WILCO OFFROAD Hitchgate Solo and SoloXL License Plate Relocation Kit Instructions
- June 1, 2024
- WILCO OFFROAD
Table of Contents
WILCO OFFROAD Hitchgate Solo and SoloXL License Plate Relocation Kit
Instructions
Step 1
-
Make sure vehicle is turned off and the emergency brake is set before installation.
-
Liberally grease the ½” bolt that mounts the license plate bracket to the Solo, then insert the bolt through theside of the hole on the left side of the male receiver shaft shown by the white arrow below. Use the quarter inchwasher with the ½” nut and snug it down tight. (bracket can be run in the “up” position like pictured below or flipped down as well, we recommend whatever position gives you the best clearance above and below)
-
. Attach license plate to bracket using the ¼” bolts through the front and a washer and nut on the back. Snug the bolts down so there is not wobble in the plate. NOTE: If you are installing the LED light with the bracket, mount the light between the steel bracket and the license plate.
-
Optional LED light: See instructions included in the light package to handle wiring the light to your vehicle. Some customers may consider having your local trailer supply company to tackle the wiring job.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>