SEWOSY EF150 Surface Electromagnetic Lock Installation Guide

June 1, 2024
SEWOSY

SEWOSY EF150 Surface Electromagnetic Lock

Specifications

  • Input Voltage: 12V DC or 24V DC
  • Current: 480 mA
  • Max Holding Force: 150 DaN
  • Power Consumption: 6 W
  • Operating Temperature: -15°C to +20°C

Product Usage Instructions

General Installation Instructions

  • Use this equipment only for an adapted application.
  • The manufacturer cannot be held responsible for possible damage caused when usual security requirements are not fulfilled.
  • Mounting, maintenance, and repair must be carried out by skilled and authorized staff.

Connection

  • Ensure correct polarity when connecting the device.
  • Use the specified input voltage (12V DC or 24V DC).
  • Check jumper settings before connecting the lock to its power supply.
  • Incorrect polarity, wrong input voltage, or wrong jumper position may damage the product and void the warranty.

Mounting Under Push Door Frame:

  • Make sure to observe perfect alignment between the armature plate and magnet.

Frequently Asked Questions (FAQ)

  • Q: What is the input voltage for this product?
    A: The input voltage options are 12V DC or 24V DC.

  • Q: What is the maximum holding force of the product?
    A: The maximum holding force is 150 DaN.

  • Q: What should I do if the product is damaged due to incorrect installation?
    A: The manufacturer is not responsible for damage caused by incorrect installation. Ensure installation is done by skilled personnel.

INSTALLATION INSTRUCTIONS

SURFACE ELECTROMAGNETIC LOCK

EF150 – EF150CTC EF150-2 – EF150-2CTC

SEWOSY-EF150-Surface-Electromagnetic-Lock- \(1\)

(*) Forces de retenue maximales pour des mises en œuvre respectant les conditions de pose optimales Maximal theoretical holding forces for implementations fulfilling optimal installation conditions

SEWOSY-EF150-Surface-Electromagnetic-Lock- \(2\)

GENERAL INSTALLATION INSTRUCTIONS

  • Use this equipment only for an adapted application.
  • The manufacturer cannot be held responsible for possible damage caused when usual security requirements are not fulfilled.
  • Mounting, maintenance and repair must be carried on by a skilled and authorized staff.

DIMENSIONS

SEWOSY-EF150-Surface-Electromagnetic-Lock- \(3\)

RACCORDEMENT CONNECTION

SEWOSY-EF150-Surface-Electromagnetic-Lock- \(4\)

Attention – Caution

  • Make sure to observe correct polarity.
  • Use correct input voltage as specified.
  • Check jumper settings before connecting the lock to its power supply.
  • Incorrect polarity, wrong input voltage or wrong jumper position may damage the product. These failures are not covered by the product warranty.
  • Check for perfect alignement between armature plate and magnet.

 INSTALLATION DIAGRAMS

SEWOSY-EF150-Surface-Electromagnetic-Lock- \(5\)

CONFIGURATIONS DE POSE INSTALLATION DIAGRAMS MONTAGEZEICHNUNGEN MONTAGE CONFIGURATIES SEWOSY-EF150-Surface-Electromagnetic-Lock-
\(6\)

MOUNTING UNDER DOUBLE PUSH DOOR FRAME

OTHER MOUNTING TYPES WITH ACCESSORIES

SEWOSY-EF150-Surface-Electromagnetic-Lock- \(7\) SEWOSY-EF150-Surface-Electromagnetic-Lock- \(8\)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals