SOLUNA VerA0 WiFi Stick User Guide
- June 1, 2024
- SOLUNA
Table of Contents
SOLUNA VerA0 WiFi Stick
Specifications:
- Product Name: SOLUNA WiFi Stick
- Model: VerA0
- Compatibility: iOS and Android devices
- Connection: WiFi
Product Usage Instructions
Step 1: Stick Logger Installation
Assemble the logger to the device communication interface as shown in the
diagram. Note the notch at the interface.
Step 2: Checking Indicator Light
Lights Implication:
- Light Keeps On: Logger connected to the device.
- Light Off: Connection to the device failed.
- On 100ms/Off 100ms (Fast flash): Communicating with device.
Fault Troubleshooting:
If the data on the platform is abnormal when the stick logger is running,
follow the steps below based on indicator light status:
Fault | COM | NET | STAT | Description | Fault Cause | Solution |
---|---|---|---|---|---|---|
OFF | Any state | Slow flash | Communicate with device abnormally | 1. Connection | ||
between stick logger and device loosen. | 1. Check the connection between |
stick logger and device. Removeand install again.
Download APP:
Method 1: Download the iOS version by searching for “Soluna eCloud” on the App Store.
Method 2: Download the Android version by searching for “Soluna eCloud” on Google Play.
Method 3: Log in to https://ecloud.solunabattery.com to download the Android version.
Frequently Asked Questions (FAQ):
Q: How do I know if the stick logger is running normally?
A: The indicator light will be off for running abnormally, slow flash for
running normally, and you can long press the Reset button for 5s to reboot the
stick logger.
Q: What should I do if the connection between the logger and router is
abnormal?
A: Check if the logger has a network connection, ensure the router’s WiFi
signal strength is strong, and make sure the wireless network is properly
configured.
Notice:
Please read this manual carefully before using products and keep it in the
place where O&M providers can easily find.
Due to product upgrade and other factors, the content of this manual might
change from time to time. Please take actual product as standard and get
latest manual from soluna. Unless otherwise agreed herein, this manual will
only be used as guidance. Any statement,information or suggestion in this
manual will not take any form of responsibility.
Without written permission, any content of this document (partly or entirely)
cannot be extracted,copied or transmitted in any form by any company or
individual.
Warning:
Please remove logger after power off.
Download APP
Method 1: Download the iOS version by searching for the keyword “Soluna
eCloud”” on the App Store.
Method 2: Download the Andriod version by searching for the keyword
“Soluna eCloud”” on the Google Play.
Method 3: log in to https://ecloud.solunabattery.com download the
Andriod version
Stick Logger Installation
Step1: Assemble logger to the device communication interface as shown in the diagram.(Note the notch at the interface)
Step2: Check Indicator light
Lights | Implication | Status Description(All lights are single green lights.) |
---|---|---|
Communication with device | 1. Light keeps on: Logger connected to the |
device.
2. Light off: Connection to the device failed.
3. On 100ms/Off 100ms(Fast flash): Communicating with device.
| Communication with router| 1. Light off: Connection to the router failed.
2. On 1s/Off 1s(Slow flash): Connection to the router succeeded.
3. Light keeps on: Connection to the server succeeded.
4. On 100ms/Off 100ms(Fast flash): Distributing network fast.
| Logger running status| 1. Light off: Running abnormally.
2. On 1s/Off 1s (Slow flash): Running normally.
The normal operation status of the stick logger, when router connected to the network normally:
- Connection to the server succeeded: NET light keeps on after the logger powered on.
- Logger running normally: STAT light flashes.
- Connection to the device succeeded: COM light keeps on.
Abnormal State Processing
If the data on platform is abnormal when the stick logger is running, please
check the table below and according to the status of indicator lights to
complete a simple troubleshooting. If it still can not be resolved or
indicator lights status do not show in the table below, please contact
Customer Support.(Note: Please using the following table query after power-on
for 2 mins at least.)
COM
|
NET
|
STAT
| Fault Description| Fault Cause| Solution
---|---|---|---|---|---
OFF| Any state| Slow flash| Communicate with device abnormally| 1. Connection
between stick logger and device loosen.
2. Device does not match with stick logger’s communication rate.
| 1. Check the connection between stick logger and device. Remove the stick logger and install again.
2. Check device’s communicat
ion rate to see if it matches with stick logger’s.
| | | | | 3. Long press Reset button for 5s, reboot stick logger.
ON| OFF| Slow flash| Connection between logger and router abnormal| 1. Stick
logger does not have a network.
2. Router WiFi signal strength weak.
| 1. Check if the wireless network configured.
2. Enhance router WiFi signal strength.
ON| Slow flash| Slow flash| Connection between logger and router normal, connection between logger and remote server abnormal.| 1. Router networking abnormal.
2. The server point of logger is modified.
3. Network limitation, server cannot be connected.
| 1. Check if the router has access to the network.
2. Check the router’s setting, if the connection is limited.
3. Contact our customer service.
OFF| OFF| OFF| Power supply abnormal| 1. Connection between stick logger and device loosen or abnormal
2. Device power insufficient.
3. Stick Logger abnormal.
| 1. Check the connection, remove the stick logger and install again.
2. Check device output power.
3. Contact our customer service.
---|---|---|---|---|---
| | | | | 1. Exit automatically after 5 mins.
Any state| Fast flash| Any state| Networking status| Normal| 2. Long press
Reset button for 5s, reboot stick logger.
| | | | | 3. Long press Reset button for 10s, restore factory settings.
| | | | | 1. Exit automatically after 1 mins.
Any state| Any state| Fast flash| Restore factory settings| Normal| 2. Long
press Reset button for 5s,reboot stick logger.
| | | | | 3. Long press Reset button for 10s,restore factory settings.
USER MANUAL for Soluna APP
Please make sure Bluetooth and WiFi are ON and the router can connect to the network normally.
Registration
- iOS: Go to ‘App Store’ download ‘Soluna eCloud’ App and register.
- Android: Go to ‘Google Play’ download ‘Soluna eCloud’ App and register.
Create a plant
Navigate to the “Power Plant” page and click on the “…” button in the upper
right corner to enter the power plant creation page.
Complete the power plant information as prompted (fields marked with “*” are required).
The information you need to provide includes:
- Select business type (default is battery system)
- Select power plant type
- Enter the power plant name
- Select grid connection type
- Enter the location of the power plant (the time zone will be automatically matched with the selected address)
- Enter the installed capacity, electricity yield, and currency type
Click the “Complete” button in the upper right to create the power plant.
Add a collector
After creating the power plant, you need to add a collector to it. Click the“
”button at the rear of the power plant, and then click the” Add collector
“button at the bottom,select the collector model, and then you can continue to
scan the QR code on the device to add it, or enter the serial number to add
it. You can enter multiple collector serial numbers at once, when the added
serial number appears above, click the “Finish” button in the upper right
corner of the page to complete the addition of the collector.
Network Configuration
Step 1: Go to “Me”, click “Config Network”, connect to the network. (Please make sure Bluetooth and WiFi are ON, and make sure your phone is connected to the correct WiFi )
Step 2: Short Press the “white button” 1-2 seconds to make the WiFi stick enter the config network state. (Please make sure that the NET light of the WiFi stick is in a quick flashing)
Step 3: Scan the Bar Code on the stick logger or i nput it manually. Check the WIFI SSID and input the password of the router, then click “Start Config”.
Step 4: Please wait for a few minute. Then click “Done” and finish the Network Configuration. Then check the data of the device on the app.
Step 5. Battery information will be displayed in 10-15 mins.
If configuration failure occurs, please check the following reas on and try it again.
- Make sure WLAN is ON.
- Make sure WiFi is normal.
- Make sure wireless router does not implement the white-black list.
- Remove the special characters in Wi-Fi network.
- Shorten the distance between the phone and device.
- Try to connect to other Wi-Fi.
Warning: Please make sure the stick logger is working properly before you leave the site. If there is anything abnormal, please do not leave the site and contact customer service at the first time.
The wifi stick is divided into the following three types
Match type | Adapted products |
---|---|
HV Pack | Soluna 6K Pack HV (L-E), Soluna 10k Pack HV(L-E), Soluna 15K Pack |
HV(L-E)
LV MOS Pack| Soluna BES-5K Pack, Soluna Planta 2.5K Pack
LV Relay Pack| Soluna EOS-5K Pack Soluna 10K Pack LV Soluna Franz 9.6K Pack LV
Please note that the parallel box does not use communication cables and brackets
If you have any technical queries about our products,please contact us and provide the following information:
Email: sales@solunabattery.com
Tel:+86-21-57475835
- Product model and serial number of stick logger.
- Product model and serial number of connected device.
Thank you for your support and cooperation!