BROWAN TBSL100 LoRaWAN Sound Level Sensor Installation Guide
- June 1, 2024
- BROWAN
Table of Contents
BROWAN TBSL100 LoRaWAN Sound Level Sensor
Revision History
- Revision Date Description
- .001 Aug. 18, 2020 Browan first release
Copyright
2020 BROWAN COMMUNICATIONS INC. This document is copyrighted with all rights
reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in
any form by any means without the written permission of BROWAN COMMUNICATIONS
INC.
Notice
BROWAN COMMUNICATIONS INC. reserves the right to change specifications without
prior notice. While the information in this manual has been compiled with
great care, it may not be deemed an assurance of product characteristics.
BROWN COMMUNICATIONS INC. shall be liable only to the degree specified in the
terms of sale and delivery. The reproduction and distribution of the
documentation and software supplied with this product and the use of its
contents is subject to written authorization from BROWAN COMMUNICATIONS INC.
Trademark
The product described in this document is a licensed product of BROWAN
COMMUNICATIONS INC.
Introduction
Product Design
The Bracket is part of the accessories of the sensor, especially for the
Motion Sensor PIR. The purpose of the bracket is to adjust the sensor at a
specific angle to get more accurate data.
Product Image
Product Features
- Comes with 3M VHB double‐sided tape
- Easy & fast deployment
- Enhance sensor’s installation scenarios
Product Specification
- Material PC+ABS
- Color Grey
- Dimension 53 mm x 31 mm x 31 mm
- Accessories 3M VHB double‐sided tape
Product Application
- Motion Sensor PIR
- Ambient Light Sensor
- Sound Level Sensor
- IR Blaster Sensor
- Grid‐Eye Sensor
- UV Light Sensor
Installation Guide
Step 1
Clean the surface with alcohol. (Suggested by 3MTM.)
Step 2
Tear off the plastic.
Step 3
Stick the bracket at the desired position.
Step 4
Stick the sensor with another 3M VHB double‐sided tape (size not bigger than
30 x 30 mm, or we have this size of tape in stock!)
Step 5
Adjust to the desired angle and stick the sensor on the bracket. Avoid
covering the QR code.
2020 © Browan Communications Inc., All Rights Reserved. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to the products of Browan Communications. Brown may make changes to specifications and descriptions at any time, without notice.
Browan Communications Inc.
- No.15-1, Zhonghua Rd.,
- Hsinchu Industrial Park,
- Hukou, Hsinchu,
- Taiwan, R.O.C. 30352
- Tel: +886-3-6006899
- Fax: +886-3-5972970
- Document Number BQW_02_0022.001
Specifications
- Material: PC+ABS
- Color: Grey
- Dimension: 53 mm x 31 mm x 31 mm
- Accessories: 3M VHB double-sided tape
FAQ
Q: Can the bracket be reused after removal?
A: The bracket may lose adhesive strength after removal, so it is recommended
to use a new bracket for reinstallation.
Q: Is the bracket weatherproof for outdoor use?
A: The bracket is designed for indoor use and may not withstand harsh outdoor
conditions. It is recommended to use it indoors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>