SEWOSY SHOKV1 Alarm Button Green with LED Indication and Alarm Signal Instruction Manual
- June 10, 2024
- SEWOSY
Table of Contents
**SEWOSY SHOKV1 Alarm Button Green with LED Indication and Alarm Signal Instruction Manual
**
REFERENCES
References | Designation |
---|---|
SHOKV1 | Manual call point 1 contact |
SHOKV2 | Manual call point 2 contacts |
SHOKV3 | Manual call point 2 contacts and Buzzer / LED |
SHOKV4 | Manual call point 2 contacts with cover opening detection and |
Buzzer / LED
TECHNICAL SPECIFICATIONS
General specifications of the manual call point
- Operating voltage : 12-24V DC (+10%)
- Consumption : 12V DC – max. 45 mA / 24V DC – max. 62 mA
- Switching rate (C/NO/NC) : 250V AC – 5 A / 30V DC – 4 A
- IP rating : IP 40 uniquement only for indoor use
- Conductor’s cross section : max 1 mm²
- Operating temperature : 0 / +50°C
- Weight : 0,17 kg
KIT
Reset Key x2
SHOK_K
Protection cover x1
SHOK_C (SHOKV1 – V2 – V3) SHOK_P
SHOK_CA (SHOKV4)
Cover screw for surface mounting x1
K30x25
Cover screw and nut for semi-flush mounting x1
M3x16 M3
Green plastic seal x1
SHOK_P
MOUNTING
Semi-flush mounting
Surface mounting
Surface mounting possible with standard 60 mm outlet box
Mounting of the cover
Surface mounted
Semi-flush mounted
CABLE DUCT ENTRY
MANUAL CALL POINT RESET
Front reset
OR
Reset below
RESET KEY SLOTS
CONNECTION
Connecting whilst switched on
Connecting whilst disarmed (factory setting)
The electronic board is fixed to the manual call point. Do not remove it!
JUMPER CONFIGURATIONS
SHOKV3
Jumper | STATE OF THE BUZZER |
---|---|
When triggered, the buzzer sounds continuously (ON – 70 dB) | |
Buzzer disabled (OFF) |
STATE OF THE LEDs
- Call point switched on: Green
- Call point disarmed: Red
SHOKV4
Jumper | STATE OF THE BUZZER |
---|---|
When the cover is opened, the buzzer sounds discontinuously (ON – 70 dB) |
When triggered, the buzzer sounds continuously (ON – 70 dB)
| When the cover is opened, the buzzer is disabled (OFF)
When triggered, the buzzer sounds continuously (ON – 70 dB)
| Buzzer disabled (OFF)
STATE OF THE LEDs
- Call point switched on: Green
- Call point disarmed: Red
- Cover open: Flashing: white
DIMENSIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>