PPSK MHW19-R 19×15W Beam Wash Moving Head Light User Manual
- June 22, 2024
- PPSK
Table of Contents
PPSK MHW19-R 19×15W Beam Wash Moving Head Light
Specifications
- DMX Settings
- Manual Control
- Factory Reset
- Language Selection: Chinese/English
- Software Version: 06MH
Product Usage Instructions
Display Panel and Key Definitions
- Menu key: Select function
- Up key: Parameter increment
- Down key: Decreasing parameters
- Confirmation key: Confirm and save
Menu Functions
After the machine is reset, press the menu key to enter the main menu. You
will have 30 seconds on the main menu interface. Select from the main menu
options and navigate through the function parameters of each menu using the up
and down keys. Press the confirmation key to save the current function
parameters (power loss memory after saving).
Primary Menu Submenu
- System Settings: DMX address, encoder, X/Y reversal, etc.
- Running Mode: Channel selection, speed adjustments, color settings, etc.
- Manual Control: Fine tuning, focusing, dimmer control, etc.
Frequently Asked Questions (FAQ)
-
How do I change the DMX address?
- To change the DMX address code, use the up or down keys to select the desired address code (001-512) and press the confirmation key to save. The default address is 001.
-
How can I adjust the RGBW settings?
- You can modify the RGBW parameters by using the up or down keys to adjust values within the range of 000-255. Press the confirmation key to save the changes. Default values are provided for each parameter.
19 BEAM WASH MOVING HEAD LIGHT
USER MANUAL
At first, thank you for purchasing the device. For the sake of safety and regular operation of this projector, please read this manual carefully before using and operating it in order to avoid any personal injury or damage to the device.
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
CAUTION: Keep this equipment away from rain, moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this
equipment should
- Be competent
- Follow the instructions of this manual
CAUTION: Take care using this equipment! high voltage-risk of electric shock!!
Before your initial start-up, please make sure that there is no damage caused
during transportation. Should there be any, consult your dealer and do not use
the equipment.
To maintain the equipment in good working condition and to ensure safe
operation, it is necessary for the user to follow the safety instructions and
warning notes written in this manual. Please note that damages caused by user
modifications to this equipment are not subject to warranty.
ATTENTION
DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE!
RISK OF SHORT CIRCUIT!
CAUTION: DO NOT OPEN THE HOUSING SHOCK HAZARD
IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unatu horized modification to the equipment.
-
Display panel and Key definition
Menu key : Select function
Up key : parameter increment
Down key: Decreasing parameters
Confirmation key : Confirm and save -
Menu Function
After the machine is reset, press the menu key and enter the main menu (exit after 30 seconds on the main menu interface), see the main menu function table (5 main menu options); select the main menu up or down, enter the function parameters of each menu, and then press the confirmation key to save the current function parameters (have the power loss memory after saving).
| primary menu | submenu | Menu function description |
|---|---|---|
| 1、System Settings | 1、DMX address | Change DMX address code ( address code |
optional range 001 – 512 ), confirm key save , default 001 .
2、encoder| Up or down to modify the encoder on / off , confirm the key
to save , turn on by default .
3、X reversal| Modify up or down X reverse on / off , confirm the key
is saved , off by default .
4、Y reversal| Modify up or down Y reverse on / off , confirm the key
is saved , off by default .
5、Improve thsetting|
2、running mode| 1、running mode| Up or down select running mode DMX / voice
/ automatic , confirm key save , default DMX . 。
2channelselection| Select channel CH24 / CH32 up or down , confirm key
save , default CH24 .
3、 manual control| 1、X| Modify parameter values up or down ( adjustable
range 000 – 255 ), confirm key save , default 000 .
2、X fine tuning| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
3、Y| Modify parameter values up or down ( adjustable range 000 – 255
), confirm key save , default 128 .
4、Y fine tuning| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
5、XY Speed| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
6、Focusing| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
7、Dimmer| Modify parameter values up or down ( adjustable range 000 –
255 ), confirm key save , default 255 .
8、Strobe| Modify parameter values up or down ( adjustable range 000 –
255 ), confirm key save , default 000 .
9、RGBW strobe| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
10、RGBW-red| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 255 .
11、RGBW-green| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 255 .
12、RGBW-blue| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default255 .
13、RGBW-white| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 255 .
14、RGBW-mode| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
15、RGBW-speed| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
16、RGB-strobe| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
17、RGB -red| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 255 .
| 18、RGB-green| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 255 .
---|---|---
19、RGB-blue| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 255 .
20、RGB-mode| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
21、RGB-speed| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
22、Back colour| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
23、Back dimmer| Modify parameter values up or down ( adjustable range 000
– 255 ), confirm key save , default 000 .
24、Reset| Modify parameter values up or down ( adjustable range 000 –
255 ), confirm key save , default 000 .
4、Display settings| 1、language selection| Select Chinese / EN (
English ) up or down , confirm the key to save , default Chinese
.
2、Inverted setting| Select off / On up or down , confirm that the key
is saved and close by default .
3 、Screenguarantee Settings|
4、software version| 06MH
5、Factory setting| Show:Please enter the password! Change up or down to 138,
and then press the confirm key to enter the factory setting.| 1 、X-axis
calibration
| Modify parameter values up or down ( adjustable range 000 – 255
), confirm key save , default 128
2 、Y-axis
calibration
| Modify parameter values up or down ( adjustable range 000 – 255
), confirm key save , default 128 .
3 、 Zoom
calibration
| Modify parameter values up or down ( adjustable range 000 – 255
), confirm key save , default 128 .
4、red| Modify the red bead current (032-255), confirm the key is saved,
default 230.
5、green| Modify the gren bead current (032-255), confirm the key is saved,
default 230.
6、blue| Modify the blue bead current (032-255), confirm the key is saved,
default 230.
7、white| Modify the white bead current (032-255), confirm the key is saved,
default 230.
8、X current| Modify parameter values up or down ( adjustable range 000
– 007 ), confirm key save , default 004 .
9、X speed| Modify parameter values up or down ( adjustable range 000 –
007 ), confirm key save , default 000 .
10、Y current| Modify parameter values up or down ( adjustable range 000
– 007 ), confirm key save , default 004 .
11 、Y speed| Modify parameter values up or down ( adjustable range 000
– 007 ), confirm key save , default 000 .
12、Logo| Select 000 / 001 up or down , confirm key save , default
000 .
13、temperature| Modify the temperature parameter up or down ( range 045
– 075 ), confirm key save , default 065
14、
Temperature-fan
| Select off / on fan control up or down , confirm that the key is
saved and turn off by default .
15、LED| LEDA – LEDB
Master-slave control
There are two or more identical lamps connected by DMX three-core signal
lines. All lamps are set to any address code of A001~A512, any one is set as
the host, and other lamps are slaves. All slave displays do not flash. When
adjusting the gradient, pulse, pulse, sound control and self-propelled effects
with the host, all slave synchronous gradient, pulse, jump, sound control and
self-propelled effects. Special attention
- Only one host can be set up in a group of lamps. If there are multiple hosts, all lamps will flash and not be synchronized .
- All lamps must work only when the master-slave machine is turned off when the DMX512 console is turned off.
DMX512 console
After powering on, set the address code of all lamps, and then connect all
lamps to the DMX512 console in parallel with a three-core signal line, and the
address code will stop flashing, indicating that the DMX512 console signal has
been sent to the lamp. According to the instructions of each channel, use the
DMX512 console to control the relevant functions .
24Channel descriotion
| CH | Value | function |
|---|---|---|
| 1 | 000-255 | x-axis |
| 2 | 000-255 | x axis fine-tuning |
| 3 | 000-255 | Y-axis |
| 4 | 000-255 | Y axis fine-tuning |
| 5 | 000-255 | XY speed |
| 6 | 000-255 | focusing |
| 7 | 000-255 | dimmer |
| 8 | 000-255 | stroboe（Main light and auxiliary light） |
| 9 | 000-255 | stroboe（Main light） |
| 10 | 000-255 | R |
| 11 | 000-255 | G |
| 12 | 000-255 | B |
| 13 | 000-255 | W |
| 14 | 000-255 | mode |
| 15 | 000-255 | speed |
| 16 | 000-255 | stroboe（auxiliary light） |
| 17 | 000-255 | R |
| 18 | 000-255 | G |
| 19 | 000-255 | B |
| 20 | 000-255 | mode |
| 21 | 000-255 | speed |
| 22 | 000-255 | background colour |
| 23 | 000-255 | Background color total dimming |
| 24 | 000-255 | reset : The parameter value is reset at 250-255 , The |
console parameter value must be pulled below 10 and then pushed to 250-255 to be useful . The parameter value is useless at 000-249 and cannot be reset .
22Channel dacerintion
| CH | Value | function |
|---|---|---|
| 1 | 000-255 | x-axis |
| 2 | 000-255 | x axis fine-tuning |
| 3 | 000-255 | Y-axis |
| 4 | 000-255 | Y axis fine-tuning |
| 5 | 000-255 | XY speed |
| 6 | 000-255 | focusing |
| 7 | 000-255 | dimmer |
| 8 | 000-255 | stroboe（Main light and auxiliary light） |
| 9 | 000-255 | stroboe（Main light） |
| 10 | 000-255 | R1 |
| 11 | 000-255 | G1 |
| 12 | 000-255 | B1 |
| 13 | 000-255 | W1 |
| 14 | 000-255 | R2 |
| 15 | 000-255 | G2 |
| 16 | 000-255 | B2 |
| 17 | 000-255 | W2 |
| 18 | 000-255 | R3 |
| 19 | 000-255 | G3 |
| 20 | 000-255 | B3 |
| 21 | 000-255 | W3 |
| 22 | 000-255 | mode |
| 23 | 000-255 | speed |
| 24 | 000-255 | stroboe（auxiliary light） |
| 25 | 000-255 | R |
| 26 | 000-255 | G |
| 27 | 000-255 | B |
| 28 | 000-255 | mode |
| 29 | 000-255 | speed |
| 30 | 000-255 | background colour |
| 31 | 000-255 | Background color total dimming |
| 32 | 000-255 | reset: The parameter value is reset at 250-255 , The |
console parameter value must be pulled below 10 and then pushed to 250-255 to be useful . The parameter value is useless at 000-249 and cannot be reset .
technical parameters
- Voltage : AC100~240V 50/60HZ
- Lamp beads: 19pcs four-in-1 LED beads
- Control mode : DMX512, self-propelled, master-slave, Sound-activated, RDM.
- Channel: CH24Channel,CH32Channel.
- Dimming : 32bit 0~100%
- linear dimming Features : Dyeing+ Explosion+ focus
- Strobe frequency : 1~30HZ
- Connection method: DMX512 input and output / power input and output.
- IP rating: IP20
CAUTION: Keep this equipment away from rain, moisture and liquids.
Attention
- Keep the voltage of the power supply with the master light
- Do not connect with other electric cable and the DMX512 signal cable To ensure the earthing conductor of the switch well before connecting with AC110v~240v
- The earthing conductor is the yellow and green.
- When you move or install, to avoid the metal to knock the light
ATTENTION: DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE!
RISK OF SHORT CIRCUIT!
Notice
- Be sure to follow figures 2 & 3 when making your own cables.
- Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing
- Grounding the shield could cause a short circuit and erratic behaviour.
DMX Sianal Connection
3-Pin XLR to 5-Pin XLR Conversion
Conductor| 3-Pin XLR Female(OUT)| 5-Pin XLR Male (IN)
Ground/Shield| Pin 1| Pin 1
Data Compliment (-signal)| Pin 2| Pin 2
Data True (+signal)| Pin 3| Pin 3
Not Used| | Pin 4-Do Not Used
Not Used| | Pin 5-Do Not Used
MAINTENANCE
Attention
- Periodical to maintain the light
- Check the screw of the spare parts in order to use well
- Clearing the dust and fragments of the inner light, to keep the inner par light clearly
- Clearing the lens
- More dust, smoke and granular can cause appearance of the light corrosively, even cause overheated to damage equipment
- Attention :Before take the light apart, please cut the power source.
CAUTION: Take care using this equipment! high voltage-risk of electric shock!
Clearing
- Cutting the power source when the light is cool, to move the cover of the light
- Using the vacuum cleaner or the gas from air compressor to remove the dust of the appearance of the light
- The lens need clearly once every week, otherwise to reduce the bright.
- The fans need clear once every month, to promise the cool effect.
- Clearing the lens must be take care, because the surface of the lens is easy to damage and cutting, and do not use the liquid to clean
- The PCB do not use the liquid to clean, must be keep it dry, to avoid short circuit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>