breeze33 BZ33-INV60OUT2-J 60K BTU Hyper Pro Inverter Instructions
- June 1, 2024
- breeze33
Table of Contents
breeze33 BZ33-INV60OUT2-J 60K BTU Hyper Pro Inverter
REPLACEMENT PARTS
| Part # | Replacement Part | Part Name | Qty |
|---|---|---|---|
| 1 | 11201007003425 | Ambient temperature sensor subassembly | 1.0 |
| 11201008000773 | Pressure sensor | 1.0 | |
| --- | --- | --- | --- |
| 2 | 15822000015087 | Condenser assembly | 1.0 |
| pressure valve subassembly | 1.0 | ||
| 2 | 15822000013007 | Condenser assembly | 1.0 |
| pressure valve | 1.0 | ||
| 3 | 15822000015087 | Condenser assembly | 1.0 |
| control box subassembly | 1.0 | ||
| 4 | 11201007003441 | Outdoor pipe temperature sensor subassembly | 1.0 |
| 12222000012372 | Electrical installation plate assembly | 1.0 | |
| 5 | 12222000013365 | Handle assembly | 1.0 |
| module subassembly | 1.0 | ||
| 6 | 12222000012373 | Rear right side plate assembly | 1.0 |
| 12122000020943 | Electronic installing box | 1.0 | |
| 6.1 | 12100702000038 | Handle | 1.0 |
| control board subassembly | 1.0 | ||
| 8 | 12122000014023 | Water collector | 1.0 |
| connection cable | 1.0 | ||
| 9 | 12222000006287 | Front clapboard assembly | 1.0 |
| Electronic installing box | 1.0 | ||
| 10 | 12222200002361 | Valve plate | 1.0 |
| control box terminal board assembly | 1.0 | ||
| 11 | 12222000013910 | Fixing plate on chassis | 1.0 |
| Terminal block | 1.0 | ||
| 12 | 12222000017025 | Partition board subassembly | 1.0 |
| Terminal board assembly | 1.0 | ||
| 13 | 15500508001475 | Accumulator cylinder | 1.0 |
| Inverter module subassembly | 1.0 | ||
| 15 | 12222200002363 | Left supporter | 1.0 |
| suction pipe subassembly | 1.0 | ||
| 16 | 12222000014845 | Air outlet grille | 2.0 |
| switch | 1.0 | ||
| 17 | 12222000007564 | Front panel | 1.0 |
| electric heater | 1.0 | ||
| 18 | 12100105000022 | Axial flow fan | 2.0 |
| heater of chassis | 1.0 | ||
| 19 | 11002015009825 | Outdoor fan motor | 2.0 |
1.0
20| 12222000016092| Motor bracket assembly| 1.0| | 46| 11201007000136|
Outdoor pipe temperature sensor subassembly| 1.0
21| 15500406000010| Copper nut| 1.0| | 47| 11201007003445| Outdoor pipe
temperature sensor subassembly| 1.0
22| 11201007003124| Discharge temperature sensor assembly| 1.0| | 50|
12222000007944| Rear grille| 1.0
23| 12222200002359| Top cover assembly| 1.0| | 51| 15422000022897| Electronic
expansion valve subassembly| 1.0
24| 11103020006399| Compressor| 1.0| | 52| 15700101001416| Heat exchanger
assembly| 1.0
25| 15122000031463| Compressor discharge pipe subassembly| 1.0| | 52.1|
15422000022915| Electronic expansion valve subassembly| 1.0
25.1| 17400516000851| Pressure switch| 1.0| | 52.1.1| 15500213000865|
Electronic expansion valve| 1.0
26| 15422000022895| 4-Ways valve or gas valve assembly| 1.0| | 53|
15123100000608| Evaporator connecting pipe subassembly| 1.0
26.2| 15500204000027| Gas valve| 1.0| | 53| 15123000012948| Evaporator
connecting pipe subassembly| 1.0
26.3| 15500216000681| 4-Way valve| 1.0| | | | |
- Due to continuing product improvements, specifications may change without notice. Visit breeze33.com for current product information.
Product Specifications
- Factory Code : 22023116000281
- Model : BZ33-INV60OUT2-J
- Optional Function Parts : .3592667
Frequently Asked Questions (FAQ)
Q: Can I use non-OEM replacement parts for this inverter?
A: It is recommended to use genuine replacement parts to ensure
compatibility and optimal performance.
Q: How often should I clean the condenser assembly?
A: The condenser assembly should be cleaned at least once every six months
to maintain efficiency.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>