: Carefully unpack the product and ensure all parts are present and in good condition.

Safety Introductions:

• Keep the user manual for future reference.
• Check for transportation damage before use.
• Ensure power supply voltage matches fixture requirements.
• Ground the yellow/green conductor to earth.
• Disconnect main power before servicing.
• Use safety chain when fixing the fixture.

Introduction

Product Overview: The Moving Head DJ Light is a compact fixture with dimensions of 3.9″ x 7.1″ x 5.5″ and weighs 4.8 pounds.

Setup

AC Power: The light operates on an input voltage range of 110 to 240 VAC, 50/60 Hz. Refer to the label on the back panel for power requirements.

Mounting: Before mounting, follow safety recommendations. The light can be mounted in any position with proper ventilation.

Operation

Control Panel Operation: Use the four buttons under the display to access functions. Buttons include select, scroll up, scroll down, and activate.

System Menu Options:

• A001-A512: DMX Address Setting
• Chnd: Channel Mode (14CH, 18CH)
• nast d512: Master Slave
• Shnd Auto Sens Led dISP Pan: Additional settings

FAQ

Q: Can I repair the fixture myself?

A: It is advised not to attempt repairs yourself as unskilled attempts may cause further damage. Contact an authorized technical assistance center for repairs.

Q: What is the power supply range for the Moving Head DJ Light?

A: The light operates with an input voltage range of 110 to 240 VAC, 50/60 Hz.

Q: How do I know if my unit needs servicing?

A: In case of serious operating problems, stop using the fixture immediately and contact technical support for assistance.

Before You Begin

What In the Box

• 1 x Moving Head Lights
• 1 x Power Cable
• 1 x Bracket
• 2 x Screw
• 1 x IR Remote Controller
• 1 x User Manual

Unpacking Instructions:
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Caution
There are no user serviceable parts inside the fixture.
Do not open the housing or attempt any repairs yourself. In the unlikely situation, your unit may require service, please contact us: info@oppsk.com

Disclaimer:
LaluceNatz believes that the information contained in this manual is accurate in all respects. However, LaluceNatz assumes no responsibility and specifically disclaims any
and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. LaluceNatz reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, LaluceNatz has no obligation to make, and does not commit to make, any such revisions.

Safety Introductions:
Please keep this User Manual for future consultation. Unpack and check carefully there is no transportation damage before using the fixture.

• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the fixture.
• It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
• Disconnect main power before servicing and maintenance. Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only, but always by taking its base.
• Maximum ambient temperature is Ta : 104℉/40℃. Don’t operate it where the temperature is higher than this.
• In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
• Do not connect the device to any dimmer pack.
• Do not touch any wire during operation and there might be a hazard of electric shock.
• To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
• The housing must be replaced if they are visibly damaged.
• Do not look directly at the LED light beam while the fixture is on.

Introduction

Product Overview & Size

Setup

AC Power:
The Moving Head DJ Light has an auto-ranging power supply and it can work with an input voltage range of 110 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

Mounting:
Before mounting the product, read and follow the safety recommendations indicated in the Safety Introductions.

Orientation:
The Moving Head DJ Light may be mounted in any position; however, make sure adequate ventilation is provided around the product.

Operation:

Control Panel Operation:
To access the control panel functions, use the four buttons located underneath the display.

out of the current menu option