COMMSCOPE 760255076 Propel Single Mode Splice Cassette User Guide
- June 1, 2024
- CommScope
Table of Contents
COMMSCOPE 760255076 Propel Single Mode Splice Cassette
Specifications
- Product Brand: Propel
- Product Series: PPL
- Color (Front): Blue
- Interface (Front): LC/UPC
- Interface (Rear): Ribbon pigtail
- Polarity: Pairs, straight
- Total Fibers: 12
- Dimensions: Height 67.31 mm (2.65 in) x Width 97.993 mm (3.858 in)
- Optical Specifications: Singlemode G.657.A2, Insertion Loss maximum 0.25 dB
- Qualification Standards: IEC 61753-1, TIA-568.3-D
- Safety Standard: UL
Product Usage Instructions
Installation and Removal
The component can be installed and removed from the front or rear of the
panel. It requires 3 of the 12 lanes on the Propel Panel blade.
Optimal Design Features
- Application: Single fusion splices
- Splicing Type: Heat shrink, single fiber fusion
- Dimensions: Length 45 mm (1.772 in)
Fiber Cassette with Pigtails Usage
- Ensure the panel blade has available lanes for the component.
- Insert the cassette carefully either from the front or rear of the panel.
- Connect the LC/UPC interface on the front side as needed.
- Make sure to follow proper polarity alignment for straight pairs.
- Verify insertion loss does not exceed 0.25 dB for optimal performance.
FAQ
-
Q: Can the Fiber Cassette with Pigtails be used outdoors?
A: The product is suitable for indoor use only. -
Q: What is the maximum number of fibers this product can accommodate?
A: The Fiber Cassette with Pigtails can accommodate a total of 12 fibers.
760255076 | PPL-SP-12LC-SM-PT-AS
- Propel Singlemode Splice Cassette, 12LC/UPC with internal shutters, 250 μm OS2 single fiber pigtails, pairs straight ULL
- Can be installed and removed from front or rear of panel
- This component requires 3 of the 12 lanes on the Propel Panel blade
Product Classification
- Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
- Portfolio SYSTIMAX®
- Product Type Fiber cassette with pigtails
- Product Brand Propel
- Product Series PPL
General Specifications
- Color, front Blue
- Interface, front LC/UPC
- Interface, rear Ribbon pigtail
- Polarity Pairs, straight
- Shuttered Yes
- Total Fibers, quantity 12
Dimensions
- Height 67.31 mm | 2.65 in
- Width 97.993 mm | 3.858 in
Optical Specifications
- Fiber Mode Singlemode
- Fiber Type G.657.A2
- Insertion Loss, maximum 0.25 dB
Environmental Specifications
- Qualification Standards IEC 61753-1 | TIA-568.3-D
- Safety Standard UL
Packaging and Weights
Included Mass Fusion Splice Protection Sleeves
Packaging quantity 1
Included Products
103897-000 SMOUV-1120-02 – SMOUV Fiber Optic Splice Heat Shrink
Protective Sleeve for FIST Trays, pack of 100 pcs
103897-000 | SMOUV-1120-02
- SMOUV Fiber Optic Splice Heat Shrink Protective Sleeve for FIST Trays, pack of 100 pcs
- Provide mechanical and environmental protection for fusion splices
- Optimal design for simple and correct fiber entrance
- Hot melt adhesive especially developed for optimal flow
- Transparent heat shrinkable tube for simple installation verification
- Short installation cycle and compatible with most common ovens
Product Classification
- Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
- Product Type Fiber protection sleeve
- Product Brand SMOUV®
- Product Series SMOUV
- Ordering Note Minimum order quantity (MOQ) is 1,000 pcs
General Specifications
- Application single fusion splices
- Splicing Type Heat shrink, single fiber fusion
Dimensions
- Length 45 mm | 1.772 in
Outline Drawing
Environmental Specifications
Environmental Space Indoor | Outdoor
Packaging and Weights
Packaging quantity 100
Packaging Type Bag | Carton
Regulatory Compliance/Certifications
- Agency Classification
- CHINA-ROHS Below maximum concentration value
- ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
- REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
- ROHS Compliant
- UK-ROHS Compliant
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: October 12, 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>