Daske Bliss 2 Toilet Paper Holder with Shelf Instruction Manual
- June 1, 2024
- Daske
Table of Contents
Daske Bliss 2 Toilet Paper Holder with Shelf
Mounting Instructions
Step 1: Preparing the Components
- Begin by preparing the components required for the installation.
- The figure illustrates the positioning of a shelf onto a wall mount. Parts are indicated by dashed lines connecting to each component.
Step 2: Drilling the Holes
- Use a drill to make holes in the wall. Ensure you have the correct drill bit for the wall material.
- The diagram shows a drill aligned with the marking on the wall, indicating where to drill.
- Symbols are warning to wear protective eye gear, to check for hidden cables and pipes before drilling, and to ensure that the electrical power is turned off.
Step 3: Attaching the Shelf
- Attach the shelf to the wall mount using the screws provided. An illustration depicts a screwdriver securing screws into the wall mount through the shelf.
- Make sure to tighten the screws so that the shelf is firmly attached.
Specifications
| Part | Quantity |
|---|---|
| A (Screws) | 2 |
| B (Wall Plugs) | 2 |
| C (Shelf) | 1 |
| D (Wall Mount) | 1 |
FAQ
What should I check for before drilling into the wall?
- Always check for hidden cables and pipes and make sure the electrical power is turned off in the area where you are working.
What safety equipment is required during installation?
- Wear protective eye gear while drilling to prevent injury.
How many of each part are included in the package?
- The package includes 2 screws (A), 2 wall plugs (B), 1 shelf (C), and 1 wall mount (D).
How do I ensure the shelf is securely attached?
- Use the provided screws to attach the shelf to the wall mount and tighten them firmly with a screwdriver.
Mounting Instructions
Read User Manual Online (PDF format)
Loading......