Caterlite CJ107 2 Ltr Food Processor Instruction Manual

Caterlite CJ107 2 Ltr Food Processor Instruction Manual

Safety Instructions

• Position on a flat, stable

• A service agent/qualified technician should carry out installation and any repairs if Do not remove any components on this product.

• Consult Local and National Standards to comply with the following:

  • Health and Safety at Work Legislation
  • BS EN Codes of Practice
  • Fire Precautions
  • IEE Wiring Regulations
  • Building Regulations

• DO NOT use jet/pressure washers to clean the

• DO NOT immerse the motor base in

• DO NOT attempt to process items that this machine is not designed This can damage the cutting attachments.

• DO NOT feed food into the appliance by hand or objects (like knives). ALWAYS use the pusher

• Always switch off and disconnect the power supply to the appliance when not in use, before cleaning and before putting on or taking off

• Suitable for indoor and household use

• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local

• If the power cord is damaged, it must be replaced by a Caterlite agent or a recommended qualified technician in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their

• Children should be supervised to ensure that they do not play with the

• Keep the appliance and its cord out of reach of

• Do not let cord hang over edge of table or counter, or touch hot

• Be extremely careful when handling blades and inserts, especially when assembling/disassembling and cleaning after Blades are very sharp.

• Do not operate with loose or damaged

• Only use original Caterlite parts and attachments with this

• NEVER leave the appliance unattended when in

• The appliance is not intended to be operated by means of an external timer or separate remote-control

• Caterlite recommend that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Insulation Continuity and Functional

• Caterlite recommend that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your Caterlite product.

Pack Contents

The following is included:

• Motor base
• Driver
• Processing bowl
• Blade adapter
• Bowl cover
• Pusher
• Blade holder
• Slicing blade
• Coarse grating blade
• Fine grating blade
• Chopper blade (metal)
• Kneading blade (plastic)
• Emulsifying plate
• Citrus juicer attachmentCone
• Blender Jug, lid and lid plug
• Instruction manual

Caterlite prides itself on quality and service, ensuring that at the time of unpacking the contents are supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Caterlite dealer immediately.

Installation

Remove the appliance from the packaging. Make sure that all protective plastic film and plastic coatings are thoroughly removed from all surfaces. Place the appliance on a flat surface, ensuring the suction feet on the bottom get a firm grip.

Knowing the appliance

Assembly

**** Before assembly, ensure to:

• Disconnect the appliance from the power
• Clean all cutting discs and parts that come into contact with food with warm soapy For details, refer to section “Cleaning, care & maintenance”.

Never immerse the motor base in water, nor rinse it under running water.

Mounting Chopper blade| Mounting Kneading blade| Mounting Emulsifying plate
---|---|---
1.    Position Driver on motor base.

2.    Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.

3.    Place blade adaptor onto the Driver.

4.    Place chopper blade onto the blade adaptor.

5.    Turn the chopper blade to the right position.

| 4.    Place kneading blade onto the blade adaptor.

5.    Turn the kneading blade to the right position.

| 4.    Place Emulsifying plate onto the blade adaptor.

5.    Turn the Emulsifying plate to the right position.

6.    Place cover on bowl, turn clockwise until cover interlocks on bowl.

7.    Place pusher into feeding chute

Tips:

•     Always keep the chopper blade inside the bowl before feeding food.

•     Use pulse function for several times to avoid cutting too fine. Do not run for too long while cutting hard cheese or chocolate. Otherwise these materials will overheat and melt.

•     Standard chopping time: 30-60 sec

| Tips:

•     Always attach kneading blade into the bowl before feeding food.

•     Standard kneading time: 30-180 sec

| Tips:

•     Emulsifying plate can be used to mix cheese and egg, to make mayonnaise and pudding rapidly.

•     Do not use Emulsifying plate to knead flour.

sec

Cheese| 125~350ml| 20sec

Assembly

Mounting the Slicing blade/ Grating blade| Mounting the Citrus juicer attachment| Mounting the Blender jar
---|---|---
1.    Position Driver on motor base.

2.    Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.

3.    Install desired blade onto the blade holder.

4.    Place blade holder onto the Driver.

5.    Place cover on bowl.

6.    Turn cover clockwise until cover interlocks on bowl.

7.    Put food into the feeding chute.

8.    Use pusher to push food down for processing.

|

Tips:

•     Install the citrus juicer attachment as shown above.

•     For citrus juicer function, please choose low speed setting “1”.

•     For use, cut citrus fruit in half and place on the stainer cone. Then

press the fruit half gently against the stainer cone to squeeze juice.

|
Tips:

•     Choose desired blade according to food type and your desired food shape to achieve.

•     Push softly when feeding food.

•     Pre-cutting food into smaller pieces according to the diameter of feeding tube.

•     Feed gradually for better effect. When cutting soft food, choose lower speed to avoid the food turning

soupy. If large quantity food needs to process, cut it for several batches. 1200ml for one batch.

| ****

1.    Make sure the blade base is fixed tightly to the jar bottom.

2.    Put food into the jar.

3.    Install jar lid and lid plug properly.

4.    Put blender jar onto motor base vertically, then rotate jar clockwise to secure it in place.

Tips:

•     Choose PULSE function for pre- mixing is recommended before operation.

•     1800ML for one batch.

•     Lid jug can be used to measure or add ingredients during operation.

Operation

Caution:

• This appliance incorporates a protective device against high temperatures. If appliance overheats, the unit will turn off automatically. After cooling down sufficiently (about 15 minutes), it will resume operation automatically .
• DO NOT run the appliance continuously for more than 1
• If operation is not finished within 1 minute, turn off the machine and let cool for at least 10 minutes before next round of use. If more than 5 rounds of operation are required, let the machine cool for at least 90 minutes to room temperature before the next 5 This can lengthen lifespan of the machine.
• Be careful when hot liquid is poured into the bowl or blender jar as it may be ejected out due to a sudden steaming.

1. Turn the switch knob to select speed setting “0”, then plug in the
2. Turn the switch knob to select a suitable speed The relative speed indicator light will illuminate and the appliance will start to work.
3. Pulse function: Press down the switch knob and hold to Release to stop.
4. After use, select the speed setting “0”, then unplug and let the motor cool

Cleaning, Care & Maintenance

• Always disconnect from power supply before
• Always allow to cool before
• Let the motor come to a complete stop before disassembly and
• Never immerse the motor base in water, nor rinse it under running
• Use warm, soapy water and a damp cloth to clean all removable
• Dry thoroughly after

**Warning: Blade is sharp – handle with care.**

Troubleshooting

A qualified technician must carry out repairs if required.

plugged in correctly and switched on
Plug or lead is damaged| Replace plug or lead
Fuse in the plug has blown| Replace the plug fuse
Mains power supply fault| Check mains power supply
Parts not mounted securely| Mount the parts securely
Appliance stops working suddenly| Appliance overheats thus auto re-set is activated| Let the appliance cool sufficiently
Motor works while components do not run| Driver not installed correctly| Re- install the driver

Technical Specifications

Model

| ****

Voltage

| ****

Power

| ****

Current

| Processing bowl Capacity| ****

Dimensions h x w x d mm

| ****

Weight

---|---|---|---|---|---|---
Max.| Liquid
CJ107| 220-240V~

50-60Hz

| 750W| 5A| 2000ml| 1200ml| 385 x 200 x 245| 3.3kg

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead. The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:

• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N If in doubt consult a qualified

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of

this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Caterlite parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.
Caterlite products have been approved to carry the following symbol:

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>