Danfoss AK-PC Remote Connection to AK-PC Pack Controller Installation Guide
- June 1, 2024
- Danfoss
Table of Contents
Danfoss AK-PC Remote Connection to AK-PC Pack Controller
Instruction For Use
-
For a new site, start by opening Service Tool and select Add button at bottom.
-
Configure site setup details, general example below. Ensure network team has opened TCP port (default 1041) for specific IP address.
Site Name : User Preference
Site location : User Preference
Site Type: User Preference
Destination Name: User Name of System Manager credentials
Pass code : Password of System Manager credentials
Channel : Set as TCP/IP
Enhanced Security: Network-based, may be on / off
IP address : IP of System Manager used for tunneling
TCP port : Port used for tunneling, must be open on network (default 1041 typically used)
Notes: -
For sites with multiple system managers, a separate site must be configured in Service Tool per system manager
-
Ensure IT/network team has opened TCP port for each system manager/IP address used for tunneling
-
If user feels setup is correct and unable to connect, try toggling Enhanced Security
-
User must have Supervisor-level system manager credentials to tunnel in
-
Once connection has been created, select from site selection list and press Connect button.
-
Software will now tunnel into Service Tool. Once screen showing pack controller appears (see below), press on icon in left column of pack controller row.
-
This will now bring user to standard pack controller overview screen, where they can navigate same as a local connection.
Customer Support
DanfossA/S
Climate Solutions• danfoss.com • +45 7488 2222
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/5 or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/5. All
rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>