SMART PQX-2 Board QX RX Series Pen User Guide
- June 1, 2024
- Smart
Table of Contents
SMART PQX-2 Board QX RX Series Pen
Product Specifications
- Model: PQX-2
- Power Source: Lithium AAA Battery
- Regulatory Compliance: FCC, ISED, EU, UK
- Transmitting Band: 2402 – 2483.5 MHz
- Maximum Transmit Power: 7 dBm
Product Usage Instructions
Certification and Compliance:
Ensure that the SMART Board QX/RX Series Pen complies with FCC, ISED, EU,
and UK regulations for safe operation.
Hardware Environmental Compliance:
Dispose of the product in an environmentally friendly manner. Follow local
regulations for electronic waste disposal.
Battery Handling:
The SMART Board QX/RX Series Pen contains a Lithium AAA battery. Dispose of
batteries properly according to local regulations.
FAQ:
Q: How do I access the regulatory information for the SMART Board QX/RX Series
Pen?
A: To view the regulatory information:
- From the Home screen, select the Settings icon.
- Select About.
- Select Regulatory Information.
Q: What should I do with the product at the end of its life cycle?
A: Dispose of the SMART Board QX/RX Series Pen in the appropriate recycling
stream following local guidelines for electronic waste disposal.
Q: Can I replace the battery in the SMART Board QX/RX Series Pen?
A: Yes, the pen contains a replaceable Lithium AAA battery. When replacing the
battery, ensure proper disposal of the old battery.
Certification and Compliance
SMART Board QX/RX Series Pen
Model: PQX-2
View an electronic version of the display’s regulatory information You can view an electronic (e-label) version of the SMART Board QX or SMART Board RX series display’s regulatory information from the display.
- From the Home screen, select the Settings icon .
- Select About.
- Select Regulatory Information.
Federal Communication Commission interference statement
FCC Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information Unique Identifier: PQX-2 Responsible
Party – U.S. Contact Information SMART Technologies Inc. 2401 4th Ave, 3rd
Floor Seattle, WA 98121
compliance@smarttech.com
Contains FCC ID : QCI-PQXMOD1
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note
- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
Innovation, Science and Economic
Development Canada statement Contains IC: 4302A-PQXMOD1
This device complies with RSS-247 of the Innovation, Science and Economic
Development Canada Rules. Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation exposure statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
EU and UK Declaration of Conformity
Hereby, SMART Technologies ULC declares that the PQX-2 complies with Directive
2014/53/EU.
The full text of the EU and UK declaration of conformity is available at the
following Internet address:
smarttech.com/compliance
Warning
- Operation of this equipment in a residential environment could cause radio interference.
- The frequency band and the maximum transmitted power in the EU and UK are listed below:
- Transmitting Band (MHz) Maximum Transmit Power (dBm)
- 2402 – 2483.5 7
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold, and disposed of in a safe and environmentally friendly manner.
- Waste Electrical and Electronic Equipment (WEEE) Electrical and electronic equipment and batteries contain substances that can be harmful to the environment and to human health. The crossed-out wheeled bin symbol indicates that products should be disposed of in the appropriate recycling stream and not as regular waste.
- Batteries The SMART Board QX/RX Series Pen contains
- Lithium AAA battery. Recycle or dispose of batteries properly.
- More information See smarttech.com/compliance for more information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>