CommScope XP-2525-OFF Bolt Style Crossover Plate User Guide
- June 1, 2024
- CommScope
Table of Contents
CommScope XP-2525-OFF Bolt Style Crossover Plate User Guide
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X.XX]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
- PACKAGING SHALL MEET COMM SCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
- PRINTED DOCUMENT TO BE PLACED INSIDE POLY BAG AND THEN IN SHIPPING CONTAINER.
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
TABLE: CONFIGURATIONS
PART NO| DESCRIPTION| INCLUDED PARTS
XP-2525-OFF| OFFSET CO PLATE KIT,2-7/8ODX2-7/8OD| XPU01-OFF-00| GUB-4352
1| 4
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>