TOPENS ERM12 Universal External Receiver User Manual
- June 7, 2024
- Topens
Table of Contents
User Manual of the Universal External Receiver
(Model: ERM12)
Thank you for purchasing the ERM12 universal external receiver. It’s compact, simple to operate, and highly reliable.
-
Definition of the wires:
RED: Positive of the power input. 9-24VDC+.
BLACK: Negative of the power input. 9-24VDC-.
BROWN: Signal output. Normally open to BLACK wire and temporarily closed (500mS) to BLACK wire when the receiver is activated. -
Program the remote to the receiver:
Press and release the Learn button in the receiver, the LED light will be ON, then press the key in the remote twice in 4 seconds, the LED light will flash for 3 seconds and then to OFF. Now the remote has been programmed successfully.
NOTE: Maximum 250PCS remotes can be programmed to the receiver. -
Erase all Remote Codes:
Press and hold the Learn button until the LED light from ON to OFF. Now all remote codes have been erased. -
Wire connection:
For the OPENS gate opener, please connect the receiver to the control
board refer to the chapter “Connection of the control board” of the user
manual of the gate opener.
Connect the external receiver to the door opener if it is with
Aux.9-24VDC output.
e.g. Connect the external receiver to the CRAFTSMAN garage door opener.
(a). Connect the black wire into the “NEC” terminal.
(b). Connect the brown wire into the “CL2” terminal.
(c). Connect the red wire into the “24V” terminal.
e.g. Connect the external receiver to the CHAMBERLAIN garage door opener.
(a). Connect the black wire into the “NEC” terminal.
(b). Connect the brown wire into the “CL2” terminal.
(c). Connect the red wire into the “24V” terminal.
e.g. Connect the external receiver to the GENIE garage door opener.
(a). Connect the black wire into the “COMMON” terminal.
(b). Connect the brown wire into the “PUSHBUTTON” terminal.
(c). Connect the red wire into the “BEAM” terminal.
4.2. Connect the external receiver to the door opener if it
is without
Aux. 9-24VDC output.
In this situation, you need an external 9-24VDC power source to make the
receiver to work with the door opener.
Any questions, please do not hesitate to contact us:
E-mail:support@topens.com
Kindly include your Product Model, Purchasing Date & Site, Order #, **and
your contact information. All your concerns will be replied to within 24
hours.
Tel: +86 (571) 8908 0213 (China)
Mon-Fri 9:00AM-5:30PM (UTC +08:00)**
Documents / Resources
|
TOPENS ERM12 Universal External
Receiver
[pdf] User Manual
Universal External Receiver, ERM12
---|---
|
TOPENS ERM12 Universal External
Receiver
[pdf] User Guide
ERM12 Universal External Receiver, ERM12, Universal External Receiver,
External Receiver, Universal Receiver, Receiver, ERM12 Receiver
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>