Pxwaxpy HX160S4 Solar Power Bank Instruction Manual
- June 15, 2024
- Pxwaxpy
Table of Contents
Pxwaxpy HX160S4 Solar Power Bank
Product Information
Specifications
- Product model: HX160S4
- Battery type: Li-polymer electric core
- Input parameter: 5V/2.1A
- Output parameter: 5V/2.1A, 5V/1A
- Dimension: 21.3mm76.2mm154mm
- Usage temperature: 0~45°C
Product Features
- Safety: Multiple protection designs handle abnormal conditions such as overcharge, over discharge, high temperature, and short circuit.
- Efficiency: Quick charging and discharging with 5V/2.1A and 5V/1A intelligent output.
- Compatibility: Embedded with an intelligent USB charge controller, compatible with mainstream mobile phones and digital devices, supporting quick charging and discharging.
- Quality: High-quality Li-polymer electric core selected with customized charging and discharging electric chip.
FAQ
- Q: How do I charge the product?
- A: Connect the product to a power adapter using a USB cable and monitor the LED light indicators to track the charging progress.
- Q: Can I charge the product using solar energy?
- A: Yes, you can charge the product using solar energy by placing the solar charging board on the front.
- Q: How do I check the remaining battery power?
- A: Tap the power indicator switch to light up the LED light. The number of lit LED lights indicates the current battery charge level.
Please read this operation instruction before using the product.
Product Ports And Features
Product Ports
Product Features
- Safety: With multiple protection designs, several abnormal conditions such as overcharge, overdischarge, high temperature and short circuit can be easily handled no matter in charging, discharging or standby state to provide reliable guarantee for your mobile phone and digital device.
- Efficiency: With quick charging and discharging efficiency, supporting quick charging and discharging, 5V/2.1A,5V/1A intelligent output.
- Compatibility: embedded with intelligent USB charge controller, compatible with main stream mobile phone and digital device, supporting main stream quick charging and discharging device.
- Quality: high-quality Li-polymer electric core is selected with customized charging and discharging electric chip.
Product Introduction
Thank you for your selection. This product is a type of high-capacity portable power source with high quality Li-polymer electric core and customized charging and discharging electric chip, which performs well in safety, efficiency and compatibility, etc.
- Product model: HX160S4
- Battery type: Li-polymer electric core
- Input parameter: 5V/2.1A
- Output parameter: 5V/2.1A,5V/1A
- Dimension: 21.3mm76.2mm154mm
- Usage temperature: 0℃~45℃
Product Operation
Power Indicator Switch
After the product stops working, the LED light will automatically turn off in about 5 seconds. To view the current remaining power of the product, you can tap the switch to re-light the LED light to view the current remaining power of the product (if there is no other operation, the LED light will go out again after about 5 seconds),gently and continuously press twice: stop charging.
Charging
Charge the product with a brand power adapter connection. LED light shows current battery charge while charging
capacity /
Indicator light| 0～25%| 25～50%| 50～75%| 75～100%|
finished charging
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | flicker| bright| bright| bright
LED3| | | flicker| bright| bright
LED4| | | | bright| bright
Solar charging
Please put the solar charging board on the front,Let the solar charging board fully receive the amount of solar energy and charge it.the corresponding relation between the displayed status and electric quantity is as follows:
capacity/
Indicator light| 0～25%| 25～50%| 50～75%| 75～100%|
finished charging
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | flicker| bright| bright| bright
LED3| | | flicker| bright| bright
LED4| | | | flicker| bright
Discharging
This product uses a smart identification charging design. When the digital product is connected with a USB power cable, the digital product can be intelligently and automatically recognized, and the charging function can be activated. LED light shows current battery charge during charging.
capacity/
Indicator light| low battery| 0～25%| 25～50%| 50～75%|
75～100%
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | | bright| bright| bright
LED3| | | | bright| bright
LED4| | | | | bright
Notice
- Please fully charge this product before first usage.
- During the usage of this product, please lighten the screen of digital product and confirm that the charging connection label is correctly displayed to ensure that the product is in normal working condition.
- During the charging for this product or charging for digital product with this product, please select adaptive connecting line by yourself.
- If the LED light of this product goes out during the charging process of the digital product, it means that the battery of the product is low, please charge it immediately.
- During the connection between the digital product and this product, the digital product has priority to use the electric quantity of this product.
- When the digital product is fully charged, please take out the connecting line in time to avoid loss.
- If the product enters into protection status due to output short circuit or other reasons (LED has no display after pressing buttons), it can be recovered by charging activation via external charger.
Warning
- Since this product contains Li-ion electric core, it’s forbidden to dismantle the product shell arbitrarily to avoid possible damage to electric core or other dangers.
- It’s forbidden to arbitrarily dismantle, squeeze, puncture this product or put it in short circuit, water, fire or exposed to an environment with a temperature higher than 60℃ (140℉).