Daske N7-2 Shower Shelf Elegant Storage Instruction Manual
- June 1, 2024
- Daske
Table of Contents
Daske N7-2 Shower Shelf Elegant Storage
Mounting instruction
Specifications
| Component | Quantity | Reference |
|---|---|---|
| Bracket | 1 | A |
| Screw | 2 | B |
| Wall Plug | 2 | C |
| Washer | 2 | D |
Installation Steps
- Align the bracket (A) on the wall and mark the drilling points through the holes.
- Drill the holes using an appropriate drill bit. Insert the wall plugs (C) into the holes.
- Secure the bracket (A) to the wall using screws (B) and washers (D).
Important Safety Instructions
- Wear protective eyewear when drilling.
- Ensure the power drill is set to the correct speed to avoid damage.
- Do not drill into electrical wiring or pipes.
Diagram Descriptions
- Step 1 Diagram
- An isometric view of the bracket (A) positioned above a wall mount strip showing the alignment of screw holes. Components D (Washer) x2, A (Bracket) x2, B (Screw) x2, and C (Wall Plug) x2 are indicated.
- Step 2 Diagram
- A power drill aligned to drill into a wall with a warning label cautioning against drilling into hands and electrical wires.
- Step 3 Diagram
- An isometric view of a power drill screwing a screw (B) with a washer (D) into the bracket (A) which is mounted on a wall with wall plugs (C).
- Components Diagram
- A side view of the assembly showing the order of components A (Bracket), B (Screw), C (Wall Plug), and D (Washer) when installed.
FAQ
- What tools do I need for installation?
- You will need a power drill, a drill bit suitable for your wall type, and protective eyewear.
- Can I install the bracket without wall plugs?
- Wall plugs (C) are recommended for secure installation, especially in drywall or masonry.
- How do I know if I’ve drilled deep enough for the wall plugs?
- The drilled holes should accommodate the entire length of the wall plugs (C).
Read User Manual Online (PDF format)
Loading......