RBROHANT JK0316 Freestanding Outdoor Shower Nickel User Manual
- June 1, 2024
- RBROHANT
Table of Contents
RBROHANT JK0316 Freestanding Outdoor Shower Nickel
CERTIFICATES
BEFORE INSTALLATION
- This product has been inspected and debugged by the factory to the best condition. Please do not disassemble and assemble it yourself.
- Before installing the product, please be sure to remove sundries and sludge from the water pipe to prevent sundries from blocking the product.
FreestandIng Bathtub Faucet Manual
- Please check everything component by the list below after you open the package, make sure nothing missing, any questions please contact us feel free, we will reply within 24 hours. and solve the issue together with you.
Parts Description
INSTALLATION STEPS
Schematic diagram of Bottom plate
- Make grooves according to the dimensions in the drawing, and bury hot and cold water inlet pipes.
- After the concrete is dry, punch eight 6mm expansion screw holes according to the dimensions in the drawing, and respectively punch eight screws.
- Insert the decorative cover into the main body straight pipe, and the height shall be subject to the best installation.
- Screw the bottom plate into the main body straight pipe;
- Connect water inlet nuts to hot and cold water pipes according to the red and blue labels. Please pay attention to the outlet direction of the faucet, insert the bottom plate into the corresponding expansion screw.
- Tighten the eight expansion screws.
- Insert the curved pipe into the heighten straight pipe and tighten the M5 screw.
- Screw the nut of the water inlet pipe into the corresponding straight pipe interface, and tighten the M5 screw after adjusting the outlet direction of the faucet.
INSTALLATION DIMENSION
- Screw the rain shower head into the curved pipe interface, and screw the shower hose into the bracket to connect the hand shower. The faucet is installed.
CLEANING CARE
In order to keep the appearance of product clean, bright and good performance, please take care of the product as follows;
- Rinse with water only and dry with soff cotton cloth;
- Use mild liquid and colorless glass cleaner to remove surface dirt and scale film, or use polish without abrasive effect;
- Do not use abrasive deterfgent, polish, emery cloth, paper towel or scraper, etc;
- Do not use acid cleaner, or cleaner and soap with insoluble gran etc;
- In the process of use, mud my accumulate in the bubbler and make the water flow show, The bubbler can be unscrewed, rinsed with water, and then installed back in place.
Please feel free to contact us if you have any questions. We will help to solve the issue together with you. OUR EMAIL: services@rbrohant.com
Read User Manual Online (PDF format)
Loading......