BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Indoor Router User Guide

BROWN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Indoor

Router

Specifications:

• Model: MI14
• Wi-Fi Standard: Wi-Fi 6 (802.11ax)
• Wireless Speed: AX3000
• Radio Bands: Dual-band (2.4GHz and 5GHz)
• Ports: 1 WAN port, 2 LAN ports
• Power: PoE (Power over Ethernet)

Product Usage Instructions

Installing the Wall Mount

1. Measure and secure the mounting bracket to the wall with 4 anchors & short screws.
2. Insert RJ45 cables to the WAN/LAN port of MI14.
3. Turn and secure MI12 to the mounting bracket.

Installing the Ceiling Mount with a Metal Plate

1. Measure and drill 4 6mm holes according to the mounting bracket and attach 4 long screws (not yet fastened for now).
2. Fasten the mounting bracket with a metal plate. Make sure to apply washers, spring washers, and nuts in order.
3. Insert RJ45 cables to the WAN/LAN port of MI14 then turn and secure MI14 to the mounting bracket.

Accessing the AP’s Settings Menu

Method 1:

1. Configure your PC’s IP setting to DHCP to automatically retrieve an IP address.
2. Connect your PC’s Wi-Fi to the SSID printed on the rear of the  AP corresponding to the frequency of connection (2.4G / 5G) using the provided password.
3. Enter the IP address 192.168.2.1 in your browser.
4. In the PRISM login screen, use the following login details: Username: prism, Password: prism

Method 2:

1. Configure your PC’s IP setting to static and set the IP address to any address from 192.168.19.2 to 192.168.19.250.
2. Connect your PC’s network port to the WAN port on the AP.
3. Enter the IP address 192.168.19.1 in your browser.
4. In the PRISM login screen, use the following login details: Username: prism, Password: prism

Method 3:

1. Configure your PC’s IP setting to DHCP to automatically retrieve an IP address.
2. Connect your PC’s network port to any of the LAN ports on the AP.
3. Enter the IP address 192.168.2.1 in your browser.
4. In the PRISM login screen, use the following login details: Username: prism, Password: prism

FAQ

• Q: What should I do if the LED status is not as described in the manual?
  • A: If the LED status does not match the indications provided in the manual, please contact our Worldwide Enterprise Support at +886-3-6006899 or email us at sales@prismwifi.com for assistance.
• Q: How can I upgrade the firmware of my device?
  • A: To upgrade the firmware, wait for the Flash Green / Red every second LED status indication. This signals that the firmware is upgrading. Do not interrupt this process until it is completed.
• Q: Can I use a different mounting method other than wall or ceiling mount?
  • A: For alternative mounting methods, please refer to our support team by contacting us at +886-3-6006899 or emailing  sales@prismwifi.com.

Your AP

No. ****

1| WAN: For PoE Power IN/data transfer
2| LAN: For data transfer
3| Reset
LED Status| ****
---|---
Flash Green / Off every second| The device is boong up
Flash Red / Off every second| The device has lost network connection
Steady Green| The device is operated in standalone mode
Flash Blue / Off every second| The device is connected to PrismX
Steady Blue| The device is operated in cloud mode
Flash Green / Red every second| FW upgrading
|

Accessories

Installing the W t all Mount

1. Measure and secure the mounting bracket to the wall with 4 anchors & short screws.
2. Insert RJ45 cables to the WAN/LAN port of MI14.
3. Turn and secure MI12 to the mounting bracket.

Installing the Ceiling Mount with a Metal Plate

1. Measure and drill 4 Φ6mm holes according to the mounting bracket and attach 4 long screws (not yet fastened for now).
2. Fasten the mounting bracket with the metal plate. Make sure to apply washers, spring washers, and nuts in order, as below.
3. Insert RJ45 cables to the WAN/LAN port of MI14 then turn and secure MI14 to the mounting bracket.

Accessing the AP’s Songs Menu

Via Wi-Fi

1. Configure your PC’s IP setting to DHCP to automatically retrieve an IP address.
2. Connect your PC’s Wi-Fi to the SSID printed on the rear of the AP that corresponds to the frequency of the connection (2.4G / 5G) using the password “passphrase”
3. Enter the IP address 192.168.2.1 in your browser.
4. In the PRISM login screen use the following login:
   • Username: prism

Via WAN (RJ-45)

1. Configure your PC’s IP setting to static and then set the IP address to any address from 192.168.19.2 to 192.168.19.250.
2. Connect your PC’s network port to the WAN port on the AP.
3. Enter the IP address 192.168.19.1 in your browser.
4. In the PRISM login screen use the following login:
   • Username: prism
   • Password: prism

Via LAN (RJ-45)

1. Configure your PC’s IP setting to DHCP to automatically retrieve an IP address.
2. Connect your PC’s network port to any of the LAN port on the AP.
3. Enter the IP address 192.168.2.1 in your browser.
4. In the PRISM login screen use the following login:
   • Username: prism
   • Password: prism

Contact Us

• Worldwide Enterprise Support : +886-3-6006899
• Email: sales@prismwifi.com
• Manufacturer: Browan Communication Inc.
• Add.: No.15-1 Zhonghua Road, Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, 30352
• Tel. : +886-3-5972970

Regulatory Statements

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

STATEMENT OF RADIATION EXPOSURE:

This equipment complies with the limits of exposure to IC radiation established for an uncontrolled environment. This equipment must be installed and used with a minimum of 20cm distance between the radiation source and your body.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

This device complies with CAN ICES-3 (B)/NMB-3(B).

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Quick Start Guide

Wi-Fi 6 AX3000 Dual-Radio Indoor Router
Model: MI14

Declaration of the Presence Condition of the Restricted Substances Marking

Documents / Resources

| BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Indoor Router [pdf] User Guide
MI14 Wi-Fi 6 AX3000 Dual-Radio Indoor Router, MI14, Wi-Fi 6 AX3000 Dual-Radio Indoor Router, AX3000 Dual-Radio Indoor Router, Dual-Radio Indoor Router, Radio Indoor Router, Indoor Router, Router
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>