JBC HDCT-9A Heavy Duty Soldering Pot Station Instruction Manual
- June 1, 2024
- JBC
Table of Contents
JBC HDCT-9A Heavy Duty Soldering Pot Station
Specifications
HDCT Heavy Duty Soldering Pot Station
- Ref. HDCT-9A (100 V)
- Ref. HDCT-1A (120 V)
- Ref. HDCT-2A (230 V)
Package Dimensions / Weight: (L x H x W)
Complies with CE standards. ESD safe.
- 450 x 345 x 243 mm / 5.90 kg
- 17.72 x 13.58 x 9.57 in / 13.01 lb
Product Usage Instructions
Installation
HDE Heavy Duty Control Unit:
Power Cord is included in the HDE Heavy Duty Control Unit package.
CHB Converter:
Connect the CHB Converter to the HDE Control Unit.
T470 Heavy Duty Handle:
Attach the T470 Heavy Duty Handle to the CTS Solder Pot Stand.
Using the Soldering Pot Station
- Ensure all components are properly connected and assembled according to the Installation instructions.
- Ensure the station is plugged into a suitable power source matching the voltage requirement.
- Allow the station to heat up to the desired temperature for soldering.
- Use appropriate soldering cartridges with the T470 Heavy Duty Handle for soldering tasks.
- After use, allow the station to cool down before storing it.
FAQ
Q: What should I do if the station is not heating up?
A: Check the power source connection and ensure all components are
correctly assembled. If the issue persists, contact customer support.
Q: Can I use any soldering cartridges with the T470 Heavy Duty Handle?
A: No, only cartridges specified for use with the T470 handle should be
used to ensure proper functionality and safety.
Heavy Duty Soldering Pot Station
This Plug & Play Guide corresponds to the following references:
Ref.
HDCT-9A (100 V)
HDCT-1A (120 V)
HDCT-2A (230 V)
Packing List
The following items are included according to purchased station reference:
HDE
Heavy Duty Control Unit ………………………………………………. 1 unit
- Ref. HDE-9UD (100 V)
- Ref. HDE-1UD (120 V)
- Ref. HDE-2UD (230 V)
CTS
Solder Pot Stand ………………………………………………………………….. 1 unit
Handle and Cartridge are not included
CHB
Converter ……………………………………………………………………. 1 unit
Ref. CHB-B
T470
Heavy Duty Handle …………………………………………………………….. 1 unit
Ref. T470-A (cartridge not included)
Installation
Specifications
HDCT
Heavy Duty Soldering Pot Station
- Ref. HDCT-9A (100 V)
- Ref. HDCT-1A (120 V)
- Ref. HDCT-2A (230 V)
Package Dimensions / Weight: (L x H x W)
- 450 x 345 x 243 mm / 5.90 kg
- 17.72 x 13.58 x 9.57 in / 13.01 lb
Complies with CE standards.
ESD safe.
Warranty
Get 2 year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.