SEALEY 502YFK Forestry Kit Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
FORESTRY KIT
MODEL NO: 502YFK
502YFK Forestry Kit
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
Includes helmet, mesh visor and clip-on ear defenders. Helmet conforms to BS EN397. Visor conforms to BS EN1731:2006. Ear defenders conform to BS EN352-3.
CONTENTS
ASSEMBLY
-
Unscrew and remove the cover and clip from the ear defenders.
-
Reassemble using the visor attachment clip.
-
Clip the ear defenders to the helmet.
-
Attach the visor to the visor carrier.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 [email protected]
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
502YFK Issue 2 15/01/24