ST life augmented AN5740 Embedded SIM Devices Instructions
- June 4, 2024
- ST life augmented
Table of Contents
AN5740
Application note
ST4SIM with Truphone ® connectivity – activation procedure
Introduction
This application note applies to the ST4SIM-200M, ST4SIM-200S and ST4SIM-200A
embedded SIM devices, which are referred to as the ST4SIM in this document.
In order to use one of the ST4SIM products, the device must be activated, and
this document describes this process using the Truphone ® connectivity.
The ST4SIM is activated according to the procedure defined in the following
sections.
General information
The ST4SIM-200A, ST4SIM-200S and ST4SIM-200M devices are based on Arm ® cores.
They provide a secure and interoperable Java ® Card environment compliant with
Java Card specification
ARM
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in
the US and/or elsewhere.
Note: Java is a registered trademark of Oracle and/or its affiliates.
1.1 Glossary
Table 1. List of terms
| Term | Description |
|---|---|
| eSIM | Embedded SIM |
| INSIDE | The integrated circuit card identifier |
| IoT | Internet of things |
| PLMN | Public land mobile network |
| SIM | Subscriber identity module |
| URL | Uniform resource locator |
Activation procedure
The activation procedure is outlined in a step by step process in the
following sections.
2.1 Retrieve the ICCID
The first step is to identify and enter the ICCID code. The ICCID is available
on the top surface of the package. The ICCID can be also retrieved directly
from the device where the ST4SIM is used. To retrieve this information, the
user must access the modem through a configured terminal on the relevant COM
port. The terminal configuration is shown in the figure below.
The ICCID is displayed after entering the AT command at AT%CCID via the
terminal console as shown in the figure below.
In the example above, the ICCID is 8944477300000021070
2.2 Connect to the Truphone ® web portal to activate the eSIM profile
The second step is to connect to the Truphone ® web portal.
The user must connect to the Truphone ® web portal https://iot.truphone.com
(using Chrome ™ ) and follow the instructions provided to create a user
account if needed. Once logged-in, the user activates the ST4SIMs from the
dashboard page as shown in the screen below.
Figure 3. ST4SIM dashboard
Click on “Activate SIMs”, and the next page appears inviting the user to enter
the ICCID of the eSIM to be activated.
Figure 4. SIMs activation screen
The activation of the SIM card may take a few minutes to complete. The SIM
card status is shown on the dashboard once it is activated.
For more details, about data plane status and other services that are provided
by Truphone ® , refer to the ® Truphone IoT web portal referred to above.
Note: The URL quoted in this section belongs to a third party. It is
active at document publication, however, STMicroelectronics shall not be
liable for any change, move or inactivation of the URL or the referenced
material.
2.3 Perform a network search and registration
The third step is to connect and register to a cellular network. To force the
device to search and register to a cellular network (also known as PLMN
selection), the user simply needs to reboot the device. The first time the
board registers on the network may take several minutes to find a network and
register. This may take between 15 and 20 minutes. The registration is based
on the radio environment, Truphone ® network availability and the technology
of the network being used. To speed up the network search, the user may follow
the tips that are provided on Truphone ® web portal.
Revision history
Table 2. Document revision history
| Date | Version | Changes |
|---|---|---|
| 22-oct-2021 | 1 | Initial release. |
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make
changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should
obtain the latest relevant information on ST products before placing orders.
ST products are sold pursuant to ST’s terms and conditions of sale in place at
the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST
products and ST assumes no liability for application assistance or the design
of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted
by ST herein.
Resale of ST products with provisions different from the information set forth
herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST
trademarks, please refer to
www.st.com/trademarks. All other product or
service names are the property of their respective owners. Information in this
document supersedes and replaces information previously supplied in any prior
versions of this document. © 2021 STMicroelectronics – All rights reserved
AN5740 – Rev 1 – October 2021
For further information contact your local STMicroelectronics sales
office.
www.st.com
Documents / Resources
| ST
life augmented AN5740 Embedded SIM
Devices
[pdf] Instructions
AN5740 Embedded SIM Devices, AN5740, Embedded SIM Devices
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>