Danfoss 013R9433 VHX-MONO Valve Set for Wall Connection Installation Guide
- June 1, 2024
- Danfoss
Table of Contents
Danfoss 013R9433 VHX-MONO Valve Set for Wall Connection Installation Guide
Free connection (left or right) – return always on thermostat side.
Place radiator on floor, with mounted brackets, – fit valve (loose) and measure distance A from valve to floor.
Fit cu-tube in wall and cut. Length = A+B
Use hexagon pads in valve inlets to align radiator on pipes.
Mark position and mount radiator on wall.
Place fitting on pipes and tighten into valve.
Tighten valve to radiator
Preset kv on valve and connect thermostat, if not already done
DanfossA/S
Climate Solutions• danfoss.com • +45 7488 2222
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, on line or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/5 or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/5. All
rights reserved.