Pxwaxpy 36800mAh Portable Charger User Manual

Pxwaxpy 36800mAh Portable Charger

Thank you for your purchase!

Dear buyer,
Thank you for your purchase! As a reliable seller, I am committed to providing products and services which make all customers satisfied! Hence, I sincerely hope that such shopping experience can give you a happy memory.
Although your satisfaction is our purpose, some unforeseen circumstances may occur inevitably. Contact us immediately if you aren’t satisfied with our products, you want to offer any suggestions, or you have other requirements on au r services. We promise to try our best to offer a satisfied solution as soon as possible (our email: sztj5201324@l63.com).All the very best wishes to you.
A sincere seller

Product Structure

1. Output(USB-Al/A2)
2. Input (Type-C)
3. Solar panel
4. Battery indicators
5. Solar-charging indicator
6. Switch button
7. Flashlights
8. Compass

Specification

• Battery type: Lithium-ion Polymer Cell
• Solar panel specification: 107X61MM(l.5W)
• Temperature for use: -5°C~+50° C
• lnput{Type-C): 5V 3.0A(Max)
• Output{USB-Al): 5V=3.1A{Max)
• Output{USB-A2): 5V=3.1A{Max)
• Full charging time: 5-9 hours{Depends on the power of the adapter)
• Circulate service life: >500times
• Size: (L)l40X(W)78X(H)20{mm)
• Weigh: 260g

Instructions for use:

The flashlight’s turn on and off
Long press the button 4S,flashlight tum on, Long press the button 4S again, flashlight tum off.

Short press once display the remaining power
The 4 LED indicator shows the power status below:

Charge the power bank through power adapter
This power bank comes with one Type-C input port, connect with the phone power adapter charge forth is power bank, the LED power indicator light flash when charging, 4 LED power indicator light keep ON when full charged.

Charge the power bank through sunlight
Put the power bank’ s solar panel under the sunlight’s vertical irradiation or sunny environment {Avoid high temperature, battery may damaged under high temperature condition), the power bank will charge itself by absorbing the sunlight, the solar charging indicator become green at this moment, that means the power banks is being charged by sunlight.

Please Know:
The solar panel’s output power depends on the panel’s power itself and sunlight irradiate intensity etc. Due to the natural limitation such as day and night, seasons, geographical latitude, altitude and sunny, cloudy, raining random factors, so the solar irradianceon the ground is unstable, intermittent. During 10:00AM to 3:00 PM, the atmospheric mass is AM 1.5, irradiate intensity is 1000W/M2, temperature is 25°(, solar panel’s output power reach the maximum under this condition.

Charge for cell phones, ipad and other digital products
The power bank has 2 USB-A Outputs, connect the digital product with any output port, it can charge for the digital product, when the digital product is full charged, please stop charging to the digital device, and the LED power indicator off.

Please stop to use the power bank once bulge or leakage phenomenon happens..

Low battery alarm
When the battery power is less than 10%, the product will enter the low voltage alarm mode, at which time the first LED power indicator starts blinking. By continuing to charge other devices, LED power indicator light will blink until the no-power shutdown; If there is no access to the charging device, 30 seconds after flashing off.

Precautions

• For the first use, please fully charge the product;

• lf the product has abnormalities such as battery expansion, leakage, deformation, water immersion, or short circuit, stop using it immediately;

• Do not drop or use this product in high temperature, humid, strong magnetic environment;

• Keep this product out of the reach of children;

• Do not leave this product in the car, the closed high temperature environment will cause damage to this product;

• When charging is completed, please unplug the connection line in time to avoid loss;

• When the product enters the protection state due to short circuit, over-discharge, etc.
  (the performance is that the product has no output), it can be reactivated by shortly pressing the switch button. If it is invalid, please connect to the external power adapter for charging to recover;

• Do not use an all-in-one data cable to charge multiple devices at the same time to prevent damage to the devices;

• This product has a built-in over-temperature protection function. When the ambient temperature exceeds the normal use temperature range, over-temperature protection may occur. At this time,just move the product to the normal use temperature environment and click the button to restore the output;

• lf the mobile power supply is not used fora long time, over discharge may occur. In order not to affect the performance of the mobile power supply, please fully charge and discharge the mobile power supply at least every 3 months.

Warning:

• This product contains lithium-ion batteries, the unauthorized open shell product, to avoid possible damage caused by cell or other hazards;
• Never disassemble, crush, puncture, short product, or fire or exposed to temperatures above 60 °C environment, to avoid fire hazard.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>